Question about Hunter 21871 56'' Ergonomic Brushed Nickel Ceiling Fan
On the fan, the sensor that picks up the signal, usually a black box, it has switched on it, you need to switch the knobs to another channel or set up and also make one remote control match that configuration or channel, that will separate the fans and make them work independently
Posted on Jan 07, 2018
Contact Hunter. There may be an alternate code for the remote
Posted on Jan 07, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: ceiling fan
hi you have a problem with your fan do you have the remot book how to operate the fan remote we lost the booklet for the instruction maybe you can send me a copy of your booklet instruction for the fan is your fan is from the compagny home collection and the brend or model tampa thank you
Posted on Nov 25, 2007
The receiver is at the bottom of your fan (just above any light kits), inside a round case about 4 inches tall. You will have to take 3-4 screws out and inside you will see the receiver. It should have an electrical connector going to it with dip switch as well. It will pull right out of the case.
By the way, I am having the same problem and am trying to get ahold of Hunter for a new receiver.
Posted on Jun 19, 2008
I have the same problem, except I live in a multi unit condo where many of the occupants own the same fan! You can imagine how frustrating this is when your fan or light comes on or you can't agree on a fan speed. Anyway, I spoke to a MinkaAire customer service guy and he tells me that the switches in the receiver are located under the mounting ring. You need to unscrew the ring and it should be located in there. I haven't tried this myself as my fan has a mind of its own as I type and everytime I turn it off to unscrew the mounting ring, the damn thing turns on again.
Posted on Sep 04, 2008
You can hard wire this fan to 1 or 2 switches, bypassing the remote unit entirely. NOTE: You will only have 1 fan speed and no light dimmer. Set the fan at the desired speed and direction using the remote system PRIOR to hardwiring. The fan will remember the speed and direction.
Connect your house wiring directly to black and white (and blue if lighting is required) wires. With a 2 switch system, your third house wire should be red. Connect the blue fan wire to the red house wire.
Your 2 switches will now separately operate the fan and light functions. As stated earlier, you will only have 1 fan speed and will be unable to change the direction, so set your desired speed and direction before you rewire.
Hope this help!
Posted on Nov 30, 2008
I have the same fan. The fan and the remote have some "jumpers" which allow you to change the codes, useful if someone else nearby has the same fan. You can see the jumpers inside the remote, open the back cover... you'll see "4 3 2 1" on the circuit board. Unfortunately you'll need to dismount the fan to change its jumpers, they need to be the same as the jumpers in your remote (which you can move around pretty easily).
Posted on Jul 03, 2009
Tips for a great answer:
Apr 29, 2017 | Hunter 27148 Remote Control
Jul 23, 2011 | Hunter Heating & Cooling
Jun 01, 2011 | Universal Remote Control Hampton Bay...
Sep 30, 2010 | Hampton Bay Dryers
Jun 03, 2010 | Universal Remote Control Hampton Bay...
Apr 23, 2009 | Hunter Ceiling Fan Light Remote Control
Sep 07, 2008 | Hunter 22451 The Brookline Brushed Nickel...
Aug 22, 2008 | Minka -Aire Brushed Nickel Remote Control...
Jun 16, 2007 | Hampton Bay AC438-VPW 52'' Vintage Pewter...
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: