Question about Craftsman 25cc 2-Cycle Gas Blower/Vac

1 Answer

Need gas mix solution - Craftsman 25cc 2-Cycle Gas Blower/Vac

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 184 Answers

Check age of gas. Cannot be more than 30 days old.
Make sure to use fresh gas w/synthetic 2-cycle oil @ 40:1 ratio (1 gal.) Gas to 3.2 oz. Oil).Do not use old or stale oil/gas mixture. Always use the proper oil/gas mix. If you do not, your engine will suffer rapid, permanent damage.

Posted on Oct 18, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Petrol & Oil mix - one third of oil to 1 gallon = what in litres


You need to go by the oil to gas ratio. 1/3rd what?

Google 50:1 (or whatever) mix in litres

and you will find this

Google 50 1 mix in litres Google Search

Mixing ratios. For a mixing ratio of 1 : 50 you need 5 litres of high-octane gas and 0.10 litres (100 ml) of STIHL two-stroke oil.

Dec 03, 2017 | Garden

1 Answer

Do you have to mix the gas with oil on a 89 fz600r? And if so what's the ratio?


No, you do not need to mix the gas and oil because it is a 4-stroke engine and has separate compartments for oil and gas. The only time you would need to mix oil and gas is for 2-stroke engines.

I’m happy to help further over the phone at https://www.6ya.com/expert/zamaar_e361c354500963e1

Jul 03, 2011 | 1989 Yamaha FZR 600

2 Answers

Do i need to use gas and oil? and if so how much?


Consult your owners manual or read around the fuel cap area for the exact mix, but you will need 25:1 to 30:1 oil mix.

Jun 16, 2011 | Husqvarna 28cc Gas Line Trimmer

2 Answers

What kind of gas


Regular unleaded gas mixed with 2 cycle oil. (You need to check your model for mixture ratio but 30:1 (thirty parts gas to one part oil mix) is usually a good place to start) You can find mixing instructions on the back of the 2 cycle oil container

Dec 08, 2010 | Garden

1 Answer

I need to know if I need to mix the gas for my Yamaha 2002 Banshee 350 Twin or if I can just put in straight gas


Normally these days on 2 stroke engines you put fuel into the tank directly and then you should also have a reservoir for your oil mix on the LH side cover. The system will mix the required fuel to oil mix themselves. Good enough?

May 21, 2010 | Motorcycles

1 Answer

Gas mix?


Straight Gas no mix for a 4 cycle.

May 16, 2010 | Troy-Bilt 4-Cycle Curve Shaft Gas String...

2 Answers

I have a techumseh snow blower 5.5 engine. I need to know what type of fuel it needs. It says on the outside something about a 50:1 oil gas mix and lists some types of oils. Where can I get these oils,...


go to your hardware store and ask for some 2 cycle 50:1 oil, mix that with a gallon of gas and you're good to go. Before you mix, make sure that you read the oil container for it's recommendations! You can purchase a small container of oil that is all measured for 1 gallon of gas

Feb 10, 2010 | Garden

2 Answers

Need to know oil to gas mix ratio for Craftsman 32cc, 360 cfm, 170 mph blower vac? Can someone provide ratio?


40:1 is the standard mix. Go buy one of the little containers ( 3.2 ounces) of 2-cycle oil and mix it with a gallon of gas in an approved container (like a gas can). How you mix it is, pour some gas in the container...about 1/4 of the gallon, then pour in the oil, mix well, by shaking the can then add the remaining gasoline and PRESTO, you have a 40:1 mix!

Nov 08, 2009 | Garden

4 Answers

I guess he needs to know what kind of oil he needs also


you shouldn't need to mix oil with gas on a four cycle engine. this is for two strokes.

Aug 23, 2009 | Garden

2 Answers

I dont have the manual and Im not sure what ype of oil I should put on this chain saw. On the left The nob sais oil (which kind?) and on the right side it sais oil/gas mix (which kind?) what do i put on...


The Left knob needs chain oil. Available in most hardware stores. The right is gas mixed with 2 stroke motor oil. Usually a 50:1 mix. Ie. 50 parts gas to 1 part oil. 2 stroke oil comes with a built in measuring tool and directions printed on the bottle.

Jun 03, 2009 | Garden

Not finding what you are looking for?
Craftsman 25cc 2-Cycle Gas Blower/Vac Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

22486 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

rjivaro

Level 2 Expert

158 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...