Question about Hobart A200 Stand Mixer

1 Answer

Hello, my Hobart AE200 seeps oil from the front panel. How do I top it up? How often does the oil need replacing and with what type of oil? Thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 44 Answers

It's not oil in the A200, it's #2 weight grease. Although when it gets old enough it can break down far enough to basically become oil (either that or someone put oil in it previously). There are a number of answers written on fixya.com explaining how to disassemble the transmission and change the grease. Fill with 36 ounces #2 grease. FYI : disassembling the transmission and changing the grease is a very messy task and one can VERY easily reassemble the transmission incorrectly, so consider bringing the mixer to Hobart to have the job done.

Posted on Sep 02, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ae200 hobart mixer agitator beater shaft


http://thesmartpartsestore.hobartservice.com/

Sep 02, 2015 | Hobart Food Mixers

1 Answer

Hobart AE200 gave a little sproing and stopped turning on all gears (electric motor turning fine apparently). I figure ?maybe it's the tufnell cog that's broken, but I can't get the inner plate off to...


The problem you are describing if I follow right I take the grease hole plugs out take the two spanner nuts off the man shaft and the driven shaft stick gear puller jaws into grease hole and put the gear puller onthe center saft and gently raise the top case.

Apr 18, 2011 | Hobart A200 Stand Mixer

1 Answer

Looking for a safety guard for hobart mixer ae200


www.hobartservice.com Click on locate an office and enter your zip. The office will be glad to install one for you. I do not believe they will sell you one. They have to install it. But it doesn't hurt to ask.

Feb 11, 2011 | Hobart A200 Stand Mixer

1 Answer

PLEASE HOW TO CHANGE OIL OF A HOBART MIXER H-600 C Cooper Lebanon PA


underneath trans. you will find a drain plug remove, drain oil,replace plug ck the sight glass @ this time if not clear would recommend replacing glass remove top cover where the front cover screw theaded into remove that is your fill hole. add new oil till you hit level line in sight glass,reassemble

Dec 31, 2009 | Hobart Food Mixers

1 Answer

Howdy, We have a Hobart H600 mixer and it looks like it needs oil. Where do I add the oil and what type should be used? Wesley McMenamins Pubs & Breweries


take off top cover, where the front screw on top cover threaded into is the fill plug for the trans.drain oil replace drain plug , also ck. sight glass if dark or cloudy replace,@this time.trans. oil can be bought @ any hobartoffice the part# for the trans. oil is102973-66 that will come in a 128 oz bottle you will not need all of it. pour a little @ a time till oil hits line on sight glass. please vote thanks

Oct 16, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart mixers A120 & A120T.. has an oil leak. Need Seal kit/repair parts info and type of oil to replace.


You need to take the old grease out and replace it with new and then replace the oil seal
by the way it is messsssssy

Jul 17, 2009 | Hobart A200 Stand Mixer

1 Answer

I need to change gear oil in Hobart H600 mixer.


Take the top cover off,where the front screw on the cover goes in that long shft has to be unscrewed,get a funnel and add oil.

Feb 19, 2009 | Hobart H600 Stand Mixer

3 Answers

Spare parts


I just took a look at the www.hobartcorp.com web site and found a lot of parts lists. I did't find the AE200, but there were several listings for A200. You can ask Hobart if the A200 and the AE200 are the same on the inside.

Barry

May 17, 2008 | Food Mixers

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

Related Topics:

793 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...