Question about Maytag Performa PAV2200
It fills on wash and rinse cycle but won`t stop. won`t go into aggitating cycles or drain. it will drain and go into spin if it is switched mannually the tube going from switch level is ok no cracks ect.... but it won`t stop filling what else can it be. if it is a switch which one and can i change it my self can`t afford a tech or repair persson.
Depends on what you have to do to stop water. If unplugging or switching off at control stops it, it's most likely the pressure switch. If only way to stop water is to cut spigot off, then water valve is bad.
Posted on Nov 02, 2017
The switch the tube connects to shuts the water off. Will it cut off on high medium or low level. You can try blowing on the tube to see if it works. It should cut off when you blow.
Posted on Nov 02, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I had the same problem. and I did the suggestion dated 9/26/06. Too another piece of hose and attached it to the water level switch and blew into it. and the machine began aggitating. My question is... DO I replace the hose?? or switch?? Now that I have purchased a new machine. I find a solution, Oh well. thanks df
Posted on Mar 03, 2007
SOURCE: maytag washer overfilling
Easy fix. Do this: Remove the rubber tube coming from the bottom of the tub up to the water level switch right there at the switch itself. Blow through it to remove the sediment in the bottom of the tub so that air pressure from tub to switch will be kosher. Put the hose back on the water level switch tight and pump out any water in the machine.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Posted on Dec 19, 2008
sounds to me like you have a bad transmission
what happens when you take the agetator off
does it still make the noise or does it go away?
if it goes away when you take the agetator off then you have a bad agetator
Posted on Aug 24, 2010
Tips for a great answer:
Oct 05, 2014 | Washing Machines
Nov 08, 2012 | Maytag Washing Machines
Oct 31, 2012 | Maytag Washing Machines
Sep 05, 2010 | Maytag Atlantis MAV6000 Top Load Washer
Apr 22, 2010 | Maytag Performa PAV2200
Jun 12, 2017 | Maytag PAV2300 Top Load Washer
Oct 07, 2009 | Maytag Neptune FAV6800AW Top Load Washer
Sep 22, 2009 | Maytag HAV3460AWW Top Load Washer
Jul 02, 2009 | Maytag Washing Machines
Apr 14, 2009 | Maytag PAV2300 Top Load Washer
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: