Question about Texas Instruments TI-86 Calculator

2 Answers

5(a+3)-a=-(4a-6)+1 - Texas Instruments TI-86 Calculator

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Texas Instru... Expert
  • 267 Answers

For this problem you have to type solve(5(a+3)-a = -(4a-6) +1,a)
See captured image


5(a+3)-a=-(4a-6)+1 - 3_1_2012_9_56_39_pm.jpg

Posted on Mar 01, 2012

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 662 Answers

5(a+3)-a = -(4a-6) +1
5a + 15 -a = -4a +6 +1
(simplify)
4a + 15 = -4a +7
(add 4a to each side of equation)
8a + 15 = 7
8a = 7-15
8a = -8
a = -8/8
a = -1

Posted on Oct 18, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Quadratic functions


Substitute 2 for x, 3 for f(2). This gives you an equation with a as an unknown
3=a*(2^2)-6(2)-7
3=4a-12-7
4a=3+12+7=22 or a=22/4=11/2
Check
11/2*4-12-7=3 Checks OK

Oct 20, 2013 | Office Equipment & Supplies

3 Answers

US-4A Keyspan USB Server


if urs is a 3 in one u wil have scan and copy functions also included in this sir.

is urs a 3 in one?

Jun 21, 2008 | Keyspan USB Server US-4A (d47710) Print...

1 Answer

Does any one know how many valves a 1986-1987 toyota carolla 1.6 has, I think it is 12 or 8


Hi there:
Keep in mind this information:

Japanese market engines:
* 3A-U 1.5 L (1490 cc) I4, 8-valve SOHC, carb, 83 hp (62 kW)
* 3A-LU 1.5 L (1490 cc) I4, 8-valve SOHC, carb, transverse mount, 83 hp (62 kW)
* 4A-GEU 1.6 L I4, 16-valve DOHC, EFI, 130 hp (97 kW)
* 2E 1.3 liter
* 5A-F 1.5 liter
* 5A-FHE 1.5 liter
* 4A-FE 1.6 liter
* 4A-GE 1.6 liter
* 4A-GZE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, wide valve angle, supercharger, 165 hp (121 kW) GT-Z
* 2E 1.3 L (1295 cc) I4 cylinder 12v SOHC 73 PS (54 kW; 72 hp)
* 4E-FE 1.3 L (1331 cc) I4 cylinder 16v DOHC 100 PS (74 kW; 99 hp)
* 5E-FE 1.5 L (1497 cc) I4 cylinder 16v DOHC 105 PS (77 kW; 104 hp)
* 5A-FE 1.5 L (1498 cc) I4 cylinder 16v DOHC 105 PS (77 kW; 104 hp)
* 4A-FE 1.6 L (1587 cc) I4 cylinder 16v DOHC 115 PS (85 kW; 113 hp)
* 4A-GE 1.6 L (1587 cc) I4 cylinder 20v DOHC VVT 160 PS (118 kW; 158 hp)
* 4A-GZE 1.6 L (1587 cc) I4 cylinder 16v DOHC supercharged 170 PS (125 kW; 168 hp)

North American market engines:
* 4A-C 1.6 L I4, 8-valve SOHC, carb, 90 hp (67 kW)
* 4A-GE 1.6 L I4, 16-valve DOHC, EFI, 112 hp (86 kW)
* 4A-F 1.6 L (1587 cc) I4, 16-valve DOHC, carb, narrow valve angle, 95 hp (71 kW)
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 102 hp (76 kW)
* 4A-GE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, wide valve angle, 115 hp (86 kW) 1988/89, 135 hp (100 kW) 1990/91 GT-S
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 105 hp (78 kW) 93-94 SD
* 4A-FE 1.6 L (1587 cc) I4, 16-valve DOHC, FI, narrow valve angle, 100 hp (75 kW) 95-97 SD
* 7A-FE 1.8 L (1762 cc) I4, 16-valve DOHC, FI, narrow valve angle, 115 hp (86 kW) 93-94 DX and LE
* 7A-FE 1.8 L (1762 cc) I4, 16-valve DOHC, FI, narrow valve angle, 105 hp (78 kW) 95-97 DX, and LE





Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 18, 2012 | Toyota Corolla Cars & Trucks

1 Answer

Replacing oil pan in 1990 Toyota Corolla


Vehicles covered: Toyota Corolla, 4A-F, 4A-FE, and 4A-GE Engines

Here's your maintenance manual entry for the complete procedure:

OIL PAN REMOVAL & INSTALLATION - 1990 Toyota Corolla

4A-F, 4A-FE and 4A-GE Engines

See Figures 1 through 7

1. Disconnect the negative battery cable.

2. Raise and safely support the vehicle.


2_19_2012_5_49_50_am.jpg


Fig. 1: Exploded view of the oil pan assembly-4A-F and 4A-GE engines

3. Drain the engine oil into a suitable container.


2_19_2012_5_50_48_am.jpg


Fig. 2: Remove the oil pan drain plug to drain the engine oil from the crankcase

4. Place a jack under the transaxle to support it.

5. Remove the splash shield from under the engine.

6. Raise the jack under the transaxle slightly.

7. Remove the front exhaust pipe between the exhaust manifold and catalytic converter. Some models have an oxygen sensor, disconnect the oxygen sensor wiring.


2_19_2012_5_52_25_am.jpg


Fig. 3: Remove the front exhaust pipe for better access during oil pan removal

8. On the 4A-F and 4A-FE engines, remove the center mounting.



2_19_2012_5_53_31_am.jpg


Fig. 4: Remove the bolts and nuts retaining the center mounting-4A-F engine

9. Some 4A-FE engines and all 4A-GE engines are equipped with a stiffener plate. Remove the set bolts and pull the stiffener plate from the vehicle.

10. On the 4A-GE engines, unbolt and lower the flywheel housing under cover.

11. If equipped, remove the oil cooler hose and union from the oil pan. Remove the two nuts and nineteen bolts retaining the oil pan.

12. Insert a blade between the pan and cylinder block, cut off the applied sealer and remove the pan.




2_19_2012_5_54_52_am.jpg


Fig. 5: Insert a blade and tap lightly to loosen the oil pan free from the block

To install:

Note: Be careful not to drop any oil on the contact surfaces of the pan and block.

13. Using a razor blade and gasket scraper, remove all traces of packing (FIPG) material from the gasket surfaces. Thoroughly clean all main surfaces to remove loose material. Clean both sealing surfaces with non-residue solvent.


2_19_2012_5_58_22_am.jpg


Fig. 6: Apply a reasonable amount of sealant (FIPG) to the oil pan surface-except 7A-FE engine

14. Apply new packing (FIPG) 08826-00080 to the oil pan as shown. Avoid applying excessive amounts to the surface. Be especially careful around the oil passages.

Note: Parts must be assembled within 3 mins of application. Otherwise, the sealer (FIPG) must be removed and reapplied.

15. Install the oil pan over the studs on the block with the nineteen bolts and two nuts. Tighten the bolts to 43 inch lbs. (5 Nm). Make sure when you install the oil pan drain plug using a new gasket.



2_19_2012_5_59_41_am.jpg


Fig. 7: Tighten the 19 oil pan retaining bolts securely-4A-F, 4A-FE and 4A-GE engines

16. If equipped, install the oil cooler pipe, two new gaskets and union bolt. Tighten the union bolt to 18 ft. lbs. (25 Nm).

17. Install the front exhaust pipe (with new gaskets on either end of the pipe) to the manifold.

18. On the 4A-GE engines, install and secure the flywheel housing under cover if removed.

19. On the 4A-FE engines if removed, attach the stiffener plate. tighten the No. 1 bolt first then the 5 bolts in the sequence shown. Tighten to 17 ft. lbs. (23 Nm).

