Question about Ademco Home Security

1 Answer

I need the default installer's code no for a DAS DL200 alarm system?I have the installer's manual but it does not have the number. The client has moved into a new house with this type of panel and the previous tenant cannot recall the personel pin. further do you know where I can get a key to open the panel?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 591 Answers

The key for the panel is supplied from the distributor and you need to be a certified installer to open an account and buy one, A good old big flat screw driver will open the pannel as well but the lock will be useless after that LOL! (you could screw the dore shut with #6 sheet metal screws after) than you can go on the Ademco's web site to serch for the default code of your alarm panel model but if the installer changed it than you have to reset the panel to factory default and re-program it... (unless the installer activated the installers lock up) than you need the code from the last installer that serviced the panel... if not than you need to send the board to Ademco to have it unlocked or change the board for a new one... (you will still have to re-program everything from scratch...

That's what security is all about!!! $$$$

THE BEST WOULD BE CONTACTING THE LAST INSTALLER FOR SERVICE...

Posted on Aug 06, 2011

  • Tommy
    Tommy Aug 06, 2011

    back 15 years ago when a pannel was LOCKED by the technician, we use to unsolder and replace the EPROM chip on the board and it worked but nowdays it's different... often the EPROM is built in a custom CPU and changing that is a pain...

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I reset the Master code in DAS NX-4--8 alarm system when the existing Master Code is not known ?


Be sure you understand the difference between a master code and the technician code. A master code lets you program other codes (and do some other harmless stuff). The technician code lets you do anything in the panel. If no master code is known you will need to default the panel. Do that by turning off power and disconnecting the battery. Reconnect the battery or plug pack and within 10 seconds enter 971300 on the code pad. That will wipe the eeprom back to factory defaults, and reinstate user 1 as a master code with a value of 1234. Don't even think of doing any of this without an INSTALLER manual. (Not the same thing as the USER manual). Better still, get an alarm tech familiar with DAS or CADDX products to program it for you. Worth every penny. After that you can add/delete users with your own master code using the much simpler User manual. Any code can be set to be a master code (that is you can have more than one master code)

Jun 25, 2014 | Home Security

1 Answer

Need to install "default mail client" properlly


That all depends on what mail client you wish to install.
If you wish to use Microsoft, to to the microsoft site and download and install Windows Live Mail. Once you download it and let it install, it will work.
You apparently have a corrupt mail client on your system.

Feb 16, 2012 | E-Machines eMachines Desktop PC

2 Answers

I accidentally locked myself out of my Smarthhome Securelinc Alarm Installer Code Model OH-41073AT. I would like to reset the unit to my installer code or create a new one. Can you assist?


The first thing to try would be to disconnect the mains supply and remove the internal battery for a minimum of 5 minutes and then reconnect it.

If this doesn't reset the system then remove the mains supply and battery again for another 5 minutes.

After 5 minutes reconnect the battery.

Then with the help of a friend try holding the # & * keys while they turn the mains supply back on.

These are generic resets for most house alarms but I'll keep looking if there's a specific one for your system so if neither of these work just let me know.

If I find anything else in the mean time I'll add to this post.

Jul 06, 2011 | Visonic INC Smarthome SecureLinc Wireless...

1 Answer

Have a code alarm for car remote dont work and cant disable it. wont start how do i disconect alarm so car will start


Provided that your system is not programmed for coded override, the standard emergency override is as follows:

1. Enter the vehicle (the security system will trigger.)
2. Locate but do not press the valet/override switch yet (it should be a small black button installed under the dash within reach of the driver)
3. Turn the ignition key to the ON position.
4. Press and release the emergency override button (The security system will turn off).
Note: If the automatic arming feature is enabled on your system. The security system will re-arm the next time the ignition key is turn off and the vehicle's doors are closed.


If the coded override feature was enabled by the installing dealer, you will need to follow these procedure:

1. Enter the vehicle (the security system will trigger).
2. Locate but do not press the valet/override switch yet (it should be a small black button installed under the dash within reach of the driver)
3. Turn the ignition switch to the ON position.
4. Within 5 seconds press the emergency override button the number of times corresponding to the first digit of your personal code (Default digit is 1).
5. Within 5 seconds turn the ignition key OFF, then ON.
6. Within 5 seconds press the emergency override button the number of times corresponding to the second digit of your personal code (Default digit is 1).
7. Within 5 seconds turn the ignition key OFF, then ON.
8. If entered correctly the security system will turn off.
9. Turn the ignition key to the OFF position.

If the coded override feature is enabled and the code is lost, the system will need to be reprogrammed by an authorized dealer.

Aug 03, 2010 | Audiovox Prestige Code Alarm Remote Alarm...

3 Answers

GE Simon 3 Alarm: Reseting Dealer and Installer Code!!


Here is the manual. See System Programming on page 11 for default codes.

Dec 21, 2009 | GE Security Simon 3 Wireless Home Security...

1 Answer

Installer Code needed for Bosch Security System Ultima 880


Only way is to factory default the unit and then only if the installer code was not locked. Either way the system will need reprogramming.You will need the instalation manual for this or you can try ringing Bosch Technical as they can remotely access systems if set up to do so.
Worth a call either way browse for your local agent.

Oct 11, 2009 | Kitchen Appliances - Others

1 Answer

Where will if find a copy of the Chubb Secure 6000 user manual??


Chubb Secure 6000 is actually just a rebadged / rebranded DAS-NX12.

Do a web search for "DAS NX12 manual" and you'll find all sorts of manuals including installation manuals and user manuals.

If you see the pictures of the DAS NX12 keypad in the manual you'll see its identical to the Chubb Secure 6000.

Jul 09, 2009 | Home Security

2 Answers

Want to program telephone number in GE Simon 3 system


Hi,
You need to get the ''installer code'' from your alarm company in order to go into the programming of your system and do the change...and of course the programming manual, please be advised hat if you make any change to your system and something goes wrong your alarm company could charge you in order to fix the problem. Legally, IF you bought the system, you are entitled to get the installer code, the alarm company can't even think to argue about that!.

Thanks,
Lucus123

Mar 26, 2009 | GE Security Simon 3 Wireless Home Security...

Not finding what you are looking for?
Home Security Logo

Related Topics:

1,151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ademco Home Security Experts

Sean

Level 2 Expert

80 Answers

oooga boooga
oooga boooga

Level 1 Expert

8 Answers

Vincent Migliore
Vincent Migliore

Level 1 Expert

36 Answers

Are you an Ademco Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...