Question about Dell OptiPlex 380 PC Desktop

1 Answer

Having recently received a batych of new optiplex 380's we have been having trouble recalling images from a 3rd party software package. The older model dell units work perfectly fine and recall the images in approx 7 seconds, but on the new 380's it is taking in excess of 40 seconds to recall the image. This is very strange and is only effecting the new batch of 380's. are there any known issues with the ethernet connections/drivers that may be causing this problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dell Master
  • 55,370 Answers

The third party software may need updating.

Posted on Sep 23, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
myob247

Georgia B

  • 1342 Answers

SOURCE: Optiplex 560 Power Intermittent

Try updating the BIOS. Seems there were some advanced power management improvements.

Dell Downloads

The following changes were made to the A04 BIOS for the A06 BIOS: 1) APM issues device commands in SMM. 2) Fixed APM to issue power up/down commands to peripherals in SMM. 3) Turbo/Deturbo switching done in SMM. 4) Implemented <\> Turbo/Deturbo hot key. 5) Password checked after exiting Setup and before OS booting. 6) Fixed the problem with #9 GXE64 Video card losing its video at the end of POST. 7) Fixed the problem with WINICU having General Protection Failures. 8) Fixed the problem with Real Time Clock not being updated correctly when in Power Managed mode.

Posted on Jun 03, 2008

chinmay_lp

Chinmay patil

  • 271 Answers

SOURCE: require drivers for bel ethernet controller in

Hi
Here is the link to download your drivers.

Dell Driver

Thanks

Posted on Mar 19, 2009

Anonymous

  • 73 Answers

SOURCE: Dell Precision M70 - Ethernet Port not recognised

if the laptop is wifi enabled there is no need o connect it through the Ethernet cable it will just pick up the signal and you will have to put in the pass code. Even if you want to connect by Ethernet cable you should be able to just plug it in and get on the internet.
if the problem is you don't know the pass code it should be on the original modem manual.

Posted on May 04, 2009

Anonymous

  • 52 Answers

SOURCE: ethernet communcation troubles

This is a winsock error. You need to reformat your computer and reinstall Windows

Posted on Jun 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp laser jet 3500 printer has an error code 59,99 what can i do /


main motor has failed to reach revolution within specified time- in other words - something is siezed solid and is preventing the machine from turning over into normal warm up operation-
suggest if you have recently replaced a toner cartridge/ fuser/ Image transfer belt then remove the new item and cycle the power without the unit installed. if tour machine warms up then complains about no cartridge then you have confirmation of the new unit being faulty-
if you are using 3rd party toners/ fusers then that could also be your problem. 3rd Party toners do NOT save money rather they will incur repair costs as they are not correctly prepared for re-use.

Jan 16, 2014 | Office Equipment & Supplies

Tip

Your Outlook stops sending your Comcast emails


So over the past few years Comcast has updated security measures in the POP3 email server. Some of these updates look to be directed at 3rd party email software end users like to fetch their mail off the Comcast server.So they have sent out notices regarding "work arounds" for the issue of getting an error response "authentication needed". Now please note folks like every other ISP Comcast does not guarantee or support 3rd party vender software you obtain with your PC or have purchased anywhere but from Comcast.
3rd party would be anything that the ISP does not maintain or have rights to that an end user "YOU" have purchased from another software vender.The original setup for 3rd party email clients "Outlook mainly" which used to be supported in years past was:
Incoming-mail.comcast.net
Outbound-mail.comcast.net
Now the incoming has remained the same throughout however outbound has changed a couple of times to smtp.comcast.net. So recently I seen the new outbound they wanted changed to imap.comcast.net
So I tried this and it just didn't work and I went back to the smtp.comcast.net. Here as of today I realized my outbound again stopped working. So what has happened now the server wants to look at your user name and password a second time as well the outbound listening port which always worked on port 25 now likes port 587.
Here are the steps to make these changes to your Outlook email client.
Open your Outlook click "tools" then "account settings" click on your email address your using for Comcast. Bottom right click "more settings" click "outgoing server" click the tab that says "My server (smtp) requires authentication" click "log on using" fill in the user name and password for your Comcast account minus the @comcast.net it does not need your email routing extension here.
Now click OK and go back in the same way you just did except instead of clicking the "outbound server" choice the last tab that says "Advanced" The only thing your going to change here is the "outgoing server (smtp)" from 25 to 587. Click ok and that's it your done.

on Apr 03, 2015 | Comcast XFINITY

1 Answer

I cannot reset my boot screen logo


Where you logon?
Yes? - You used 3rd party personalization software. Use it to change it back.

No? - Go to Start > Control Panel > Display. Choose Desktop and select Background of your choice. XP only!

If it the BIOS boot logo, you did a no no.

Oct 10, 2012 | Dell OptiPlex SX280 PC Desktop

1 Answer

Just installed a brand new motherboard for my dell computer, new processor and new fan, everything is working but the fan, what's the issue and how do I fix it?


is the fan plugged into the correct port of the motherboard?
Did you install the reccomended OEM motherboard or a 3rd party motherboard?

Aug 13, 2011 | Dell OptiPlex GX270 PC Desktop

2 Answers

I have had my Garmin for four years. Recently it has started shutting off when I'm driving with the set plugged into the adapter outlet. If I press the power switch, it will reboot, but then after a...


Garmin is voluntarily recalling certain nuvi devices that contain a specific battery that was manufactured by a third-party supplier within a limited date code range.
Garmin has identified potential overheating issues with the use of these batteries in certain nuvi devices with a specific printed circuit board (PCB) design. Additional information about the nuvi battery PCB recall can be found in Service Alert Number: 1035.

The models that may be impacted by the nuvi battery PCB recall are the 200W, 250W, 260W, 7xx and 7xxT (where xx is a two-digit number). To determine if your unit is affected, please visit www.garmin.com/nuvibatterypcbrecall and enter your nuvi's serial number. If your unit has the specific PCB design and contains a battery from the specific date range, you will be given instructions on how to return your nuvi for a battery replacement at no charge.
You should not attempt to remove or service the battery on your own; all battery replacements must be serviced through Garmin's authorized service provider.
If you do not have web access, you may contact Garmin through one of the phone numbers below:
  • In the United States and Canada, call (866) 957-1981
  • In North America and South America outside the U.S. or Canada call (913) 397-8200
  • In Europe, Middle East, and Africa, call +44 870 850 1242 or 0808 238 0000
  • In Asia, call 886/2.2642.9199
  • In Australia, call 1800 113 738; and in New Zealand call 0800 427 652
Repair time will vary based upon location. U.S. customers, please allow 10-16 business days to receive your repaired or replacement device. Canadian customers, due to increased shipping and customs clearance times, please allow 20-30 business days to receive your repaired or replacement device.

Garmin sincerely regrets the inconvenience that this recall has caused and is making every effort to cooperate with customers, dealers, and regulatory agencies worldwide to ensure all parties are assisted according to national regulatory standards

May 24, 2011 | Garmin Nuvi 660 GPS Receiver

1 Answer

I want to run Win Server 2008 Enterprise edition on Dell Optiplex 360. I need the drivers for: NIC, Audio, Video. Thank you


Hello,

Verify that your hardware is compatiable to the Server NOC. (Most are 64-bit software which require 64-bit compatiable software. When you place the server dvd/cd in the 1st time, it will check your system to make sure it meets the minimum requirments for install. If you already have the server os installed, You have 2 chioces: 1. Microsoft Server drivers (Microsoft support) or 2: Download each vendor's drive to your system or portiable drive and install as the server os is installing. (it will ask for 3rd party drivers at the start of install.

Good Luck
C2Solutons

Jan 22, 2011 | Dell OptiPlex 360 Desktop Computer

1 Answer

Im having ubuntu 8.10 but icant play games online cause its asking adobe flash player please help


Great that you support Open Source! However, there are some flavours of Linux that do not yet support flash player. This flavour of Linux has a unique certification system for 3rd party software!

The package-Ubuntu-restricted-extras includes Adobe Flash player plugin, MS TrueType core fonts, Sun's Java Runtime environment, rar/ unrar and also some other codecs ( videos/ media )!

However, there are some 3rd party application suites available for purchase through its Canonical Ltd ( web-based ) store!
http://www.canonical.com/

Feb 27, 2009 | Computers & Internet

1 Answer

Bluetooth


Email Restarts phone.
Sprint said make a new user because of 3rd party software but won't help otherwise.
Bluetooth won't work with my Pioneer DVD in dash Car receiver either.
Works with my Jabra headset though.
What gives? Any software I can download to fix?
Thanks

Jun 16, 2008 | Palm Treo 500 Centro

1 Answer

Off road maps or google earth image


You need to use a thrird pary software package called Tyre whic is free to downlaod and use. It's seems to work quite well.

Software Link:
http://www.janboersma.nl/gett/index.php

Jan 02, 2008 | Tomtom Navigator Bluetooth GPS Receiver

1 Answer

3rd Party application failure


First, reinstall the 3rd party conduit and related application. Next, check with the developer of your conduits to see if they have a patch or information on their software and the new Palm Desktop. If the problem persists, try the following: 1. Backup the c:\palm directory 2. Uninstall all 3rd party conduits 3. Uninstall Palm Desktop 4. Re-install Palm Desktop 5. Re-install all 3rd conduits. 6. Synchronize to test.

Sep 07, 2005 | Palm Tungsten T5 - Multilingual Handheld

Not finding what you are looking for?
Dell OptiPlex 380 PC Desktop Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...