Question about Mitsubishi Mr. Slim MXZ30TN Air Conditioner

Open Question

Mr slim U2 error code - Mitsubishi Mr. Slim MXZ30TN Air Conditioner

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: what is fault code u2 on a mr slim

Discharge temperature unusual
(maybe low in gas or clogged with oil)

Posted on Apr 21, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: Mitsubishi Mr slim Airconditioner error check P8

I Have same problem

Posted on Sep 28, 2009

mrbenz7

  • 12 Answers

SOURCE: eo error code

You need a professional here. Once this has been repaired, I would suggest running the wiring to the outdoor unit inside some sort of piping to protect it.

Posted on Jul 21, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: MMy Mitsubishi Mr. Slim Air conditioner is

Hi,
Here is where you can find all the info you will ever need about Mitsubishi Air Conditioning units...
Check out this tip that I wrote about that...

Mitsubishi Air Conditioner Troubleshooting and Repair
http://www.fixya.com/support/r5643983-mitsubishi_air_conditioner

heatman101

Posted on Aug 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error code e4 unit airconditioner


Not sure about E4 , but 4 blinks or flashes usually means the compressor isn't starting properly. It could be a faulty start capacitor or wiring or faulty indoor PCB (Board)

Oct 18, 2013 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

Hi I have problem with my photocopaier. Sharp ARM236. It shows Code: U2-40


U2-04 EPROM error
U2-11 Main counter error
U2-12 EPROM error

As you can see there are many U2 error codes. Needless to say, find your code and the replace the bad part. The battery is on the main board. The EPROM is on the main board.
If you find your code, replace the part and error still remains -- replace main board.

Aug 07, 2011 | Sharp AR-M237 Copier

2 Answers

What does error code E6 mean? On a Mitsubishi Mr. Slim A/C


Code E6
Error detail Indoor/outdoor unit transmission error (signal receiving error).
Inspected unit Indoor.

Air Conditioning Fault Codes

Aug 01, 2011 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

We have a Mitsubishi Mr Slim air conditioning unit, i've checked the circuit breaker, the remote works but the unit will not engage.


DOES IT DO ANYTHING I THINK ON THE RIGHT SIDE IF YOU HAVE YOU BOOK IT FLASHES ERROR CODES IF YOU HAVE THE COVER OFF

Sep 18, 2010 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

Eo error code indoor unit runs 2-3 seconds then gives eo error code problem started when mr chipmunk chewed mr slims 12 volt wire connecting to out door unit and shorted it . Outdoor unit has bad control...


You need a professional here. Once this has been repaired, I would suggest running the wiring to the outdoor unit inside some sort of piping to protect it.

Jul 20, 2010 | Mitsubishi Mr. Slim MXZ30TN Air...

3 Answers

Ac unit shuts down


See this document for P8 code on Mitsubishi Mr Slim MXZ30TN... It is likely you can get the fix just from following the diagnosis steps 1-7. http://www.digelair.net/pdfs/TECHLIT/MITSUBISHI/MrSlim_P-SERIES_Troubleshooting_TIPS.pdf

Jul 02, 2009 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

U2 PROBLEM blinking U2 and will not print


U2 RAM error
U2-00 EPROM error
U2-01 Counter error
U2-01 Memory back-up battery dead
U2-04 EPROM error
U2-11 Main counter error
U2-12 EPROM error

As you can see there are many U2 error codes. Needless to say, find your code and the replace the bad part. The battery is on the main board. The EPROM is on the main board.
If you find your code, replace the part and error still remains -- replace main board.

Feb 03, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

What is fault code u2 on a mr slim


Discharge temperature unusual
(maybe low in gas or clogged with oil)

Jan 30, 2009 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

Error code U2 on a AR201 copier


To find out the sub code for the U2 error hold down the Start key. Below is a list of the errors:
U2-04 EEPROM serial communication error
U2-11 Counter check sum error
U2-12 Adjustment value check sum error (EEPROM)
U2-40 CRUM communication error

To clear the U2-40 error try pulling out the toner cartridge and firmly reinstalling it. If that doesn't work you must install a new toner cartridge. There is a CRUM chip on the cartridge that keeps up with how many impressions have been made with that cardridge. You cannot "refill" these cartridges without replacing the CRUM. This problem occurs frequently with remanufactured cartridges.

To clear other U2 errors you must enter simulation mode.
Perform the following procedure to enter the simulation mode.
Clear key - Interrupt key - "0" key - Interrupt key - 16 - Start key - Start key. The unit should reset.

Nov 11, 2008 | Sharp AR 201 Copier

Not finding what you are looking for?
Mitsubishi Mr. Slim MXZ30TN Air Conditioner Logo

Related Topics:

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Heating & Cooling Experts

NOEL
NOEL

Level 3 Expert

8537 Answers

vince

Level 3 Expert

1234 Answers

Stuart Slabber

Level 1 Expert

25 Answers

Are you a Mitsubishi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...