Question about Schlage Electronic Lock FE595 Plymouth or Camelot series

1 Answer

Schlage FE595 keypad replacement part

Does anybody know if there are replacement keypads available for these locks?

Posted by on

  • 2 more comments 
  • Russell Lambert Feb 23, 2012

    I have already contacted Schlage and these parts are not available for purchase. They will repair on a warranty basis but if you're not the original purchaser, you're up the creek for help from them. The rep told me they do not have a part number listed for this circuit board but it has a part number on it but doesn't show up anywhere when I Google it and that is really strange. It's like it doesn't exist. I know they're out there but finding one is evidently going to be difficult.

  • Coaltowner Feb 23, 2012

    Thank you, Russell, for that feedback. EBay would be the only other place I could think of to hope to find your keypad. Sorry I can't be of more help.

  • Russell Lambert Feb 24, 2012

    Update from Schlage. I had commented on their site about no spare parts being available and one of their reps contacted me and says they are going to replace the lock for me. This is a very generous gesture on their part and if it comes thru, will be a great deal for me. However, the problem still remains that there are no parts available for the other people that have this same problem. The locks have a lifetime warranty on the finish and mechanism but the electronics only have a 1 year guarantee. And the electronics is so easy to replace and the two connections have plugs on them so it was meant to be replaced. It may seem cheap on my part but I would hate to throw away a $150 lock because the company refuses to sell a $20 circuit board. And if I had to replace it just after the one year warranty ran out, it would not be with another Schlage. As Coaltowner1 states below, Ebay may be the only place to find one and it will be a scarce listing. Also, if you do find one, make SURE you get the programming codes for it or it will be useless.

  • WILLIAM
    WILLIAM Jan 28, 2019

    The pads are complimentary. They just sent me 6 free of charge . I ordered them friday and had them Monday. from shlag

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 963 Answers

Your best bet is to contact Schlage directly. You can call during Midwest business hours (Mon.-Sat 7-7) at this number:
Warranty & Technical Information 1-888-805-9837.
For further information for the FE595 (installation & programming manuals and videos), go to this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionsandManuals.aspx

The manuals are PDF files. If you cannot open them for viewing, you need to first download & install Adobe Reader, which you can get here:

http://get.adobe.com/reader/

Good luck!

Posted on Feb 22, 2012

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: how to change the battery on my BE365-CAM-716 Schlage Keypad Deadbolt

Problem fixed by having my wife look it up on the Schlage website. The deadbolt has a flash memory so your combinations and codes will not be lost when the batteries are changed.

Posted on Sep 30, 2008

jyackle5

Jyackle5

  • 8197 Answers

SOURCE: how to recode locks

Here you go this is a pdf file on how to change code.
http://consumer.schlage.com/customerservice/pdfs/Programming_Deadbolt.pdf

Good Luck

Please rate as FixYa!

Posted on Dec 18, 2008

Anonymous

  • 1 Answer

SOURCE: Schlage electronic keypad lock doesn't work

I have the same/similar problem. I called the company 888 number. The customer rep promised to send me a new one. good luck

Posted on Jun 09, 2009

Coaltowner

  • 963 Answers

SOURCE: I can't find the code

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Posted on Mar 05, 2011

Coaltowner

  • 963 Answers

SOURCE: I lost the manual for

Go to this page for downloadable instructions and videos:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

A note about PDF files: If you cannot view a given file, you need to first install Adobe Reader. You can get the free download here:
http://get.adobe.com/reader/

Good luck!

Posted on Nov 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Exploded view of parts for fe595 schlage digital lock


If you haven't already found this out, parts are not available.
Response from Schlage:
Thank you for your e-mail. Unfortunately if he had these locks on his business there is nothing we can do as far as repair. And unfortunately there are no dealers who have the parts available for repair. These are strictly residential keypads. I am sorry about this.


Joshua Bozarth
Consumer Loyalty Representative
Schlage Customer Commitment Center
2119 East Kansas City Road - Olathe, KS 66061

Mar 12, 2014 | Schlage Electronic Lock FE595 Plymouth or...

1 Answer

Schlage keyless lock lost 6 digit code and no sticker inside either


You will need to take the keypad look off of your
door and record the 6 digit programming code and the two factory
default PIN codes. You then need to perform the factory reset to
erase any codes and restore the lock back to the factory defaults.
This procedure is outlined, as well as the programming of the device, in the attached instructions.

http://www.factorylocks.com/PDFs/Programming%20Instructions.pdf

Regards,
Leslie
Factorylocks.com
877-345-6257 (877-34-LOCKS)

Jan 13, 2013 | Schlage FE595 Plymouth Electronic Keypad...

