Question about Denon AVR-2802

3 Answers


Dear Sir, i had DENON AVR 2802 , AND IT WORK VERY WELL SIENCE LAST NOV, BUT AFTER THAT I HAD PROBLEM IN ITS WORKING. Receiver comes ON normally, Display is comming Ok.,All the functions are working O.K., except Volume. VOLUME display is varying on the penel, while operated. When Unit 1st swith on, very low sound can be heared in the headphones and front Left & Right Speakers, and the moment any function is operated , volume cut off to ZERO & does not come on unless unit is swithed on again. Sound Initially is comming LOW ON FULL VOLUME, DISPLAY REMAINS ON even the sound is not comming . We tried replacing EXT IN AV UNIT (1U-3369-1) board.Checked all the supply voltages on power unit (1U-3368-1), FOUND NORMAL. ALSO CHECKED ALL THE POWER TANSISTERS ON POWER UNIT. NO BURNING COMPONENT OR BURNING SMELL IS OBSERVED. SIR, Its my earnest request to guide me and help me to solve this problems, as you might be aware of this problem, and how to solve this problem. Your early reply will be highly appriciated. and even that will maker our life alive with DENON music. Thanking you in advance for doing the needful Truely yours Ramesh Parekh (Service Engineer)

Posted by on

  • andyrey1977 Aug 22, 2008


    I have exactly the same issue. No sound output from either the headphones or speakers. Was an answer ever found to this issue?



  • Anonymous Apr 01, 2009

    my denon AVR 2802 has the problem that power on & all the funtion are normal, but no speaker out put.



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

If "Digital" sign blink on front panel, it means DSP do no start properly. If DSP do not start, main UC mute audio. Change IC, AT49LV002-70TC (IC 817 ) at DSP board (Denon P/N: 262 3010 006).

Posted on Sep 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a same problem,and please witch mute transistors,part number on diagrams,please!Thanks.Yes,for me I have mute 4,5V on mute inputs on all amp.

Posted on Feb 22, 2016


Replace muting transistors in dsp panel

Posted on Sep 05, 2007

  • Ramon Hermsen
    Ramon Hermsen Jan 06, 2014

    Where can i order the ic817, is it a blanc ic?

  • Pera Detlic
    Pera Detlic Jan 11, 2016

    witch muting transistor,witch part number,where on board,some more info,on this model have minimum 10 muting transistors!!!!!!!!!!!


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Denon AVR-2802 Optical Issue

If you look at page 16 of the user manual it tells you how to assign the devices to the optical connections. Once this is done it should work.
If you don't have the manual just type "denon avr 2802 manual" into Google and it will show a free PDF file of it. On my search it came up first!

Feb 09, 2018 | Denon AVR-2802

1 Answer

I have denon avr-2802.. suddenly no sounds will come out but the power ok.. help me pls..

Register and download the manual for free at

Is it silent for ALL inputs including the Test Tones?

Page 33

Function incorrect, Muting, Tape or EXT Input on when it shouldn

Feb 19, 2011 | Denon AVR-2802

1 Answer

I have a denon avr 2802. the remote powers the

Try doing a factory reset by turning off main power switch.hold down speaker a and b buttons while turning on main power switch ,display will flash 3 time s then release buttons,this then returns unit to factory default settings.

Apr 13, 2010 | Denon AVR-2802

1 Answer

I am trying to connect my wii to my denon avr-2802 using the wii's composite cables. i get sound but no picture. help.

After connecting the Wii cables, connect a video cable to the "monitor out" connection to a compatible input on the TV.

Feb 15, 2010 | Denon AVR-2802

1 Answer

Technical Problem on my Denon AVR 2802

How good are you with electronic repairs...? Do it if only you are confident...

The way you describe you problem it seems more like poor solder connections somewhere on the board. Usually these are at the voltage regulators where there can be some heat. Also, look for any connections that appear to be grasiny or have rings and resolder them too.

Alternatively, suggest that you take it to the Denon service center closest to you.

Best of Luck..

Mar 05, 2009 | Denon AVR-2802

2 Answers

Denon avr 2802 can't get subwoofer to work all else fine

in the Denon setup under speaker configuration set the sub to LFE+Main

Jan 02, 2009 | Denon AVR-2802

1 Answer

Denon AVR 2802 - Unit Turning Off

If DIGITAL sign blink, this mean DSP board is defective. It will cut the sound on the AMP section. DSp is maybe defective.

Jan 12, 2008 | Denon AVR-2802

1 Answer

Denon 2902 No Sound


Sep 04, 2007 | Denon AVR-2802

1 Answer

Also problem with Denon AVR-2802

If DIGITAL sign on the display blink, it mean the DSP board is defective. probably the DSP itself

Jul 22, 2007 | Denon AVR-2802

Not finding what you are looking for?
Denon AVR-2802 Logo

8,090 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts


Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers


Level 3 Expert

85216 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides