Question about Euro-Pro Shark 9110 Sewing Machine

1 Answer

Where to get sewing machine parts. I need a new auto needle threader. I bent the one on my Shark 9110.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Euro-Pro Master
  • 1,134 Answers

Any chance that it looks like this one?
where to get sewing machine parts.  I need a new - 11_9_2011_3_57_59_am.jpg
www.sewingpartsonline.com have this part but list it for the Euro Pro Shark 9015

However, you could email them and double check its suitability for your model.



http://www.sewingpartsonline.com/needle-threader-simplicity-singer-white-270030002.aspx

Posted on Nov 09, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Needle threader won't work on my Singer 4423


Hi there,

The needle threader hook is very tiny and easily bent or damaged.
The needle threader is designed not to turn, if the needle is not at its most upper position to protect the threader - Turn hand wheel until needle reaches its highest position.
Needle not alining with threader hook - Replace needle.
Threader hook bent - Replace with new needle threader hook.

Hope this helps.

Read more from the link I attatched.

Good luck & have a nice day!

Automatic needle threader will not work

Jul 14, 2017 | Singer Sewing Machines

1 Answer

Auto needle threader


I have had problems with this too. But you can get them from Euro Pro about $10.00

Dec 14, 2013 | Euro-Pro Shark 9110 Sewing Machine

1 Answer

I need to purchase a needle plate (?) the silver plate covering the bobbin for my Euro-Pro 9110.


try these sites for parts

mastersewusa.com
sew4less.com
sewingmachinestitch.com
sewingcenter.us

Dec 27, 2010 | Euro-Pro Shark 9110 Sewing Machine

2 Answers

The automatic threader does not work


Please refer to page 33 of the user's manual.

The needle has to be in the highest position for the needle threader to align with the eye of the needle.

Threaders will not work if the eye of the needle is too small for the wire on the threader.

Sometimes the wire gets bent if it was forced against a needle that was too small or if the needle was not in the correct position for the threader to work.

The wire can be bent back into place, but you have to be careful as it is very thin and can break.

If the wire is broken, the dealer can order a new threader - they are not very expensive and are easy to install.

Feb 19, 2010 | Brother XR-65t Mechanical Sewing Machine

2 Answers

Singer Athena automatic needle threader does not work.


Check on the threader and see if the part that goes through the eye of the needle is bent. This is a very common problem. The threaders are becoming more and more difficult to replace. If the piece is bent, you can usually use a pair of tweezers to straighten it out.

Feb 07, 2009 | Singer 132QRFB Mechanical Sewing Machine

2 Answers

Auto threader


The parts for any autothreader are necessarily delcate considering the nature of its task. Check (without thread) to make sure the tongue that passes through the eye of the needle isn't bent a tiny bit causing it to strike next to the ****. Have seen this more than once. 

Sep 07, 2008 | Brother NX-400

1 Answer

Singer 2932 automatic threader


A new part is faster and easier but sometimes the problem is a bent hook( the tiny part which goes through the eye of the needle). Remove the needle to see the part better and pull the threader down. Look in the very center of the threader for the hook. It is probably pushed to the right.Using a small screwdriver or other thin piece of metal, force the hook back to the center. Try it and continue until it enters the eye again. By the way, a Singer dealer can get this part for you for under $10.
sewman7

Aug 09, 2008 | Singer Sewing Machines

1 Answer

Automatic Threading


The tiny hook which goes through the eye of the needle is bent, broken or misaligned. Use a magnifying glass to watch the hook as you try the threader. Sometimes it may pass to the side of the needle and will need to be moved by loosening a screw and adjusting the assembly from side to side. Some machines don't have a screw to move. In this case you need to use a small screw driver to flex the hook to the correct position. Or you can buy a new part from your dealer for about $5.

sewman7

Jun 11, 2008 | Euro-Pro Shark 80 - 7133

2 Answers

I can't thread the Shark Euro0pro 384 unng the automatic threader


You need to check to see that there is a small hook going through the eye of the needle when you use the threader. A flashlight or bright light will help. So will a magnifying glass. If it isn't, then no amount of trying will help.
If it goes through the eye, you need to see that your thread hooks into it so that the thread can be pulled through.
sewman7

Jun 08, 2008 | Euro-Pro Shark 60 - 384

Not finding what you are looking for?
Euro-Pro Shark 9110 Sewing Machine Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...