Question about Toshiba COPIERS E-STUDIO 520 Copier

2 Answers

Error code c447 - Toshiba COPIERS E-STUDIO 520 Copier

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toshiba Master
  • 727 Answers

Fuser error...
Clear the message... 08-400 "0"
If occur again, u need to check the fuser probable, such as themistor, IH board, connectors and etc...

Posted on Jul 13, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toshiba Expert
  • 414 Answers

If 1st time occur, u can just go to 08-400, reset the value to "0" then restart the machine.












When this code not cleat 08-400 then check these all thengs..
1.Check the thermistors
(1) Check if the connectors are disconnected.
(2) Check if the main and edge thermistors are in contact with the surface of the fuser roller properly?
(3) Check if the harnesses of the main and edge thermistors are open circuited.




2. Check the IH board and IH coil




(1) Check if the IH coil is broken.
(2) Check if the connector of the IH coil is disconnected.
(3) Check if the thermostat is blown.
(4) Check if the connectors on the IH board are disconnected (AC input connector and LGC I/F connector
CN455/456).
(5) Check if the IH board or the switching power supply unit are abnormal.
• Replace the IH control board.




3. Check the LGC board
(1) Check if the connectors CN316 are disconnected.
(2) Check if the conductor pattern on the LGC board is short circuited or open circuited.
(3) Replace the LGC board.

Thanks
Best Regards

Posted on Sep 01, 2012

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

raj somaiya

  • 5370 Answers

SOURCE: error code c447

Error code C447 indicates problem with Fuser temperature problem.Get the thermister cleaned on the fuser unit.If the thermister gets faulty or dirty, it will not let the fuser unit heat to the required temperature and this will cause the problem.-------- Also check that all the door covers are properly closed, also inspect if there is paper jam got there, causing this error.------ But if all this is not helping, then thermister needs to be replaced.---- As per error code C447.------ This will help.Thanks.Helpmech.

Posted on Sep 07, 2011

fivemayur

Sanjay Parihar

  • 414 Answers

SOURCE: error code c447

All error code soloution of fuser unit Fuser Unit Error Status Counter
Purpose
When a fuser unit related error (error code C41, C43, C44 or C45) occurs, the set value of the fuser status
counter varies, depending on type of error.
Displaying and checking the set value of the fuser status counter can analyze a cause for the error. If
any of "2 to 9" is set at the fuser status counter, the fuser unit will not be operated for safety reasons.
After the fuser unit related error is resolved, if "0" is set, the fuser unit will be operated as usual. If any of
"10 to 19" is set at the fuser status counter, the fuser unit will be operated as usual, even if "0" is not set
after the fuser unit related error is resolved.
C41: Thermistor or heater abnormality at power-ON
C43: Thermistor abnormality after abnormality judgment
C44: Heater abnormality after abnormality judgment
C45: Thermistor abnormality during printing
C46 to C49: Reserved
Description
When this code is used, the current set value of the fuser status counter is displayed. Only "0" can be
manually entered, in order to restore the fuser unit to its normal operation, after the fuser unit related
error is resolved.
For further reason why the counter value differs despite the same error code, refer to 5.1.7 or 5.1.8
[Fuser unit related service call] in the Service Handbook.
0: No error 10: C47 (Reserved)
1: C41 (Once) 11: C47 (Reserved)
2: C41 (Consecutively occurs) 12: C48 (Reserved)
3: C46 (Reserved) 13: C49 (Reserved)
4: C43 14: C47 (Reserved)
5: C44 15: C48 (Reserved)
6: C45 16: C49 (Reserved)
7: C44 17: C47 (Reserved)
8: C45 18: C48 (Reserved)
9: C44 19: C49 (Reserved)
* Default: 0
Setting Timing
Use this code to resolve the fuser unit related error (error code C41, C43, C44 or C45). Resolve the
error, and set "0" (or reset the counter), in order to restore the fuser unit to its normal operation.
Caution
Remember to resolve the fuser unit related error, and then reset to "0." also 447

Posted on Feb 02, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset code for toshiba photocopier machine model 3508 error code c447


08-2002 set to "0"

If problem persist, u need to check fuser unit especially themistor

Jul 04, 2017 | Toshiba Office Equipment & Supplies

1 Answer

Toshiba code c447


0 aur 8 ko ek saath daba kar machine on kare iske baad 400 type kare aur print key dabaye jo bhi figure aaye use 0 kar de aur enter key dabaye aur intrrupt daba kar machine off karke firse on kare machine se service call hat jayega

Jan 17, 2014 | Toshiba Office Equipment & Supplies

1 Answer

Toshiba E-studio 230 Copier shows this message call for service 631012


Well, first of all Francis, that isn't your error code, that's your meter (the odometer of the copier so to speak). Error codes will show C--- or E---
examples are C447 (fuser error) or E010 (fuser related jam)

Jan 10, 2013 | Toshiba E-studio 230 Copier W/net Print,...

1 Answer

Our 06 dodge ram has three codes. C447, S125, & 283. I am wondering what they all mean.


buy a book at autozone for your truck and you see all your codes.

Dec 25, 2010 | 2006 Dodge Ram

Not finding what you are looking for?
Office Equipment & Supplies Logo

3,280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

727 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...