Question about Timex Ironman Watches

Open Question

Manual for a timex ironman triathlon fitness monitor

Back has 818 H3

Posted by Anonymous on


5 Suggested Answers


  • 1 Answer

SOURCE: I have a Timex Ironman Triathlon Speed + Distance...

While following DaveN4EF's excellent directions, I got stuck with the reset. What ever I did, it would not reset.... I took the battery out, put it in again and it worked like new.

Thanks, Dave for the great directions

Posted on Apr 08, 2008


Arturs Kalnins

  • 2338 Answers

SOURCE: timex ironman triathlon - need directions to adjust time for day

Follow this link and download usars manual for your watch:

Use ZOOM tool as the writings are tiny.

Do not forget to rate, please.

Posted on Mar 09, 2009



  • 2071 Answers

SOURCE: how do you set Timex Triathlon Ironman watch?

First look for the set button then press it ,a long press and If it is blinking that's the time you to select the hour ,the minutes,the day/date,the alarms and the special features of your watch.The right button the up and down or for scrolling.Try all of this so your time will set.

Hope it may help you;


Posted on Jun 08, 2009



  • 6 Answers

SOURCE: I need a manual for a Timex Ironman Triathlon

Visit this site:

There are two ways to find the user manual for your Timex watch.

  1. Find your watch on the list on this page and click on the language link for your manual.

  2. Locate the the 3-digit module number located on the caseback of most Timex products and click on the corresponding language link for that number in the table
If you are still unable to locate your user manual, you may email Timex Customer Service at or call them toll-free at 1-800-448-4639.

Posted on May 28, 2010

David Tolond

  • 2501 Answers

SOURCE: i m looking for a manual for timex ironman M586. I

You can get instructions from the Timex web site "".

At the bottom of the screen click on "manuals/downloads", then on "product
manual download"

Enter your watch type in the search box and click on "search"

Posted on Jun 04, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to fix night light for Coleman watch 40-818

You will need a jeweler to do this.

Jun 29, 2017 | Watches

2 Answers

How to change battery on H3 Tactical HTTH3.15111 watch

  • Remove back
  • Find battery holder
  • Identify type
  • Obtain replacement
  • Remove old battery; install new
  • Check operation
  • Reinstall back
  • Set time, etc.

Take your watch to a jeweler who, for a reasonable sum, will replace the battery.

Nov 21, 2016 | Watches

1 Answer

I need an Ann Klein watchband replacement - model 10/9168 (has gold hardware in the band). Where can I go for this replacement?

You can just call 818-2496007 (in LA) and order any anne klein parts you need. For 10/9168 watchband, its price is about 22$.

Oct 19, 2012 | Anne Klein 10 6419SVTT 106419SVTT Watch

1 Answer

Guess watch how to take back off to change battery

You must first determine if the watch has a screw down back or snap off back.The top picture is a scre down back and the bottom is a snap off. If it is a screw down back you will need a watch case back opener to open. If is is a snap off you need to look around the back and find the little notch. you can then take something like a butter knife insert the edge between the case back and the case and snap the back off.

Apr 02, 2012 | Seiko Watches

1 Answer

Date does not set will rotate to next day before it should?

I am not quite sure of your problem but mechanical watches can be 12 hours out and still give the correct time but when it is indicating (say) 9 o'clock, it means 9 a.m. when it is 9 p.m.
If this is the problem you have, then wind the watch forward 12 hours and it will change overnight instead of at noon.
I hope this helps.

Aug 21, 2011 | H3 Tactical H3.15222 Blue Shadow 1 Watch...

1 Answer

How do i open the back of the watch to change the battey?

There are typically 2 ways to open the back of a watch. Some watches have a snap off cover, other are screwed on.
Snap On Somewhere around the perimeter of the back of the watch you will see a small crescent. This is the place where a small screwdriver can be inserted and twisted to remove the back.
To replace the back, simply position it evenly on the back of the watch and press.
Screw On Removing a screw on back is slightly more difficult. For these backs, there are typically a series of slots around the perimeter of the back of the watch. The best way to loosen the back is with a pair of needle nose pliers. Place the 2 tips of the pliers in slots on opposite sides of the back of the watch. Apply light but constant pressure and turn the back counter clockwise.
To replace the back, carefully replace the back with your fingers. Be sure the back is set correctly in the threads by turning the back slightly counter clockwise. When you feel the threads click into place, simply turn the back clockwise with your fingers to tighten. Once finger tight, once again use the needle nose pliers to tighten the back.

Mar 01, 2011 | Watches

1 Answer

How to open the back


Determine the type of case back on the watch. Set the watch face down on a soft surface and look at the back. If it has slots, it is defined as a screw-back case. If it is smooth, it is defined as a snap-back case.

To open a screw-back watch, use the metal blade of a standard screwdriver to turn the slots counterclockwise. A case-back wrench, which can be purchased at watch-repair stores, can also be used. Set the metal tips of the wrench into the back's slots and turn it counterclockwise to open.

For a snap back case, place the metal blade of a standard screwdriver in the indent between the watch and the case. Gently apply pressure to lift the case up and off of the watch.

Close the case back by setting it back onto the watch. For snap-back cases, line up the indent on the side of the watch and press gently on the case back to close. For screw-back cases, use the screwdriver blade or case-back wrench to turn the slots clockwise, thereby closing the case shut.

Feb 06, 2011 | Bulova Watch

1 Answer

My watch has lost the tritium plug at zero on the bezel. how can i get a replacement? thank you

This is a dialog I had with a dealer:
Ann: How can I help?

you: I was wondering where would one go for watch parts for the sw tritium watches?
Ann: Smith & Wesson watches, Correct
you: yes
Ann: Here is the contact information for them
Ann: 4625 W. JEFFERSON Blvd.
Ann: LOS ANGELES, CA 90016
Ann: 888.922.6726
you: thank you

good luck and don't forget to vote!!!

Sep 28, 2010 | Smith & Wesson H3 Tritium Watch Yellow

2 Answers

Smith and Wesson H3

Look at the back of the movement, as you pull out the knob ( the crown) you should see either to the left of the crown (in the movement) or one the outside of the movement (a little lower) you should see a piece of metal that moves every time you pull in and out. It also should have a little dimple on it ( it is called the detent). Take a pin(or something that small) and as you pull out the crown GENTLY push in on it, this should release the stem and crown. Then you should be able to take out the movement and fix the hands. When you are done GENTLY push the stem and crown back into the movement. If you find you have any problems PLEASE let me know, I will be glad to go over it with you as you do it. Good Luck!!!

Aug 09, 2008 | Smith & Wesson H3 Tritium Watch Blue

Not finding what you are looking for?
Watches Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers


Level 3 Expert

34569 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides