Question about Panasonic KX-T7630 Corded Phone

Open Question

Panasonic cordless phone problem beeps many times and cuts me off!

I have a new panasonic cordless phone. It is connected with the comcast cable system. When talking on the phone the phone has a series of beeps and cuts me off. I have had the cable company come out three times , new lines were run and still the problem happens.i called yesterday and wasy told to diconnect and plug the phone into the regular jack. has anyone else ever complained of this beeping prpblem. I took of call waiting to see if that was the problem. it is very annoying and i have tried to fix it for three months
model number kx-tg1032 with two handsets

Posted by on

  • austin-tx Nov 27, 2008

    same issue with KXTG5633 cordless phone set. Beeping starts somewhat randomly and continues usually for est 8-10 times, sometimes the phone then works ok when it stops, sometimes not. Previous cordless phones have had similar problems. Very annoying.

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 8 Answers

SOURCE: Dropped calls when cordless phone plugged into it.

I have solved this problem several times by using a splitter at the telephone jack instead of the XDP port on the phone. The extension is programmed to share the port isn't it? That is in program 600.

Posted on Sep 16, 2007

Ad

Bird713

  • 1 Answer

SOURCE: Panasonic KX-TG2740 Cordless Phone - Can I reset handset registration

press function button on handset, scroll to initial setting, select by pressing right arrow, scroll to registration, select, select hs registration, follow directions on handset display, pressing mute on "new" base station, and ok on handset(plugged in). If you like, you can unregister with the "old" base unit first.

Posted on Jan 16, 2008

cnavarro

Carl Navarro

  • 2460 Answers

SOURCE: I have a panasonic KX-TG2336S

Just in case you don't have a manual
http://service.us.panasonic.com/OPERMANPDF/KXTG2336.PDF

Page 55 lists your trouble and gets you to page 49. You take the bandset and base, press the locator button on the base and then press the flash/recall button on the handset until Handset Registering appears on the display. If it beeps one time, wait 20 seconds and it should register. If it beeps 3 times, keep trying.

Carl

Posted on Jan 19, 2009

Anonymous

  • 1 Answer

SOURCE: Openning a panasonic cordless phone handset

Carefully slide a thin bladed jewellers screw driver along the side of the case as you go the catches will release, do not force it !!

Good luck

Posted on Mar 05, 2009

njvinod

Vinod Kumar

  • 1462 Answers

SOURCE: I have a panasonic cordless phone, model

Hi,

If you get busy tone in your Panasonic KX-TGA820 cordless phone, it may be due to any one of the following reasons:

1)The called handset is in use.

2)The handset you are calling is too far from the base unit.
Check whether the base unit is not so far from the handset

3)There is no handset registered to the base unit matching the extension number you entered.
Try to re-register the handset to the base unit again, To know details regarding registering and re-registering, please refer page 38 of the manual, which you can download from the link given below

4)Other units are in use and the system is busy. Try again later.
Try to check whether the other units are not using your base unit

You can download manual for your phone from the following link for reference
http://service.us.panasonic.com/OPERMANPDF/KXTG8231.PDF

Please rate this solution
Rnj VINODKUMAR

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn ringer on


Go to Settings > SOUND > Silent mode (No sounds except media and alarms).
If this is ticked (on), it means umts smartphone alarm will sound even if you make the phone silent.
Regarding the loud sound even after reducing ringer volume, no idea for this.

Dec 03, 2011 | Panasonic KX-TG2383 Corded Phone

1 Answer

Dropped calls - Model KX-TGA101S


Try replacing the phone cable, and check that is well plugged into phone rj11 connector.
If it is not the cable call comcast.

Jul 31, 2008 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Hi, I have a Panasonic Cordless phone with 2 bases. I have moved one from upstairs to the phone jacket downstairs. Our third phone worked fine until I switched two of them around. Now only the plugged...


You could plug your non-cordless phone into suspicious phone jack to see if you have dial tone-if you dont have dial tone, the line maynot be connected and you should open the jack to see if there is more than 1 cable attached. If there is more than 1 cable attached and you dont have dial tone at other end of cable the cable might be cut or shorted somewhere inbetween. You can test continuity by tying 2 wires together and test with a multimeter on resistance to see if it is open circuit or maybe even short circuit. To test for short circuit, untie the cables and you should not get a reading. If you do have dial tone when you plug in non-cordless phone the distance might be to far for receiver to pick it up(ie..greater than 10 metres). I hope this has been helpful.

Aug 26, 2011 | Panasonic Lands Phones

1 Answer

When I recieve a phone call through my comcast phone, it disconnects my wireless on my Belkin


I assume you are using a Comcast modem that you plug your phone into.

Does a wired connection to your router work when you get a phone call or just wireless the wireless is cutting out? If both cut out then this problem is on Comcast's side. You can call them using 1-800-COMCAST to have them fix the issue.

If the wired connection works but wireless does not, I would guess you are using a cordless phone that is running on the same frequency your wireless router is. If this is the case, you can change your router's configurations to operate on a different frequency. This can be done by opening up your internet browser and entering the router's configuration menus by using a URL(address) of 192.168.1.1 (possibly 192.168.0.1). Once you are in the configurations, look for options for wireless frequency and change them to something else.

If this does not work, I would suggest calling Comcast because the problem more than likely resides on their end.

Oct 17, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Using home phone causes comcast wireless internet to disconnect


Wireless internet runs at 2.4ghz. Your portable phone is probably also 2.4ghz and is knocking out your internet connection when in use. Look for an 800mhz or 5.8ghz phone as a replacement.

Oct 09, 2009 | Panasonic KX-TG2357 Cordless Phone

1 Answer

Message light keeps blinking


I had this same problem and found this in the manual:

" If the handset still indicates there are
new messages even after you have
listened to new messages, turn it off
by pressing and holding {CLEAR}
until the handset beeps."

It worked!

May 26, 2009 | Panasonic KX-TG1033S Cordless Phone

1 Answer

Panasonic 42" connected to comcast dvr, and dvd player


To solve need more info if this is still a problem.
Is your comcast dvr connected directly to the tv, and also the DVD connected directly to the TV?
If so then you will need to change the input selection on your tv remote to determine which inputs these devices are connected to.
If you are connected differently, please post how your devices are connected.
Dale

May 11, 2009 | Panasonic TH-42PWD7UY 42 in. EDTV-Ready...

1 Answer

Dropped calls, and no dial tone on Panasonic Dect 6.0 phone


I am sure that is a service related issue and no the phone itself.

Apr 26, 2017 | Panasonic KX-TG1033S Cordless Phone

1 Answer

I have a panasonic KX-TG2336S cordless phone and when you try to make a call the handset displays "no link to base". Can this be fixed or is the phone shot?


Just in case you don't have a manual
http://service.us.panasonic.com/OPERMANPDF/KXTG2336.PDF

Page 55 lists your trouble and gets you to page 49. You take the bandset and base, press the locator button on the base and then press the flash/recall button on the handset until Handset Registering appears on the display. If it beeps one time, wait 20 seconds and it should register. If it beeps 3 times, keep trying.

Carl

Jan 18, 2009 | Panasonic KX-TG2336S Cordless Phone

2 Answers

Changing phone channel frequency


Easiest way take off back plate un hook battery wait a couple of minutes hook battery back up phone should find reciever on diff. channel

Aug 30, 2008 | Uniden 5.8GHz Expandable Cordless Phone...

Not finding what you are looking for?
Panasonic KX-T7630 Corded Phone Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

martin hogg

Level 2 Expert

157 Answers

guyvstewart

Level 2 Expert

115 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...