Question about Hotpoint WMA76 Front Load Washer
Just lately this washing machine's spin cycle has become so noisy that you can't stay in the kitchen whilst it is spinning. Someone said it might the bearings need replaced?
If the machine is only noisy during the spin cycle then it is probably not the bearings, more likely it is probably the same issue I had. There is a large weight attached to the top of the drum, in my case it was loose. A simple fix, remove the lid and tighten the three bolts. The lid is removed using a T20 star key, you can buy these at places like Homebase or B&Q (about £7.50 for a set of 10 different sizes). There are two little plastic lugs on the side of the lid, the screws are behind these, remove them and then pull the lid forward and up. The weight is obvious, it looks like an odd shaped brick and is bolted down with three bolts. In my case the front one was loose.
Posted on Nov 14, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 09, 2014 | Hotpoint WMA76 Front Load Washer
Dec 29, 2010 | Hotpoint WMA76 Front Load Washer
May 26, 2010 | Hotpoint WMA76 Front Load Washer
Nov 10, 2009 | Washing Machines
Jan 23, 2009 | Hotpoint WMA76 Front Load Washer
Dec 29, 2008 | Hotpoint BWM12 Front Load Washer
463 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: