Question about Staples SPLXC200D Shredder
Staple Model SPL-XC200D Paper Shredder, During the hurricane we lost power. When it resumed I could not turn my shredder on. I unplugged it. Waited, plugged in again. Display screen lights up then goes off. Hitting on button doesnot turn unit on. Paper bin properly seated. No paper clogs. Fuse checked and is OK. Tech from Staples says it must be a sensor which they can't supply or fix. Where can I get this part?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Staples SPL-1506X Shredder Issue
I had the same problem. I have a solution but I do not recommend this unless you have technical experience with repairing electrical appliances. I took the back cover of the main shredder unit to expose the wiring (there are 7 screws in total). The bin full sensor has a blue, green, and red connected to it. I clipped the blue wire to defeat the Bin Full error. You can look through the plastic window to check that the bin is full.
Posted on Aug 09, 2008
I found a way to do a fix that should last for awhile. Put the large gear in a vise leaving room to partially knock the small broken gear through. I used a bolt the same size as the hole in the plastic, and tapped it in about 1/4 inch. This pushes some of the small gear through, exposing more of the usable part of it. I then cut (hacksawed) off about 3/8 inch of the broken part, put it back together and it works!..................Good luck, Sparky
Posted on Dec 15, 2008
This exact thing has happened to my unit as well. Ive disassembled it to discover that 5-7 teeth on the gear that the motor drives have been stripped off. Unless the gear can be replaced (which is probably not worth the expense), then the unit is toast. Sorry. Good luck.
Posted on Nov 01, 2009
Just a FYI: I had the same problem. Nothing appeared jammed. But I took the housing cover off and low and behold the rubber roller that turns the shredders had MELTED to the inside. That's why it wouldn't work. This happened while shredding a single DVD - something I had done effortlessly on numerous occasions. You may want to check to see if the roller melted or if some debris has jammed up inside the unit, like mine did often.
Posted on Jan 08, 2010
Tips for a great answer:
Apr 19, 2017 | Staples Office Equipment & Supplies
Dec 08, 2016 | Shredder Office Equipment & Supplies
Oct 22, 2016 | Staples Office Equipment & Supplies
Jun 21, 2015 | Shredder Office Equipment & Supplies
Oct 14, 2013 | Staples Office Equipment & Supplies
Dec 16, 2010 | Office Equipment & Supplies
Sep 10, 2009 | Office Equipment & Supplies
Jun 30, 2009 | Fellowes DM15C Shredder
Apr 23, 2008 | Office Equipment & Supplies
May 25, 2014 | Staples SPLXC200D Shredder
459 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: