Question about Bertazzoni Kitchen Ranges

1 Answer

Bertazzoni gas range - the broiler won't stay ignited

The broiler ignites when I depress the knob, but won't stay on when I release it. Range is about two years old; this just started happening.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

In my case, the igniting wire was too close to another piece of metal. It was igniting upstream from the burner. All I did was push up on the wire, and the broiler started working again!

Posted on Dec 19, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
catriver

Ron Marek

  • 878 Answers

SOURCE: Oven/Broiler Igniters for KitchenAid range KGST307

Guy, your missing some letters at the end of the model but I compared 4 different gas slide in's starting with KGST307 and the part numbers are bake ignitor 9751123 and broil 9751784. Catriver..post back

Posted on Apr 02, 2007

james klgr

james kilgore

  • 362 Answers

SOURCE: Kenmore Gas Range - burners won't ignite

its possible your gas regulator is bad or the gas line to the ignitor is stopped up look at the line and see if some type of food has blocked the outlet

Posted on Dec 08, 2007

bestdarngood

Benjamin Patri

  • 3037 Answers

SOURCE: Oven does not heat but broiler does

The most common cause of this symptom is a defective ignitor. Oven ignitors can glow and allow enough current through to open the oven gas valve but just not produce enough heat to ignite the gas immediately (see the link below).


In that case, replacing the oven ignitor is the usual solution.


http://www.appliance411.com/links/jump.cgi?ID=823

Posted on Mar 22, 2008

Anonymous

  • 4 Answers

SOURCE: range igniter will not stop ticking after flame starts

I have a similar problem.
Look at this post
http://appliancejunk.com/forums/index.php?topic=4812.0
Good luck
if you find out what wrong with yours, pls email me at terry.robb@hotmail.com
Thanks

Posted on Sep 06, 2009

marka19

marka19

  • 1430 Answers

SOURCE: My GE Profile gas oven will not ignite. The

The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to partially open or not open at all. The igniters are inexpensive and easy to replace. There is a video at www.appliancehelponline.com/servicemanual.html this will walk you thru the correct procedure for performing this test. It may be a different model but the testing will be the same.You can also enter your model # for diagrams and illustrations of your specific model. Not all models are available. All parts come with installation instructions.

Posted on May 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pilot light blew out by a fan..I turned the control off..How do I Ignite Please


First locate where to light pilot. You can do this by following thin aluminum colored tubing from control valve to inside heater.In general on top of your gas control valve is a knob. Turn indicator of this knob to pilot and depress knob. This will start gas flow to pilot at end of thin tube. Hold this knob in the depressed position and light pilot. DO NOT release knob for 30 -45 seconds. Then release knob and pilot will remain lit. Then turn knob to on position. If pilot will not stay lit you may need a new thermo coupler, which senses heat from flame to keep pilot gas flow open.
Good luck

Mar 10, 2015 | Heating & Cooling

1 Answer

Avanti G2002CW oven or broiler won't stay lit once ignited


I had this same issue on this same model (which is how I happened upon this page). I'm still not exactly sure why, but the problem resolved when I pushed down on the knob more firmly than I normally would to light the stove, and it seemed to slide in a little deeper. After that, the oven would light.

Jul 07, 2013 | Avanti Kitchen Ranges

1 Answer

I have a GE JGBP24GEN6 oven (17 years old). Both the broiler and oven ignition quit at the exact same time, so I'm concluding it's not the igniters. All the top burners work. If you turn on...


there are 3 possibilities

1) the clock has accidenlty been set to the self clean mode(regardless if it still keeps times or no longer runs as several 17yo analog style clocks have quit keeping time) to check if that is the case rotate the knobs that say start and stop till both knobs pop out then push in only the knob for the start till it locks in and check if the oven works(the normal position for itis to be locked in so leave it there)

2) the circuit that is common to both bake/broil on the selector switch has burnt out,on the selector their is a circuit for just the bake,a circuit for just the broil& a circuit that is common to both.IF that turns out to be the case,according to the website i use to look up part#'s the selector is no longer available(oh and thanks for including the model# in your question is it so rare and i thank you for actually including it)

3) the circuit on the thermostat is burnt out(unlike the selector their is only one circuit) per the parts lookup site that part is still available

Hope this helps
Good luck ,Gene

Jul 23, 2011 | GE JGBP24 Gas Kitchen Range

1 Answer

The burners light, but it takes an inordinate time for them to stay lit. One of the burners will not stay lit when the knob is released, regardless of how long you depress the knob.


