Question about Heating & Cooling

1 Answer

Remote gz-1002b-e3 how to reset

Remote start and off button

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers
Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: My remote control will not turn on. The timer

take your chellphone and open the camera,then take the control and push any button in front of the chellphone.if the remote is ok you see a light blinking.if you didnt see the light the eye of the small plate have the problem.

Posted on Dec 09, 2009

Anonymous

  • 1 Answer

SOURCE: manual for Akai reverse cycle airconditioner remote control

I have a Akai AC-GP10HRCI model portable air conditioner. We have lost the manual. It shows F8 on the display panel board and is not working at all. Please help. Thank you!!

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Fault E3 Have same problem, fan works fine but will not turn on cold air. Display shows "e3". I have a remote, but do not see a button "c".


Try this : Start the unit using the remote control, after that push the C button of remote control if C display at the unit then off the unit and plug out the power supply. Then plug in again and "on" the unit using the remote control.

Aug 09, 2008 | Kenwood KW85 Air Conditioner

1 Answer

I have an GZ-1002B-E3. I dont know how to get heatinh. How do I do with the remote control?


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Nov 12, 2014 | Televison & Video

1 Answer

Manual for mistral air conditioner model GZ-1002B-E3


http://www.service-aerconditionat.ro/Manual_Aer_conditionat_Galanz.pdf

Jun 29, 2013 | Heating & Cooling

1 Answer

My elderly father has an older model Heller Air Con - code is GZ-1002B-EY We are able to get the cold air flowing but it will not go to hot air - what could be the problem ???


This might be a couple things M's Jackie. 1 the reversing valve is stuck or bad,2 the swtch is broken , Is this a heat pump. Meaning you use it to both heat and cool the home? There is not gas connected to this unit?

Jul 14, 2011 | Heating & Cooling

1 Answer

I have just taken delivery of an air conditioning unit using a GZ-1002B-E3 IR remote control that does not work. How do I get a new remote control?


This is a new unit and you must make a complaint to the dealer immediately to replace your unit. Make sure that the battery is good , the position of the battery is correct and the remote is aimed at the unit.
If not ask for replacement, file a complaint as a new unit has a warranty.

Feb 17, 2011 | Kitchen Ranges

1 Answer

My remote control will not turn on. The timer function comes on but nothing happens. model GZ-1002B-E3 mistral MSS2.6


take your chellphone and open the camera,then take the control and push any button in front of the chellphone.if the remote is ok you see a light blinking.if you didnt see the light the eye of the small plate have the problem.

Dec 09, 2009 | Hitachi RAS-09UH Air Conditioner

1 Answer

E3 error message


Dude,

E3 refers to Paper Jam :)

this may come in handy:
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
îäíàêî, äëÿ ôóíêöèé 4 è äàëåå åñòü ïðèìå÷àíèå : òîëüêî äëÿ àçèè.
à âîò â îïèñàíèè ôóíêöèè 3 åñòü : Reset except for the
followings:
- USB serial number
- Destination setting
- Waste ink counter ...


Turn it upside down and than check.....same error code or diff.


Any help, can buzz me nytime ...


Thnks.

Jan 05, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Manual for Akai reverse cycle airconditioner remote control


I have a Akai AC-GP10HRCI model portable air conditioner. We have lost the manual. It shows F8 on the display panel board and is not working at all. Please help. Thank you!!

Jun 08, 2008 | Heating & Cooling

2 Answers

Fault E3


Start the unit using the remote control, after that push the C button of remote control if C display at the unit then off the unit and plug out the power supply. Then plug in again and "on" the unit using the remote control.

Oct 28, 2007 | Kenwood KW85 Air Conditioner

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

1,531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3480 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

john h

Level 3 Expert

22486 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...