Question about Texas Instruments TI-84 Plus Calculator
On a calc that's work properly, in the 'y=' screen, none of the 'Plot#' things are highlighted. try pressing 'y=', and if you have a 'Plot#" in a black box, go up to it and press enter to un-highlight it.
either it will work as soon as you press 'graph',or you have another problem
Posted on Oct 19, 2008
TI-84 help and support
TURN STAT PLOT OFF by [2nd] + [y=] (STAT PLOT)
 or scrolling to option 4:STAT PLOT OFF
after I did this the function's graph popped up!!! (if yours does not, try to graph your equation again. DID IT WORK? if not, refer to the link above, appendix B to get help!
Posted on Oct 11, 2008
Go to stat plot (2nd y=) and make sure all the plots are off. This will allow you to graph again. Hope it helps
Posted on Jan 12, 2009
I thought it didnt work at first but then I pressed enter two times until it said done. It worked! Thank you.!!!
Posted on Sep 15, 2008
These suggestions got me in the ball park, but, where I failed was I had change the setting in zoom. Once I changes it back I was able to set the ymin to 0 or less. I had changed the zoom to #9zoomstat, changing it back to #6 zstandard solved my problem. Good Luck all
Posted on Dec 14, 2009
Invalid dim how do i get rid of that
Posted on Oct 15, 2008
This means you have an invalid command in your "stat plot" screen, even though you want to plot a normal graph. Go to your stat plot screen, and select option 4 (PlotsOff), Press Enter, and try to plot a normal graph again.
Posted on Feb 14, 2007
This message has several possible causes. In general, when you see this message you need to check carefully through what you've done to make sure that you used lists where you were supposed to, and nowhere else.
This message has several possible causes.
In general, when you see this message you need to check carefully through what you've done to make sure that you used lists where you were supposed to, and nowhere else.
Posted on Jan 10, 2011
Whenever I try to graph an equation, I get an message that says error INVALID DIM.
Posted on Oct 08, 2008
I LOVE YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
u are the best
marry me in the wedding of the century!!!
Posted on Sep 07, 2008
Do what he said, if you try to graph something with points than the calc will look forthe pionts even if there are none, thats were invaid dim comes from
Posted on Sep 18, 2007
You might want to check your stat plots and correct the lists used in them. The "INVALID DIM" will show up if you've configured the lists in the stat plots incorrectly. Remedying this is easy; just fix the lists used in your stat plot.
Example: If I had data in lists 1 and 2 but configured my stat plot so that it will use lists 1 and 3, I would receive this error.
Posted on Mar 13, 2009
I am getting an invalid dim error on sinreg data.... I checked my plot and they are off so when I checked stat edit I noticed I had nothing on there. What exactly am I supposed to plug in there. I entered random numbers and finally got data on sinreg but the data is wrong. So I really need to understand what exactly goes on stats? my graph 7sin(pi/6(x-4))+56...
Posted on Mar 08, 2014
I have to TI-84. Everytime I try to use the Solver Function an ERR: Archived message comes up.
Posted on Apr 08, 2010
It works for me if you just put in a poin.. 'stat' 'edit' and put a number that isnt on the graph.. unless u want it on the graph. Hop this helped : /
Posted on Mar 03, 2010
I had the same problem and was losing my mind trying to figure out this issue. suggestion worked like a charm. thanks alot
Posted on Sep 29, 2008
Men, u saved my math life
Posted on Sep 09, 2008
Posted on Sep 02, 2008
You rock! It worked.. thanks.
Posted on Aug 18, 2008
Do what solution 2 sais, it worked for me.
Posted on May 27, 2008
Posted on May 20, 2008
you saved me a whole buncha time on trying to figure it out
Posted on Dec 11, 2007
Worked like a charm!
Posted on Feb 15, 2008
Posted on Apr 14, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 04, 2012 | Texas Instruments TI-84 Plus Silver...
Jan 19, 2012 | Texas Instruments TI-84 Plus Silver...
Sep 09, 2011 | Texas Instruments TI-83 Plus Calculator
Dec 04, 2010 | Texas Instruments TI-83 Plus Calculator
Nov 03, 2010 | Texas Instruments TI-84 Plus Silver...
Oct 17, 2010 | Texas Instruments TI-84 Plus Calculator
May 07, 2010 | Texas Instruments TI-83 Plus Calculator
Jan 13, 2010 | Texas Instruments Office Equipment &...
Sep 27, 2009 | Texas Instruments TI-84 Plus Calculator
63,317 people viewed this question
Usually answered in minutes!