Question about Toshiba Televison & Video
TV has only 1 scart port, what cables do I need to connect the Alba DVD player to the TV please?
If the TV has the red, white and yellow sockets on it you can use an adapter. It's a scart plug on one end (for the DVD player) and 3 little round sockets on the other, usually red, white and yellow, sometimes red, black and yellow, like this:Amazon.
Then you need an audio/video lead with red, white and yellow plugs on both ends like this:Amazon
Or one of these:Amazon
You could also use a multi socket scart adapter to add more scarts to your TV:Amazon
Posted on Jan 23, 2012
Testimonial: "Got some of these cables, need the adaptor... brilliant info Thanks a million....."
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: audio via hdmi
I had the same problem with the same configuration. In addition to the HDMI which is (DVD and Audio OUT only by the way) you need to connect the TV to the DVD through a high quality SCART cable as well. Remember to connect the SCART cable only while both the TV and DVD are switched off. To get the TV sound out of the DVD surround sound you need to click the FUNCTION key on the DZ230 remote a couple of times till you get the word TV on its screen, this is when you should hear the TV sound coming out of your surround sound as expected. Good luck.
Posted on Aug 25, 2007
Yes, there are devices to help you. You should shop for an “RF Modulator.” While the intention of this box is convert an A/V signal to RF for older televisions, many modulators offer multiple inputs which can be chosen with a switch. Be sure to check both the input and output options on the box that you buy to ensure it will be compatible with your components and television.
Go Ahead. Use Us.
Posted on Jun 30, 2008
It has to do with the type of input - Video2 and 3 are Component video inputs, requiring a 3- wire component video cable (Red,blue,green for video, red/white below for audio). Video 1 is for analog equipment (Yellow for the video, red and white for the audio). Unless your Wii comes with a component video out cable and jacks (same red blue green), you'll have to use video 1 for the Wii, and use Video 2 for the dvd. You'll need a component video (3-wire) cable for your dvd, which should have the jacks for it. You can use the present cable you're using for the dvd, but you'll have to change the connections on the back of the dvd to component video out, and you'll still need another 2-wire cable to connect the audio out on the dvd to the audio in on Video 2 on the tv.
Here's the manual for your tv - look on page 8 for these connections. the Wii will be an analog connnection, the dvd will be a digital connection.
Hope this helps!
Posted on Mar 13, 2009
Something is wrong whith the HDMI jack it's self, or the electronic switching is not sensing a signal is present. In either case the board that has the HDMI jack you are using needs to be replaced. Most all these boards are double printed, Multi-layered or both which prevents replacing the jack it's self. I do have a question though, do you only have on HDMI jack on the unit or do you have another one available.
Posted on Jun 18, 2009
Tips for a great answer:
Dec 14, 2014 | Alba DVD-108 DVD Player
May 08, 2013 | Toshiba SD7300 DVD Player
Apr 02, 2011 | Televison & Video
Jan 01, 2011 | Televison & Video
Dec 26, 2010 | Toshiba Televison & Video
Nov 12, 2010 | Toshiba SD-V394 DVD Player/VCR
Dec 28, 2009 | Proscan PS8682P
Oct 14, 2009 | Televison & Video
Oct 10, 2009 | Televison & Video
221 people viewed this question
Usually answered in minutes!