Question about RCA R52WH73 Projection Television

Open Question

I have changed out the H.O.T. and the flyback on my R52WH74 model tv because it wouldnt come on and it would make a chirping noise I checked all the fuses and capacitors now with the new parts in the green power button light comes on for about 2 seconds and then goes off with a low pitch chirp it does this 3 times and then nothing i checked all fuses and capacitors again and found that 3 are not responding one is cp049, rp050 and cp050 could thiese be my problem or is it something else?

Posted by on

  • Terry
    Terry Oct 26, 2014

    What was the answer? I have same situation with RCA D52W20.

×

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: My RCA - R52WH74 television will not turn on.

You need to replace the flyback and the H.O.T. transistor. the 270125 flyback with H.O.T. repair kit from www.tvrepairworld.com should fix that issue. The kit also contains the CD with detailed instructions

Posted on Jan 06, 2010

Ad
Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: RCA hd52w59 out. Powerlight flashed 3x with chirp

Sounds like the Horizontal output transistor needs replacement.

Posted on May 27, 2010

Testimonial: "Appreciate the recommendations provided. Even though the TV didn't respond, the help was just what I needed."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

60 in RCA rear projection making a chirping noise no picture no sound


Chirping is almost always caused by the HOT transistor and Flyback transformer. You can get the Flyback with HOT repair kit for your model from www.tvrepairworld.com they are listed under the RCA Repair kits.

Feb 16, 2012 | RCA P60921 60" Rear Projection Television

1 Answer

My RCA - R52WH74 television will not turn on.


You need to replace the flyback and the H.O.T. transistor. the 270125 flyback with H.O.T. repair kit from www.tvrepairworld.com should fix that issue. The kit also contains the CD with detailed instructions

Jan 06, 2010 | RCA R52WM24 52" HDTV Projection Television

2 Answers

Zenith 32" TV Chirping Noise No Picture


Components in Power supply are bad most likely a 35v 100ufd capacitor if not then your Flyback transformer is bad

Jun 09, 2009 | Zenith IQB32B42W 32" TV

1 Answer

After pushing the power button on there a chirping noise coming from the back of the tv and doesn't turn on.


hi, the chirping noise is either the switch mode transformer or the flyback transformer, more likely the flyback as thomson built sets are infamous for them failing, nothing you can do you`ll have to call a tech to verify which has failed, not a major repair job, gl, video-tek

Jun 08, 2009 | GE 46GW945 46" Rear Projection Television

1 Answer

Blinking green light in front, high pitched chirping noise, no picture.


u may have a high voltage problem , 1 may be the flyback transformer , or may be u vertical circuit , need to take it to do tv shop for service

May 08, 2009 | Televison & Video

1 Answer

RCA 31" TV pakes high pitched chirping noise


Did you check the Horizontal Output transistor to see if it were shorted, and also check the MOSFET of the switching power supply. 

Jul 25, 2008 | Televison & Video

1 Answer

Chirping noise


you need to replace the horizontal output transistor or the flyback. the flyback is the most likely cause. Let me know if you need more information

May 13, 2008 | RCA P52926 52" Rear Projection Television

1 Answer

No picture or sound - TV makes chirping noise


The chirping sound is the power supply coming up then breaking down because there is a short somwhere in the high voltage. The most common fail in this area is the horizontal output is shorted ( 237470 ) but what cause this short could be simple cold solder joints or the High voltage transformer ( 239111 ) If you have noway to "ring" the flyback change both parts

Feb 13, 2008 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

RCA36 INCH MODEL #F36685


Bad flyback transformer....please provide service number from
back of set for more info..........................T.

Oct 27, 2007 | RCA F36685 36" TV

1 Answer

My RCA TV turned itself off and started making chirping noise


You have poor solder connections these sets are famous for this! Solder Flyback transfomer pinns this should fix it.

Oct 07, 2007 | RCA D52W19 52" Rear Projection Television

Not finding what you are looking for?
RCA R52WH73 Projection Television Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...