Question about Frigidaire 30 in. Electric Gallery Series Self-Cleaning Double Wall Oven

1 Answer

My frigerdaire oven heats for a while about 15-30 minutes then shuts down with a beeping noise and a f3 code.

It will not come right up I have to wait about 5 minutes before I can continue to cook my food in the oven.

Posted by Anonymous on

Ad

1 Answer

  • Official Brand Answer
  • 2,267 Answers

Good Afternoon Friend,

I see that your Frigidaire double oven heats up for about 15-30 minutes, then shuts down and begins beeping while showing an F3error code. The F3 states that the oven is sensing a potential runaway temperature. This is possibly a sensor issue or it could be a false error code.

I suggest giving your double oven a hard reset by cutting the power at the circuit breaker for at least 2-3 minutes.

After restoring power you will need to reset the clock. You will do this by entering in the time and pressing start.

Let the oven heat up, and if you are still receiving an F3 error code, I suggest either contacting the manufacturer or contacting your local authorized technician to diagnose your appliance. Hope this helps.

-Best Regards-
WP

Posted on Apr 08, 2014

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jumptrout51

steve

  • 3361 Answers

SOURCE: F1 error code plus constantly beeps and Oven won't shut off

ERC is bad and must be replaced.
(The Clock).

Posted on Apr 11, 2009

Anonymous

  • 373 Answers

SOURCE: f2 f3 starts beeping when using stove or oven

F2
Oven temperature too hot
Check and replace oven temperature sensor (RTD).
F3
Open oven temperature sensor (RTD)
Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
So i suppose its a sensor replacement is necessary.These are the fault code explanations by frigidaire.good luck with the machine.Please do post results and comments.

Posted on Apr 15, 2009

jumptrout51

steve

  • 3361 Answers

SOURCE: f2 f3 startss beeping when using stove or oven

Replace the oven temperature sensor.

Posted on Apr 15, 2009

jumptrout51

steve

  • 3361 Answers

SOURCE: display reads " -F3-

Replace the oven temperature sensor. Unplug the range. Open the oven. The temp sensor will be in the top right or left of the oven.A short metal piece about half the size of a pencil. Remove the screws,pull it out carefully. Disconnect the wire plug. Reverse this order to install the new sensor.

Posted on Sep 14, 2009

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: F8 CODE IS FLASHING, OVEN BEEPING AND TOP OVEN DOOR IS LOCKED

Hi,
Seems like you found out the hard way what I wrote about in this tip...
Check it out it also contains some thing to try on how to unlock that oven..

Self Cleaning Oven Problem
https://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101
Asker's Testimonial " Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! " - amymrocks

Posted on Jul 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The heating element becomes red hot,but the food doesn't appear to cook in an appropriate time os fashion. Any answers or suggestions


The top of whatever food you're cooking should be in the center of the oven for the most effective cooking. Do you have the oven set on bake or broil? Broil is a direct heat method and if the food is on the lower shelf and the oven is set on broil, the food is not getting enough heat to cook it properly. Baking heats the lower element and the heat rises to surround the food. Broiling heats the top element and since heat rises, it is not getting down to the food to surround it and cook it.

Nov 04, 2010 | Hotpoint SY36 Style Line Stainless Steel...

1 Answer

Smeg electric oven timer controls


Hello,

first is unplug the the oven from the wall outlet, to hard reset the setting. wait for almost 20 minutes then plug it again.

please tell me if there is still problem after this, melnavz

Apr 10, 2008 | Smeg SE280X Stainless Steel Electric...

1 Answer

Resetting the clock


Hello,

You can set the timer on a single oven slow cooker to automatically switch to a warming setting when you estimate foods will finish cooking.The programmable features allow you to leave food stewing at home while you are out of the house, freeing up your day. Set the timer on a Corningware slow cooker to let the kitchen appliance do all the work, and come home to a fully cooked meal.

INSTRUCTION BELOW.

  • Fill the insert of the single oven slow cooker with food and cover it with the lid. At least a quarter of the insert should be filled with liquid to keep the environment moist during long cooking times.
  • 2 Press the "On/Off" button on the left side of the electronic control panel in the front of the appliance. This will turn on the slow cooker to the low heat "Warm" setting.
  • 3 Press the "Cook Time" button on the right side of the electronic control panel to add hours to the timer which will show a total time in hours with a red digital display. Continue to press the button until the display indicates the desired cook time in one-hour increments up to 10 hours. The cooker will automatically adjust the temperature setting based on the amount of time you programmed on the timer. Cooking times of six hours or less automatically start on "High" heat and times of seven hours or more will start on "Low" heat. A small indicator light will come on below the word to tell you the cooking temperature.

  • Please rate this solution after use.

    Thank you and thanks for using fixya.

    Oct 03, 2010 | Maytag CWG3100A Gas Single Oven

    1 Answer

    Large oven burning food on top shelf when in fan assisted mode


    Always cook food in the middle of the oven. Assuming this is an electric oven, there is a heating element up there that will cause burning of food, much like a broiler works.

    If you must cook that high up in the oven, then cover the food your cooking with foil.

    Dec 16, 2009 | Kenmore Ovens

    1 Answer

    Lost my manual for chef condor integra oven - need to check auto functions and how to set them


    For TOuch Control oven:
    1. Press Finish Time touch pad
    2.press ^ touch pad until clock displays the required am or pm finish time.
    3. Press Cook Period touch pad.
    4. Adjust the cooking time as in step 2, using up and down arrow touch pads. (hours and minutes needed to cook food)
    5. Press Automatic touch pad.
    Press Fan touch pad to select fan speed. Red indicating light shows normal speed.
    7. Turn oven thermostat to desired setting.
    8. Press Keep Warm touch pad if keep warm function is required at end of cooking. 9. At end of cooking time a buzzer will sound for 1 minute and the KEEP WARM cycle will now operate until the meal is ready to be served.
    10. To cancel the Automatic cycle, press Manual touch pad and turn oven thermostat off.

    For Multifunction oven:
    1. Set time of day.
    2. Turn Function switch to Finish. 0.00 will be displayed.
    3. Turn display switch + to give the required am or pm finish time. (an illuminated bar in the bottom left corner indicates when the clock display is pm).
    4. Turn Function switch to Cook then turn Display switch to + till desired cooking period is displayed (hours and minutes needed to cook food)
    5. Turn Function switch to Auto. The automatic programme is now ready to use.
    Turn upper oven thermostat to desired setting.
    If keep warm function is required, turn function switch to Cook (optional)

    Happy cooking!

    Jun 14, 2009 | Ovens

    1 Answer

    NEFF OVEN PROBLEM - SMOKE AND FUMES COMING OUT OF OVEN


    Take the cover off that is surrounding the fan and you will probably find food or something there or on the fan blades. If it is not a food smell, then there is probably some wiring that is burning. I suspect that there is food behind the housing of the fan.

    Feb 02, 2009 | Ovens

    1 Answer

    Seems to be taking a long time to cook


    To preheat oven just select the temp you intend to cook at and wait until the red light goes out,it is then preheated
    Then you can put your food in and carrying on cooking.
    Yes you do put it on fan symbol, but make sure it is on the right one , as some ovens have fan only as well as fan and heat.
    Plz rate this solution.
    thanks.

    Dec 14, 2008 | Ovens

    1 Answer

    Oven not working properly


    I just solved this problem with my GE gas range. I waited forever for the oven to warm up. The igniter would glow, light the burner and burn for a minute or so and go out. It would repeat this process till oven reached operating temp, which took forever. Problem is in the igniter. It may be glowing, but it is not letting the gas valve stay open, because it is not hot enough to create resistance in it to keep gas valve open. I had replaced the thermostat thinking it was the problem. The good part about it was I could take it back because my buddy works at supply house. Once the igniter was replaced, the oven fired up and stayed lit till operating temp was reached. It will also hold the oven temp much better. Oh yea, the igniter will stay glowing while the burner is on. Hope this helps.

    Nov 29, 2008 | GE JGRP20 Gas Single Oven

    1 Answer

    Cook timer keeps chiming


    it starts chiming every min AFTER the timer counts down the allotted time?? thats normal operation its remonding you that the timer has completed cookin and to remove food from oven.. it will continue cooking with residual heat if not removed

    Nov 25, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

    1 Answer

    Hotpoint bottom oven


    Cooking is determined by 3 things so let's look at what they are and what they do.

    They are:

    1. The Fan Oven Element - This is very much the same as a light bulb only instead of giving off light it gives off heat. Like a light that is switched On or Off by a wall switch, the Element is switched On or Off by a Thermostat according to the temperature required. In short if the element fails your oven will be cold.
    2. The Fan & Motor - This sucks the air in through the centre mesh and circulates it around the Element and pushes the heated air out of the top, bottom and sides of the back-plate. Fan ovens cannot heat properly if the fan is not running OR if the fan runs too slowly as the motor starts to fail.
    3. The Thermostat. - This is basically an On/Off Switch that responds to the temperature in the oven. If The Fan is running correctly and you are achieving some temperature in the oven, then the fault will be with the Thermostat.
    I hope this Helps - Terry

    ALWAYS ISOLATE THE POWER SUPPLY BEFORE WORKING ON THEI APPLIANCE!

    May 06, 2008 | Hotpoint UY46 Style Line Stainless Steel...

    Not finding what you are looking for?
    Frigidaire 30 in. Electric Gallery Series Self-Cleaning Double Wall Oven Logo

    208 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Frigidaire Ovens Experts

    Marvin
    Marvin

    Level 3 Expert

    85206 Answers

    Bruce Denton

    Level 2 Expert

    273 Answers

    Alan Chouinard

    Level 2 Expert

    52 Answers

    Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...