Whenever I lower the screen of my 1001PXD too much, it blanks as though I closed it. I need to tilt the screen very far back in order to keep the screen from blanking! Is there any way to fix this?

6ya staff

• 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

SOURCE: asus laptop - screen went blank and will not turn back on

I'm assuming your screen shows nothing at all, even the bios or boot screen as it turns on.

If you can hook it up to an external monitor then your video adapter is working. Try using the vga output on the laptop. If it doesn't show anything use you display select feature. I'm not sure what button it is on your laptop but on mine it is Fn+F8 (look for a button that shows a laptop and/or a rectangle).

If you can see it with an external monitor, you should try to uninstall and reinstall the video adapter. After you reboot the computer hopefully it will work.

However, if it still does not work, you will probably need to reseat the monitor cable. Do this by opening the screen panel. on the back is a flat cable tat plugs in to the LCD. This is usually covered by tape. Carefully remove the tape, unplug the cable and plug the cable back in. Don't forget to replace the tape!
I have fixed two computers in the last two weeks by reseating this cable.

Hope this helps and good luck!

Posted on Jan 11, 2009

Gerald Taber

• 22 Answers

SOURCE: can i fix my broken laptop.

Well, if the display comes on at all, then it must be a loose connection in the wiring. Sometimes this is a simple reseating of the main cable to the mother board which comes down from the display near or around one of the hinges (in most cases). I would suggest, purchasing a cheap external monitor, and plugging it into the rear or video out port if you have one, and switching your display to go to the external monitor, this will work good as a desktop scenario. Otherwise, you need to take it all apart and see if you can find out where the loose connection is, this is no easy task, and should be done by a qualified laptop repair person who has experience.

Posted on Mar 23, 2009

SOURCE: I have the identical problem as chrisdangelo

hello

I have read your problem and the solution to your problem may be following.

• The BIOS setting may have changed.You can reset the BIOS settings.
• The hard disk type may have changed..look for SATA and ATA.
• Or your window got corrupt.Reset the BIOS setting and reinstall the windows using boot able CD.
• if nothing work out then may be your hard disk connector is loose or your hard disk is gone.

Posted on Aug 05, 2009

SOURCE: Asus Eee pc 900 can't boot (blank screen)

I had the same problem and from other forums I found that you have to remove the memory and short cmos . To short cmos I use screw driver to connect two copper pads.

Posted on Sep 11, 2009

Steve Si

• 395 Answers

SOURCE: I moved my laltop and the screen went blank. I

Try pressing the Fn+screen toggle key (picture of monitor + screen on one of the F keys at top of keyboard)
e.g. on my laptop I press Fn+F8 three times

Posted on Jan 03, 2010