Question about Lexmark X4650 InkJet Printer

1 Answer

The printer was printing OK. Suddenly the paper refeed into the printer. I removed the paper but now the printer is not feeding paper. I think I may have move or disloged a sensor in the paper feeder area, because when I try to print now, I get error message "out of paper" although there is paper in the feeeder.

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 3,344 Answers

Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.



If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Posted on Sep 01, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my printer making really loud grinding noise and will not feed paper or print


It sounds like a bit of paper is stuck somewhere in the paper feed route. Remove the toner cartridge and any other bits that pull out. Removable bits often have a green tag or finger grips moulded in to them. Do a careful check in the printer for any bits of paper or even a full sheet stuck somewhere. Carefully remove all rubbish and reassemble.

Dec 01, 2014 | HP LaserJet 1018 Printer

1 Answer

Paper feed does not pick up properly


Clean the tray paper feed roller rubber,or try using the bypass tray(manual alimentation).

Apr 22, 2013 | Samsung SCX-4521 All-In-One Laser Printer

1 Answer

Printing doesnt start at top of page


Sure the paper is correctly document may be the printer thinks the paper is metric instead of inch check the printer setting

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Jul 12, 2012 | Minolta magicolor 2400W Laser Printer

1 Answer

I have a Dell 5210N mono printer. And I want to use the manual feed tray as a second paper drawer for letterhead paper only, ie leave a whole stack of paper in the manual feed. Then when I select manual...


Check the software provided or installed on your Computer you use for work(printing software), look for print properties, check for print settings, look for manual Feed, Under manual Feed, set it for letterheads, however this has to correspond with the Applications you are using to print letterheads out of( under print, into the preferrences you should be able to have the settings as well). If your printer software does have these settings, then you will have to do it Manually upon every print.

Dec 03, 2010 | Dell 5210n Laser Printer

1 Answer

Hp Deskjet F4480 continually reads out of paper even though its not and will not print. This problem occured only after I refilled the cartridges and put them back in.


Ok, I had this problem too and it started after I replaced the ink cartrtidges. The printer had a flashing light and the software read "out of paper". I can't be exactly sure what fixed it but here's what I did: I unplugged the printer while it was still on and left it unplugged for several hours (several minutes should have the same effect of clearing the device's memory, I just had to go to a meeting). I then plugged it back in and the printer fed the paper, but was feeding it sideways. I removed that paper and put a single piece of 4x6 photo paper in it and it fed that paper sideways also, crinkling it up. I tried a few more times by hitting the 'Cancel' button which would cause it to try to refeed the paper. I then checked the back of the printer and discovered the back panel had come loose at some point. I replaced it and the printer then fed a sheet correctly and printed the alignment page. I think the thing that fixed the issue was leaving the machine unplugged for awhile.

Feb 07, 2010 | HP Office Equipment & Supplies

1 Answer

Brother mfc-7420 printer - manual feed instead of automatic


ok, thank you

you probably had a document that was not using 8.5 x 11 paper or the print settings were the printer to use the manual tray.

thanks adi

Apr 02, 2009 | Brother MFC 7420 All-In-One Laser Printer

1 Answer

Paper jam cleared from back, but printer thinks it is still there


HI

please change the usb cable.. it will work.. and restalled that software cd also..

do it.........

Nov 18, 2008 | HP Photosmart 3310 Printer

1 Answer

Printer fails to feed paper for printing


try gently rubbing the take up roller with a damp cloth - let dry and try with no more than fifteen or twenty sheets of paper in the feed tray

Oct 29, 2008 | Kodak Easyshare Printer G600 Thermo...

1 Answer

Paper feed jamming problem


had this problem also try looking for a tiny piece of torn paper in the feed wheel and remove the snag

Aug 30, 2008 | Lexmark X5470 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X4650 InkJet Printer Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...