Question about Krups Small Appliances Espresso Machine
for the error code 06. (this is what I got from a guy on a tech support line)
The issue is with the waterfilter. If you haven't changed it for a long time - change it. If you recently got a new one follow these steps:
- take the filter out
- unplug the machine from electricity
- plug it back in
- install filter (go into prog- service- install new filter)
It should remove the error. Haven't tested that yet, but that's what I got :)
Posted on Apr 27, 2009
Pump in actuator down phase
The flow has not dropped (> 50ml/min)
after the actuator has been filled to the
maximum (80ml); there is a water
leakage and the actuator does not fill
Look for the leakage source:
hoses, actuator, priming valve?
Switch or distributor switch
control fault: incorrect detection
of cams error in distributor
position in cylinder descent
Flowmeter hoses changed over
Distributor problem (leakage at
Faulty connection between the
2 picto boards
If no leak detected, replace
power board V26 with V29
Posted on Jul 07, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 10, 2010 | Heating & Cooling
May 10, 2010 | Krups Small Appliances Espresso Machine
Apr 14, 2010 | Krups XP7230 Compact Super Automatic...
Oct 26, 2009 | Krups Small Appliances Espresso Machine
Mar 13, 2009 | Krups Small Appliances Espresso Machine
Mar 04, 2009 | Krups XP7230 Compact Super Automatic...
Jun 26, 2014 | Krups Small Appliances Espresso Machine
4,004 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: