20 Most Recent Krell Home Theater Standard 7.1 7.1-Channel Amplifier Questions & Answers


You will need to use the pre-outs on the receiver to hook up your amplifier. I am trying to verify if that model even has pre-outs for the front channels, many do. You will be able to tell quicker than I can by just looking for outputs labeled pre-out for the front channels. Just use the cables you have to attach the Krell amp to those pre-outs and you will be good to go. Let me know if you are unable to locate them... the receiver may not be designed to do that..

Tim

Krell Home... | Answered on Sep 15, 2010


take off the lid and check the fuse,,,

Krell Home... | Answered on May 17, 2009


Hi There WLAW,
I am in Auckland NZ and do repair work for a high quality Amplifier chain so I could have a look at yours for you....

Being Local in Auckland it will save you sending it away off shore to Australia.

Cheers From YUBEUT (09) 357 7496

Krell Home... | Answered on Jan 14, 2009


At this point you may have fried the output stage. Is there a specific model listed on the back? I need that to locate the schematic.

Thanks,
Dan

Krell Home... | Answered on Nov 07, 2008


I have 20 year exp. with Krell. Contact me directly.
Steven Leckrone
The Service Department
203-331-0671
sleckrone@snet.net

Krell Home... | Answered on Oct 22, 2008


try subbing out another newer speaker for the left one ? if sound returns then that older speaker is defective .

Krell Audio... | Answered on Nov 12, 2016


Fuses rarely go on their own. The cause is likely to be a shorted semiconductor device in the left channel output.
Fuses are generally not specific to any brand. Is the fuse a tube with metal ends? If it is measure the length in MM. Then look at the end and you should see the rating. Either in A for Amps or MA for milliamps.
Any electronic parts supplier should have the one you want in stock. Buy several, for if the part I mentioned has gone, it will blow again.

Krell Audio... | Answered on Sep 16, 2016


http://www.manualslib.com/manual/90296/Krell-Industries-Ksa-100s.html?page=18#manual Look on page 18

Krell Audio... | Answered on Sep 10, 2016


Thai will require removal of the top cover to move jumpers or program dip switches in proper order. This will be explained in the owners manual which is located at Krells web site.



Steven Leckrone
The Service Department
30 Unquowa Hill St
Bridgeport CT 06604
203-331-0671
Steven@theservicedepartmentct.com

www.theservicedepartmentct.com

Krell Audio... | Answered on Nov 14, 2014


Chances are that you have a "Leaking" capacitor in the final stage.

Time for the repair shop :(

Krell Audio... | Answered on Jun 14, 2014


Audio output section circuit draws enormous current at idle stage. Contact any service electrician to detect the fault and get it repaired. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

Krell Audio... | Answered on Apr 01, 2014

Not finding what you are looking for?
Krell Home Theater Standard 7.1 7.1-Channel Amplifier Logo

Popular Tags

8 questions posted

Ask a Question

Usually answered in minutes!

Top Krell Audio Players & Recorders Experts

80stech

Level 2 Expert

120 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Krell Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Krell Audio Players & Recorders

  • Krell Audio Players & Recorders

Most Popular Question

wiring diagram required

  • Audio Players & Recorders
Loading...