Question about Lexmark X4650 InkJet Printer

1 Answer

My Lexmark printer is saying its out of paper and theres paper in the feeder, please help!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Hey friend, you can try this one.

  1. Press the power button (Which will turn off printer.)
  2. Wait till flashing stops and printer is completely off.
  3. Press the same button which will turn on the printer.
  4. The Printer should automatically go back to printing.
  5. If it does not - Manually try printing by your self.

Posted on Sep 02, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark x6650 won't take paper correctly


Leading cause of paper jams or misfeeds is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Jan 23, 2012 | Lexmark X6650 4-In-One Wireless InkJet...

1 Answer

Rint,copy,scan or fax on my x5470 lexmark all in one. I unplug and restart compture and the fax still says paper jam check rollars dont see noughting.


Leading cause of paper jams is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Dec 09, 2011 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Printer says I have Paper lock.There is no Paper in the Printer.How can I get rid of the setting ?


If you are referring to a "Paper Jam" error, please follow the steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print a document again to verify that the problem is fixed.


If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Sep 03, 2011 | Lexmark S305 IMPACT LEXS All-In-One...

1 Answer

Printer keeps saying printer is out of paper but i have paper in the printer.


Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.


If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Aug 24, 2011 | Lexmark X4530 InkJet Printer

1 Answer

Paper keeps turning and jaming up then it says paper jam or out of paper


Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again.


If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Aug 22, 2011 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Printer saying paper jam when there is nothing? I need to fax some stuffs out, please help me. Aloha, Kapua Gordon


Please remove the sheets of paper from the feeder. Open the printer cover and remove the cartridges. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, re-insert the cartridges. Close the cover. Load some paper but don't overload. Try to print again.

Jun 23, 2011 | Lexmark X5650 All-in-One InkJet Printer

1 Answer

@my Lexmark says there is a paper jam but I find no paper anywhere!!?????


There could be some sort of foreign object that accidentally fell into the paper feed system. Remove the sheets of paper from the feeder. Grab a flashlight and take a look into the feeder for any debris. If you're willing and capable, carefully turn the printer upside down. Any foreign objects in the feeder should just freely roll out from it. If none, open the cartridge area and remove the cartridges. Check inside for any foreign objects that could cause this problem. If none, close the cover. Unplug and replug the printer into the power source to reset it. When the printer turns on and looks for the cartridges, reinsert it. Load some paper. Try to print again. If problem continues, it could be a possible hardware problem. Please contact Lexmark technical support for additional assistance.

Apr 05, 2011 | Lexmark X2600 InkJet Printer

1 Answer

Hi, My Lexmark 2350 is not feeding paper through. It pulls on the right hand side but doesn't feed through and then says there's not paper in the tray. Any suggestions? Karla


Try to remove the sheets of paper from the feeder. Grab a flashlight and take a look into the feeder for any foreign objects that might have accidentally fallen into it. If none, unplug and replug your printer into your power source to reset it. If problem continues, please contact Lexmark technical support for additional assistance. Thanks.

Mar 06, 2011 | Lexmark X2350 All-In-One InkJet Printer

1 Answer

Our printer says load MP feeder. We can't get it to print. Please


The front of the printer is a door that opens this is the MP feeder. Load paper in it and the unit should print. Someone likely sent a job requesting that tray.
for more help see.
http://www.lexmark.com/publications/pdfs/t640/eng/ug.pdf
Hope this helps

Mar 23, 2009 | Lexmark T642 Laser Printer

2 Answers

Lexmark T644 MP Feeder STOP ASKING FOR MP FEEDER???!!!


Thanks mate, it worked for me too and my works printers (work in IT and this 'error' was driving us crazy)

Jul 29, 2008 | Lexmark T644 Laser Printer

Not finding what you are looking for?
Lexmark X4650 InkJet Printer Logo

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...