Question about GE WSXH208A Front Load Washer
I need to know how to clean filter
This model does not have a drain filter. There are filter screens inside the inlet valve where the hoses attach onto the machine. Take hoses off and look inside where the water goes into machine to see screens. Also, take the other end off hoses to make sure there are not screened hose washers in either end of the hose which may need to be cleaned or replaced.
Posted on Oct 19, 2008
I found the solution to clean the lint filter on the GE Adora. Go to http://www.instructables.com/id/GE-Adora-Lint-Filter-Cleanout/?download=pdf
I just did this and my washer is now running instead of the flashing start/pause and door unlocking. It was fairly easy. Make sure you have towels and a flat pan to catch the water if you don't have the machine on a riser. There may be water inside so a wet vac may be helpful too. Once my washer finishes what was in it, I have these funky towels to clean. You'll be very surprised what you find in the filter! Best of luck!
Posted on Oct 26, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 23, 2009 | GE Washing Machines
Apr 10, 2008 | GE WSXH208A Front Load Washer
Aug 09, 2009 | GE WSXH208A Front Load Washer
Oct 13, 2008 | GE WSXH208A Front Load Washer
Sep 13, 2008 | GE Energy Star WCVH6260F Front Load Washer
Feb 11, 2008 | GE WSXH208A Front Load Washer
Aug 16, 2007 | GE Energy Star WCVH6260F Front Load Washer
393 people viewed this question
Usually answered in minutes!