20. On the 4A-GE engines, attach the stiffener plate with the 3 set bolts and tighten them to 27 ft. lbs. (37 Nm).

21. Attach the center mounting and tighten the member side bolts to 38 ft. lbs. (52 Nm), plate side to 17 ft. lbs. (23 Nm).

22. Lower the jack from the transaxle.

23. Lower the vehicle, and fill the crankcase with the appropriate amount of engine oil. Engine oil crankcase capacity is 3.4 quarts (with oil filter change).
Above -9 degrees Fahrenheit, use 10W-40 motor oil, and above 10 degrees Fahrenheit, use 20W-50 motor oil.

24. Connect the negative battery cable, start the engine and check for leaks. If all is well, raise the vehicle slightly and install the engine splash cover.

25. Recheck the engine oil level, top off if necessary.

Feb 14, 2012 | 1990 Toyota Corolla

1 Answer

I have a dell optiplex gx520,it is hooked up to wireless connection and it's showing that the signal is good,but IE won't let us view webpage......


can you check if have a valild IP address?

1. Start > RUN > type in "cmd"
2. On the command prompt windows (black DOS window),
> type "ipconfig" > hit Enter
> you should have a valid IP address (something like 192.168.x.x)
• if yes, then try to ping a website
• if no, (you should see somthing like 169.254.x.x), check your wireless settings again.
**good signal doesnt mean that you are connected, it could be a conflict with wireless encryptions too..**
3. to perform PING
> on the CMD screen (back DOS based window), type "ping (space) google.com"
> you should see ping statistics, something like "packets sent=4 received=4 lost=0"
• if 0% lost > your connected to the internet
• if 100% lost > you have no connection
> again check your wireless again
4. If you can Ping and you can't still view webpages using IE here's what I suggest
• Optimize your browser
-delete temporary internet files and cookies
4a.1 Open Internet Explorer
4a.2 Click "Tools" (the icon that looks ike a cogwheel / gear; usually at the upper right corner of internet explorer)
4a.3 Click "Internet Options"
4a.3 Click "Delete" under the General Tab Screen
4a.4 Restart Internet Explorer
• Reset Internet Explorer to factory settings
4b.1 Open Internet Explorer
4b.2 Click "Tools" (the icon that looks ike a cogwheel / gear; usually at the upper right corner of internet explorer)
4b.3 Click "Internet Options"
4b.4 Click on the "Advanced" tab
4b.5 Click on "RESET"
4b.6 Restart Internet Explorer

Hopes this Helps

Aug 09, 2011 | Computers & Internet

1 Answer

A+1/4a


a+1/4a = 4/4a+1/4a = 5/4a

Jan 16, 2011 | Mathsoft StudyWorks! Mathematics Deluxe...

1 Answer

What two numbers have a product of 96 and a quotient of 6?


1) a * b = 96
2) a/b = 6

Isolating a and Using substitution:
a = 6*b;

6*b*b = 96
b =4

plugging back into equation 1:

4a = 96
a = 24

The two numbers are 4, 24.

Dec 10, 2010 | Computers & Internet

4 Answers

Just simplify this rational algebraic expression 16a^2-8a 1/4a-1


16a power of 2, -8a,),,(1/4a-1) are these two prolems polynomials, to be multiplied togethor? is 4a to the third power-18a squared+8a, used the distributive property
Michael

Oct 04, 2010 | Mathsoft StudyWorks! Mathematics Deluxe...

1 Answer

What would the torque setting for a 86 corolla head bolts and cam bolts thank you Jason


4a-c and 4a-ge is 108lbs. for camshaft bearing caps bolts. cylinder head bolts:4a-c =43 4a-ge =44.

Apr 06, 2010 | 1986 Toyota Corolla 2 Door

1 Answer

Need torque settings for 1985 4A corolla cylinder head


hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:

9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Jan 14, 2009 | 1985 Toyota Corolla 2 Door

Not finding what you are looking for?
Texas Instruments TI-86 Calculator Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

Ekse

Level 3 Expert

13434 Answers

Gene Pitts

Level 2 Expert

159 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...