Question about Hitachi Heating & Cooling

3 Answers

Hitachi ACE follow me red filter light is always on

ACE Follow me Split AC . Filter red light is always stay on .How to disable this light?

Posted by on

  • ravi_tejpal
    ravi_tejpal May 24, 2012

    i was facing the same issue, you need to open the front cover of your AC remote and need to press the Asymetric swing button, it will work like a charm..enjoy!!

  • Recluse gypsy Apr 24, 2017

    Thank you !

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The red light turns on automatically after 120 hrs of running to remind us for cleaning the filters. once you cleaned the filters and inserted back , then just keep ac in stand by mode, open the remote panel and press the button on extreme right bottom of the remote ( see carefully in the remote, there is very light image of the filter is made along with the button). red light will go off. no need to press the reset button.... enjoy

Posted on Jul 08, 2013

  • 1 more comment 
  • goutham rokkam
    goutham rokkam Mar 27, 2014

    what if the red filter light was on for a while and the ac got switched off after a while?

  • Anjan roy Oct 24, 2016

    Thanks Sidharth.......its solved because of your answer.

  • Cve Wrld
    Cve Wrld Jun 28, 2017

    Thanks
    It worked

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hitachi window ac red led filter light on - to switch it off - switch on your ac and press the swing button on the right bottom side with three lines below it , it will switch off and the timer for hours as people are saying here 120 hours ll start again. I tried this hope it ll helpful.

Regards
Sidharth.

Posted on May 07, 2016

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After 120 hours of work cycle the red light will come on to remind us of cleaning of filters. After one cleans the filters we find it glowing still. The remote has an asymmetric swing button on the inside panel of the remote commander. Putting the AC in standby mode i.e switch off if its on or just power supply on in this mode we have to press the Asymmetric swing button for a couple of seconds. The Red light will be gone and the AC will start is 120 hour countdown again.

Posted on Oct 04, 2014

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

kel1guy2002

Kelly

  • 3740 Answers

SOURCE: where is reset button located

Look at your remote carefully. There is a bal pen type push to reset filter button on the remote. Depress the rest button and it should reset. Also on the contol panel you can also reset it by depressing the mode and the UP temp arrow buttons for 5 seconds.


Thanks for choosing FixYa.

Kelly

Posted on Sep 05, 2010

Dennis Boxerman

  • 1300 Answers

SOURCE: red blinking and ac not working

If the power "flickers" and unit fails but will restart once the breaker is reset, this sounds absolutley normal. It is a safety device that keeps the unit from burning up things due to improper power being supplied. As long as resetting puts it back into service with no issues, don't worry about it.

Posted on May 14, 2010

Sethu_jak

  • 1 Answer

SOURCE: where is reset button located on whirlpool split

Its inside the front panel at right side

Posted on Jun 21, 2011

kel1guy2002

Kelly

  • 3740 Answers

SOURCE: where is reset button located

Look real hard on the remote. There is a mini "use a ballpoint pen" push to reset filter button on the remote.

Electronic control panel: (not all models)
Hold the mode button and the Temp Up arrow depressed for about 5 seconds. It should display the temp and the FL should disappear.

Thanks for choosing FixYa.

Kelly

Posted on Sep 05, 2010

David Longino

  • 94 Answers

SOURCE: I am using Whirlpool MasterMind

Unplug unit for 10 minutes

Posted on Apr 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Hitachi 1.5 ton Split AC and in that Red light always glows (the one indicating filter grid) How can I turn it off?


I've never owned one of those kind of air conditioners, but most air conditioners have a filter where air from the room enters the unit. They need cleaning or replacement and that sounds like what the indicator is suggesting. Might check manual or download one off internet.

Jun 09, 2016 | Hitachi Heating & Cooling

1 Answer

How to remove filter light in Hitachi split AC


Ensure you replace the filter on the AC or
How to clean filter of split AC

When its turn off,not unplugged, press at the same time ''Function Button" and the ''AUTO Swing" button on your Remote Controller.

Apr 10, 2016 | Hitachi Heating & Cooling

2 Answers

AC power light blinks but not starts


The outside unit has a problem. Have it tested.

May 05, 2017 | Hitachi Heating & Cooling

5 Answers

LED LIGHT BLINKING OF HITACHI SPLIT AIR CONDITIONER


Did you figure out why the ac wasn't responding to the remote? I am having the same problem. I just cleaned out the filters but it's still not responding to the remote. I have already tried reset button in the remote, which didn't help. I am pretty sure that the remote is not out of battery.

Jun 18, 2012 | Hitachi Heating & Cooling

1 Answer

Hitachi split ac ace cutout how to go to standby mode


Its very simple to remove that red light glowing on the AC, just switch-off your AC with your remote, but don't turn off the switch that resides with in the plug, remove filters wash gently and dry under shade and place them again in the AC, now keep it without turning-off the switch for 30-60minutes this is called stand by mode. Now take the remote open the panel and press the button that is situated in 4th row and 3rd column. By doing this the red light will be turned off and enjoy your AC.

Apr 17, 2012 | Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

13,305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Heating & Cooling Experts

Lawrence Oravetz

Level 3 Expert

10543 Answers

jws1013

Level 3 Expert

1604 Answers

bobalix

Level 3 Expert

471 Answers

Are you a Hitachi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...