Question about Sharp AL-1641CS Color Copier

Open Question

Sharp AL1655CS drum light needs to be reset...I already changed the drum

Posted by on

Ad

4 Suggested Answers

Anonymous

  • 1 Answer

SOURCE: E1-00 code on Sharp al1655cs

TRY THE CODE 80-21 IT COULD HELP

Posted on May 17, 2009


Anonymous

  • 63 Answers

SOURCE: Fixya: Sharp AL-1631 copier doesn't recognize new drum?

press the following keys in this order:

  1. Clear Key (far right key on panel)
  2. Exposure Key (far left key on panel)
  3. Clear Key (far right key on panel)
  4. Exposure Key (far left key on panel)

once the panel goes blank make your display show
  • 24 then press your start key
  • then 7 press start
  • press C one time
  • 20 press start
  • 1 press start
Then press C until the copier restarts.

Posted on Oct 16, 2009

Testimonial: "Wow! A solution to my problem with a copier was posted within a couple of hours, and the procedure worked perfectly! Thanks. OB "

Ad

Adorjani Laszlo

  • 1316 Answers

SOURCE: need to reset the drum counter

Entering in the simulation mode:press Clear - Interrupt - 0 - Interrupt -Main code - Start -Subcode - Start.
When the clear all key is pressed the simulation mode is cancelled.When the interrupt key is pressed,the proces is interrupted and the screen returns to the subcode entering display.After cancelling the simulation mode be sure to turn OFF/ON the power and check the operation.
Main code 20 subcode 1 =Maintenance counter clear.
Main code 21 subcode 1 =Maintenance cycle settimg
subcode 2 =Mini maintenance cycle setting.
Maincode 22 subcode 1 = Maintenance counter display
subcode 2=Maintenance preset value display
subcode 3=Jam memory display
subcode4=Total jam counter display
subcode 5=Total counter display
subcode 6=Developing counter display
subcode 7=Developing preset counter value display
subcode 9=Paper feed counter display
subcode 12=Drum counter display
Maincode 24 subcode 1 =Jam counter clear
subcode 2=Trouble memory clear
subcode 7=Drum counter clear
subcode 8=Copy counter clear
Maincode 26 subcode 22=Language setting
Maincode 42 subcode 1=Developing counter clear
Maincode 43 subcode 1=Fusing temperature setting
Maincode 46 subcode 1=Copy density level adjustment
subcode 19 AE mode picture quality change

Posted on Nov 22, 2009

Sreelal Devadas

  • 66 Answers

SOURCE: I need to reset copy

Perform the following procedure to enter the simulation mode."#" key Interrupt key "C" key Interrupt key, then, then enter 24 start 7 start, then you can clear the drum count.Press 42, start, 01, start for clearing developer counter, and after clearing all this you have to press 'ca' to exit this mode, rate this and vote for this.

Posted on May 17, 2011

Testimonial: "Drum counter successfully reset. Thanks a lot."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sharp AL1655cs copier leaks ink in front just below the toner cartidge and drum


That would mean your devoper seals are gone. rebuild the developer unit.

Apr 04, 2018 | Sharp Office Equipment & Supplies

Tip

Sharp AL Series Copier Drum Light Cartridge Counter Reset


To reset the drum light on just about any Sharp AL series copier press the following key's in sequence and as quickly as possible (with 4 seconds for the first 4 keys)
Press "C" then the far left key (exposure mode) then the "C" key then the far left again.
So in other words C, far left, C, far left
Some model's use 2 other initial codes, so you may need to use one of these 2 alternate codes to get your display to go blank. The rest of the procedure is the same.
Alternate codes are: #, * , C, * or pound,star,C,star and also
#, Interupt, C, Interupt
If done correctly the display should go blank.
Then key in 24 as if you were going to make 24 copies.
Now press the "print" button
Now key in 7 as if you were making 7 copies
Now press the print button again.
You should now be getting flashing zero's on the display.
Turn the machine off then on again and your drum light should be gone!
You can usually reset this counter at least once to get twice the life out of your drum unit.
This works in the following models:
Sharp AL1000, Sharp AL1010, Sharp AL1020, Sharp AL1041, Sharp AL1200, Sharp AL1215, Sharp AL1220, Sharp AL1250, Sharp AL1251, Sharp AL1340, Sharp AL1451, Sharp AL1520, Sharp AL1521, Sharp AL1530CS, Sharp AL1540CS, Sharp AL1551, Sharp AL1551CS, Sharp AL1631, Sharp AL1641CS, Sharp AL1651, Sharp AL1651CS, Sharp AL1655CS, Sharp AL1661, Sharp AL1661CS

on Jan 04, 2010 | Office Equipment & Supplies

1 Answer

I need a drum cartridge for the 1631 copier


Sharp AL1631? If your drum light is on you can reset this drum light easily from the control panel. Just search for my tip on the issue by searching for Sharp AL series drum reset.
Good Luck and Thank You for using Fixya.

Mar 19, 2010 | Office Equipment & Supplies

1 Answer

Put new drum in and the light is still flashing. have already changed the ink,


did you clean the printer first? see if you can clean all over the connection around the old drum and reset the printer.

Sep 13, 2009 | Sharp AL-1661CS All-In-One Laser Printer

1 Answer

I need mac drivers for Sharp AL1655CS ptinter.


hi...try this one if you want to get the installer,driver here are link to you with pay (http://www.bluedogink.com/sharp-printers.html) but if you want free here is the other one way to get the drivers (www.freedriver.com)...good luck

Jun 14, 2009 | Sharp SHP AL1655CS Printer, Scanner,...

1 Answer

Sharp AR-275 Copier


Hello sir; there have no reset key for maintenence, whenevere PM light on you need to do PM service (such as replace drum developer, drum blade etc.)

May 19, 2009 | Sharp AR-275 Copier

1 Answer

Sharp copier AL1655CS will not let us copy until a new drum is installed. There is a code to get it going anyway. It limits you to a set number of copies even if it is working fine.


c photo c photo then prss 24 machine copy quantity key up and down arrow key then press print key press 7 press print key then solve your problem no show any code print fine thanks

Apr 13, 2009 | Sharp SHP AL1655CS Printer, Scanner,...

1 Answer

How to reset the drum count?


You Will submit C-ex-poser-C- ex poser=24- Ready.
out your drum signal ok*

Apr 11, 2009 | Sharp SHP AL1655CS Printer, Scanner,...

2 Answers

E1-00 code on Sharp al1655cs


TRY THE CODE 80-21 IT COULD HELP

Jul 24, 2008 | Sharp AL 1631 Copier

Not finding what you are looking for?
Sharp AL-1641CS Color Copier Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...