Need a new fsd ( looks like a small brass pencil) for the burner that won't light. The alignment of the ignition electrodes needs looking at and there over all condition I. E broken , worn , misaligned ect

Jul 13, 2011 | Bosch PGL985UC 36 in. Gas Cooktop

1 Answer

I have a stainless steel Ducane BBQ with five burners plus side burner and a rottisserie burner , which does not work. It is approx 5 years old and I have never used the rottisserie till last week. I have...


Since you've never used it. It may simply be a case that the infrared rotisserie burner is dirty and clogged with grease from cooking on the main burners. In addition, the Thermocouple and the igniter for that burner may also have a grease build up. In which case it won't allow the burner to light.

The electronic igniter that lights the main burners, also ignites the the rotisserie burner. Are you geting the click noise on the main burner igniters? If not, the battery in the igniter button needs to be replaced. Be sure to take note of the way the old battery is facing, when you unscrew the igniter cap. Because, that's the way the new battery should face.

Also, try match lighting the rotisserie burner. To do this, turn the Rotisserie Burner's Control Knob to the ON position and push it in, as you touch the lit match to the burner. If the burner lights continue to hold the burner knob in for a couple of minutes. This allows the Thermocouple and the ceramic plaques to heat up completely. Then slowly release the burner knob and the burner should remain lit.

If it doesn't stay lit, clean the burner and the Thermocouple ,in the manner that is described in your Owner's Manual.

Hope this helps you troubleshoot and solve the problem. Please let me know and Happy Grilling!!

Jun 15, 2011 | Ducane 30400040 Stainless Steel Grill

1 Answer

Gas range won't ignite. We had PGE and come over


This sounds like a failed burner igniter, also called a spark module. These are pretty easy to replace since the module itself is located at the back of the stove under an access panel. The price is around 40 to 60 dollars. Lately it seems that these newer stoves have weaker spark modules. I see dead modules on models less than 2 years old, where it used to be more like 5 or more years on the older ones.

Mar 24, 2010 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

Why does the surface burners and broiler light but not the oven burner on my Kenmore gas range? Kenmore gas range around 14 years old the model number is 362.7352192. We were using the oven and in the...


The oven gas valve coil has failed Need to replace. Go to repairclinic.com and put in the model and order the coil for the valve. It controls the gas valve.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Sep 11, 2009 | Kitchen Ranges

1 Answer

The oven doesn't work ,the ignator doesn't light up. no gas coming


The technical jargon is,.....:
In order for your gas oven to work this is what has to happen: 1. when you turn on the oven, the range sends 120 volts to the glow bar igniter. 2. as the igniter heats up (and starts to glow) it starts using more electricity. 3. when the electric use reaches a set amount (say 3.2 amps) the range knows the glow bar igniter is hot enough to ignite the gas, so it then releases gas through the gas safety valve. 4. when the thermostat tells the oven controller that the temperature has been reached, the control cuts power to the igniter, cutting the amp draw down, causing the safety gas valve to close. 5. process repeats to hold oven temp until you turn off oven.

So,..........the solution is:
most likely your oven igniter burnt out. Find your model number, usually on the range frame just behind the lower drawer or broiler drawer (depending on if it is a self clean gas range or not) and order the correct igniter and replace it.

Nov 02, 2008 | Kitchen Ranges

1 Answer

Gas ove will not stay lighting


Hi there you need to change the ffd on your oven FFd stands for flame faliure device. its like an temperature controlled switch. it is located in the oven and this device is what lets the gas go through once it has reached a certain temp. It must only be done by a corgi qualified engineer and to be honest your loooking at about 100 pounds.

Oct 08, 2006 | Baumatic B604SS Stainless Steel Gas Single...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

1,311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bertazzoni Kitchen Ranges Experts

Dan Connors
Dan Connors

Level 2 Expert

119 Answers

Racki123

Level 1 Expert

33 Answers

Todd B

Level 3 Expert

572 Answers

Are you a Bertazzoni Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...