1 Answer

The switch that unlocks my schlage FE595 door lock from the inside needs changed and I can't find a replacement.


Schlage's warranty policy covers the electronics for 1 year to the original purchaser. Last week I answered another question about buying the keypad assembly for a Schlage lock. Here's his experience:
"I had commented on their site about no spare parts being available and one of their reps contacted me and says they are going to replace the lock for me. This is a very generous gesture on their part and if it comes thru, will be a great deal for me. However, the problem still remains that there are no parts available for the other people that have this same problem. The locks have a lifetime warranty on the finish and mechanism but the electronics only have a 1 year guarantee...."
I suggest that you contact Schlage, but you will probably find that you can't buy the switch you need. Plead your case, ask to have it elevated, make a negative comment on their website like the other gent did.
Here's the contact information:
Go to Schlage.com Click on :"For your Home", then "Service & Support", and under that "Contact Us"
Good luck!

Feb 26, 2012 | Schlage FE595-CAM-ACC FE595CAM620ACC...

1 Answer

I need to change the batteries and reset the pass code in (2) keyless locks ("Locknetics On Board"). The owner's manuals were never given, and the key (Schlage) override was never used.(No...


How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:
Electronic Security-Keypad Entry Flex-lock FE595/Keypad Entry Auto-Lock FE575 Documents

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (third item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The eighth item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Jul 06, 2011 | Schlage FE595VCAM716ACC Camelot Keypad...

1 Answer

Fe 575 how do I change the battery? and code?


This link will take you to the page you need, to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:
Electronic Security-Keypad Entry....

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This is useful because there should be a sticker to be found on the backside of the keypad, with the code number that you need to reprogram the lock. This installation video will be useful to allow you to disassemble it and view the sticker.


Good luck!

Jun 28, 2011 | Schlage Electronic Lock FE595 Plymouth or...

1 Answer

My electronic door know fe575 wont lock anymore i opened it completely but can't put it back together again .


For solutions go to this web page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx#1

Scroll down to :
"Electronic Security-Keypad Entry Flex-Lock FE595/Keypad Entry Auto-Lock FE575 Documents"
There you will find videos and instructions for your lock. Good luck!

Apr 04, 2011 | Schlage FE575-CAM-ACC FE575CAM505ACC...

1 Answer

I need to change the combo for my fe595 and dont know how. the serial number is 715739 andthe user codes are: A 6152 and B 1514. How do I reprogram the combination?


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Feb 06, 2011 | Schlage Electronic Lock FE595 Plymouth or...

1 Answer

I lost the manual and i need to reprogram the codes


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on this page, showing how to change codes.

Good luck!

Jan 22, 2011 | Schlage Electronic Lock FE595 Plymouth or...

1 Answer

Schlage FE 595 - - Just quit. Changed battery, codes, etc. Get green blinking light - hear click - doesn't engage. Disassembled - spring good, slides work, placement of round headed pin could be the...


This link will take you to the page you need, to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:
Electronic Security.....
There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This is useful because there should be a sticker to be found on the backside of the keypad, with the code number ( the programming code) that you need to reprogram the lock. This installation video (fourth item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! A battery should last about three years under normal usage.
The ninth item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that program code that you found on the backside of the keypad.

A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Nov 15, 2010 | Schlage FE595-CAM-ACC FE595-CAM-716-ACC...

1 Answer

I am looking for the downloadable instructions for the FE595 V CAM 716 ACC. I need to change my code and I can not find my instructions.


This link will take you to the page you need, to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Entry Flex-Lock...
There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This is useful because there should be a sticker to be found on the backside of the keypad, with the code number ( the programming code) that you need to reprogram the lock. This installation video (fourth item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! A battery should last about three years under normal usage.
The ninth item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that program code that you found on the backside of the keypad.

A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Sep 20, 2010 | Schlage FE595-CAM-ACC FE595-CAM-716-ACC...

Not finding what you are looking for?
Schlage Electronic Lock FE595 Plymouth or Camelot series Logo

6,501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Schlage Locks & Locksmithing Experts

JOHN LAPIER

Level 3 Expert

2595 Answers

Mike

Level 3 Expert

4363 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a Schlage Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...