Question about Whirlpool RBD305PD Electric Double Oven
Posted by Anonymous on
This oven uses control board part number 8302967. E6 F2 is due to a failure in the control board. This board is no longer available from Whirlpool. It can be rebuild at www.fixyourboar.com with a 2 year warranty.
Posted on Aug 14, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Whirlpool code E6 F2
Turn the power off to the oven.
Check the connection from the key pad to the clock.
If the connection is good then put back together.
Turn power back on and press the cancel button.
If the error code returns after 60 seconds then the keypad will have to be replaced.
Thank you huuum
Please remember to leave a rating
Posted on Oct 16, 2008
Your cancel key is defective at this point. follow these steps below?
1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).
Posted on Aug 08, 2009
This could be either a problem with the keypad or the control. Here's the manufacturer's "recommended repair procedure":
1. Check keypad connector for firm connection.
2. Press CANCEL. If error code returns after 60 sec., replace keypad.
3. Replace control.
... not so good, they want you to replace the keypad and if that doesn't work replace the control board ... both very expensive!
First I suggest trying to clean up the keypad ribbon connection into the control board ... this is free! We put a procedure on our website that describes how to do it, heres the link:
If you come to the conclusion that the failure is due to the control board, we can have a look at it for you if your comfortable to remove it. We repair oven controllers.
Or, if you want to send us the keypad and control board as a unit (they are bolted together) we can determine which is the problem and repair as needed.
Posted on Oct 03, 2009
Tips for a great answer:
Nov 13, 2011 | Ovens
on Aug 17, 2015 | Ovens
Aug 11, 2011 | Whirlpool RBD305PD Electric Double Oven
Apr 21, 2011 | Whirlpool RBD245PDS Electric Double Oven
Mar 15, 2011 | Whirlpool GBD307PR Electric Double Oven
Jan 06, 2010 | Whirlpool RBS245PDS Electric Single Oven
Jan 04, 2010 | Whirlpool RBD306PD Electric Double Oven
Sep 19, 2009 | Whirlpool Ovens
Dec 20, 2008 | Whirlpool RBS245PDS Electric Single Oven
234 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: