Question about Integra DTR-8.3 Receiver

Open Question

Onokyo integra standby flashing - Integra DTR-8.3 Receiver

Posted by on

  • burhoe mark Mar 04, 2012

    cant get standby to stop flashing.This started while watching a movie from laptop plugged into front aux.The amp goes directly into protect although there is no problems I can find

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My integra av receiver model no DTR-70.1 amplifier displays but no sound what could be the problem?


http://www.integrahometheater.com/faqs.php Check the connections and try a master reset?
Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

Jul 03, 2018 | Integra Audio Players & Recorders

1 Answer

I have a Integra receiver model number DTR 66 and I have no sound. it appears to have everything connected and should be working. I would like to know how to reset the receiver or what steps do I need to...


NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/


To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Dec 26, 2010 | Audio Players & Recorders

1 Answer

INTEGRA 87 FSM, EMISSION TEST FAILS WHEN ENGINE IS WARM OR HOT, COOL IS OK!


Is the check engine light ( PGM-FI ) light on the dashboard came on?
There is a ECU ( computer ) under the passenger seat.
Count the number of red LED light flashing.
Usually it is the oxygen sensor problem if you see 1 light flashing.
If there is not check engine light, do tune up and if that does not fix the problem, check the catalytic converter.

Jun 12, 2010 | 1987 Acura Integra

1 Answer

My integra dtm 5.3 flashes protect when i turn it on and then shutdown and the standby light start flashing. cant seem to find an answer.


disconnect all speakers. do this with the power cord unplugged from wall. then re-try without speakers. if still in protect --shorted channel-which is repair/parts will be needed.

Feb 27, 2010 | Audio Players & Recorders

1 Answer

92 Honda Integra S4 flashing won't start when flashing


change the shift solenoid and it will help ,if this doesn't then change the main relay.

Nov 10, 2009 | 1992 Honda Prelude

1 Answer

Problem with hensel integra 500 srudio photo flash


To start with, if you don't know exactly what your doing, there is a 50% chance of being killed working on a strobe flash. If you need a flash that regulates the power, buy one that does to start with as you have more money in modifying one than a new one costs.

Jun 10, 2009 | Hensel U Flash Tube for the Integra 250...

2 Answers

1995 Integra has no spark


put a timing light on any plug wire press the button or, turn on the timing light: if it flashes you have a good ignition circuit

May 24, 2009 | 1995 Acura Integra Coupe

1 Answer

Have a DVD Changer DPC 7.5 from Integra and it is in standby mode and will not turn on


check the outputs of the power supply
if this are okay clean the machenical sction

Apr 25, 2009 | Televison & Video

1 Answer

Integra DPS 8.5


The Integra DPC-8.5 changer (as opposed to the DPS-8.3 single-play unit -- not sure which you have, as you mention DPS-8.5, a non-existent model) and most of the integra line of players, will sometimes be thrown into brainlock by out-of-step shutoffs. They will usually respond to the Integra/Onkyo instruction manual's directions to turn it off (you're already done that), then unplug the power cord from the back of the machine, wait a few seconds (make it 30 to be safe), then plug it back in and turn it on via the standby switch. The screen should display its welcome message, cycle through startup, and being working again. It is very much like rebooting a PC. In fact there is little difference.

If this doesn't work then something has gone wrong inside and probably has nothing to do with your shutdown method on the way out the door. These things do happen. Hopefully by now you've already figured this out. If not, give it a try. It usually works.

Jul 04, 2008 | Integra DPS-8.3 DVD Player

Not finding what you are looking for?
Integra DTR-8.3 Receiver Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

Ekse

Level 3 Expert

13434 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...