Question about Phoenix Gold XS2300 Car Audio Amplifier

Open Question

What size fuse for pheonix gold xs2500 - Phoenix Gold XS2300 Car Audio Amplifier

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Mark Skinner

  • 79 Answers

SOURCE: Can i hook up a powered 12'sub to a Pheonix Gold

First I hope you remove the speaker wires from the speaker that come from the built in amplifire. You cannot hook the powered sub to the amp without doing that first. Then all you need to do is run speaker wire from the sub out of the box to the amp. In no way can you hook up any other part of the powered sub, but the sub itself, to the amp. If you know the wattage of the sub and the ohms then wire it to the amp correctly. Your phoenix amp will put out 125 watts x 2 at 4 ohms and 250 watts x 2 at 2 ohms and 500 watts x 1 at 4 ohms bridged. Remember, only the sub itself in the sub enclosure can be connected to the amp. Hope this helped you. Let me know if you need more help.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_b53a7494531bf96d

Posted on Aug 23, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pheonix gold xs 2200 stopped recieving power and I'm not sure what is wrong with the power


Start at your source...Battery fuse holder....Process of elimination. Remeber it could be a bad remote wire stopping it from turning on.

Apr 25, 2014 | Car Audio & Video

1 Answer

No sound from subs


You need power to the amp. If the light on the amp is not on then your amp is the problem. Get power to it.

Nov 10, 2013 | Phoenix Gold Xenon-400.1 Car Audio...

1 Answer

Henever i open my music player it updates and then shows no music files found. my model is 3110c. plz help me. thanks in advance


Actually I want to know the size of the memory card. Anyway Make back-up all the necessary data to mmc etc.and follow the procedure below.

First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 3110c file and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment / for detailsClick here1 . thanks for visiting fixya. Good luck.

Sep 04, 2011 | Nokia 3110 Cellular Phone

1 Answer

I cant open my music player....


What is the size of the memory card ? if it is more than 512mb this problem will occur again and again.Move all the data from phone to mmc.Restore it and try.if not solved follow the tricks

First download and install Pheonix. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link Nokia flash file or 6300 file and install it to C / programme files/pheonix..after finished this installation open pheonix clip_image002.gifInside the interface at the> left top <there you see "File" click there and choose "open file" and then select the approprait Product type i.e"which is written in the back banel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there when you click there you'll see three icon just select the "Firmware Update" again you'll see another interface.Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Botton and choose the code which is written in the back side of your phone.e.g CODE:0000000.if the same code does not found just take one.After this you can see "Dead phone USB flashing" click that box.Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" after this, a message will prompt you "press power botton" press it and wait untill the phone will Restart automaticlly in normal mode 10-15 minutes.If you cannot understand just make a Reply thanks for visiting fixya.Good luck

Jul 14, 2011 | Nokia 6300 Cellular Phone

1 Answer

Can i hook up a powered 12'sub to a Pheonix Gold xs2500 amp without blowing the speaker


First I hope you remove the speaker wires from the speaker that come from the built in amplifire. You cannot hook the powered sub to the amp without doing that first. Then all you need to do is run speaker wire from the sub out of the box to the amp. In no way can you hook up any other part of the powered sub, but the sub itself, to the amp. If you know the wattage of the sub and the ohms then wire it to the amp correctly. Your phoenix amp will put out 125 watts x 2 at 4 ohms and 250 watts x 2 at 2 ohms and 500 watts x 1 at 4 ohms bridged. Remember, only the sub itself in the sub enclosure can be connected to the amp. Hope this helped you. Let me know if you need more help.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_b53a7494531bf96d

Aug 23, 2009 | Phoenix Gold XS2300 Car Audio Amplifier

1 Answer

Moisture in amp while on, caused a small pop, then no sound outpu


check the fuse between the battery and the amp. (not the fuse in the back of the amp).
if that doesn't work then something on the inside of the amp is fried.

Jan 30, 2009 | Phoenix Gold Xenon-200.4 Car Audio...

1 Answer

Need to repair amp


there is something touching or shorting out..could be speaker wire inputs on the inside..if you have it crossed over you could have it backwords or you could have a short in your RCA's..

Dec 04, 2008 | Phoenix Gold XS2300 Car Audio Amplifier

1 Answer

Subs


I looked up that amp, it doesn't have a listing for 2ohms x1 but it has 2 ohms x 2 and its at 250watts. For this situation, I would recommend a different amp or different subs. Right now you are getting the most you can get out of your sub/amp combo, if you only have single voice coil subs. Which is common in the mtx preloaded boxes. Either you want an mono block amp stable at 2 ohms or 2 dual 4 ohm voice coil subs. If you got the subs you would wire the voice coils in series so you could get 8 ohms then the subs in parallel so you could get 4 ohms, which would be the best for that particular amp. Good luck.
-Andrew Hawkins

Aug 23, 2008 | Legend LA1490 - American Legacy Series 2 -...

1 Answer

Wondering why im blowing fuses


The most common reason for an amp (in good working order) to blow fuses is a speaker load that's impedance is too low. You may need to rewire your speakers.

Let me know if you have any other questions.

Aug 21, 2008 | Legend LA1490 - American Legacy Series 2 -...

Not finding what you are looking for?
Phoenix Gold XS2300 Car Audio Amplifier Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phoenix Gold Car Audio & Video Experts

Mark Skinner

Level 2 Expert

79 Answers

Jeffery Lewis
Jeffery Lewis

Level 3 Expert

329 Answers

colinjhought

Level 2 Expert

126 Answers

Are you a Phoenix Gold Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...