Tip & How-To about NetGear ReadyNAS Duo RND2150 NAS server (S6819023) Network Storage Server
Steps on how to set your Readynas to telnet mode.
note : this is only for desktop type of Readynas
1. Turn off the nas
2. Get a pen or a paper clip that will fit on the reset button.
3. Hold the reset button while the power is off.
4. Turn on the Readynas after 30secs but still holding the reset button
5. You will only release the reset button after the 3rd blink on the drive lights.
test telnet by going to the dos prompt.
Click start run, cmd,.
Type telnet ip address of your Readynas.
you can also use a 3rd party software like putty
Posted by Anna on
Jul 26, 2010 | Cisco 2106 (AIR-WLC2106-K9)
Jan 05, 2010 | NetGear READYNAS DUO RND2110 1000 GB...
Aug 19, 2008 | Ricoh Office Equipment & Supplies
Mar 04, 2008 | HP LaserJet 1320 Printer
6,659 people viewed this tip
Usually answered in minutes!