Question about HP LaserJet 1020 Printer

2 Answers

Large black strip printing problem

I have an hp laserjet 1000. never had a problem like that. It print form top to the bottom a wide large black strip, covering 75% of the surface.
I did a cleanup action, but did nothing. I did not change the cartridge lately, and have a hard time explaining why this is happening. Any ideas?

Posted by on

  • ddagenais Nov 30, 2008

    How do you change that drum? I thought it was part of the toner cartridge? Can it just be cleaned?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 4 Answers

Fix Printing Issues To An HP Laserjet 1000

Fix Printing Issues To An HP Laserjet 1000 by HP Technical Support Expertise Team. Dial 1-800-597-1052 HP Customer Support Number to fix HP Printer Issues and errors.

Steps to fix printing issues to an HP LaserJet 1000 are

Step 1: As per as HP Printer support service team, users will reported that RPM is able to print successfully to this printer with the help of HP Laserjet 1000 DOS driver.

Read more:
Call 1 800 597 1052 to Fix Printing Issues To An HP Laserjet 1000

Posted on Jun 18, 2018

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

There is issue with cartridge drum change that drum (It's in blue or green colour). the second option is change the cartridge.
Your issue will be fixed.

Posted on Nov 30, 2008

  • Asdf hsdf Nov 30, 2008

    You can not change it. go to any printer repair or cartridge refiling shop they can replace the drum with new one.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I copy there are black lines across the page. I changed out the cartridge for a new one, but it still makes the lines.


Lift the copy bed cover and locate the **** glass (it is about 1" wide and sits on the left of the large glass)

Use a microfiber cloth, and a bit of water, and remove the debris from this **** glass. Make sure it is clean, then clean the white bar on the underside of the top cover (It will sit on that **** glass)
take a blank piece of paper and copy it through the feeder, if you have lines on the page that prints, you need to look harder for a spec on that glass. a small dot will create a line on any document fed through the feeder. A dot on the large glass will print only the dot as the paper is not moving over it.

Jan 13, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

Jam inside top cover 13.05.00 also change fuser assembly


To remove paper jam. Just remove the toner cartridge and pullout jammed paper. If still coming paper jammed error message. Switch of the printer and the printer will roll over the paper jammed.

Changing of fuser drum is required if the print out came with the black strips. This happens when you print large volume of printing jobs.

Nov 26, 2010 | HP LaserJet P3005 Printer

2 Answers

Scanner error 5


Try this one open up the scanning lid, use a small allen wrench and pull the screw at the left side of the frame that holds a 1 inch wide by 12 inch long piece of glass. pot ur finger inside the housing and begin to roll the gear/rubber belt to move the scanner bulb assembly towards the left side as far as you can go. Then, turn the machine off and on.
If you are adept at printer repair, remove the right side cover, by removing the two screws in the hand hold area. pull the cover out at the bottom, using the handhold area, it will pop quite loudly. Once you get the cover off, you will find a large sheetmetal box with a row of connectors across the top of the circuit board. You do not need to remove the sheetmetal box to access the connector I am referring to. The four wire bundle I'm referring to has black, yellow, blue and red wires going to it. It's pretty much in the center of the row of connectors Be sure it is secure.
If the connector is securely inserted and no pinched wires are observed, the next most likely cause for this issue is a calibration stip for the scanner head inside of the scanner top. There are no spare parts for that level of repair. Opening the scanner top to repair it is likely to let in dust or debris and you won't find much that can be done if the calibration strip has moved or delaminated. The scanner top will need to be replaced. I believe the part number for the scanner top is Q3948-60191 unless it's been replaced with a newer part number.


that shud work if it doest contact hp....
good luck

Jul 12, 2009 | HP LaserJet 2820 Printer

1 Answer

Hp laserjet 1000 print full black page from computer also & test page also


if your laserjet print full black page. have you opened up the tube of laser into direct sun light ? take it to the dark place and clean the tube with tissue, but never to touch the tube with your hand. have a nice day.

Apr 02, 2009 | HP LaserJet 1000 Printer

1 Answer

Hp color laserjet 2600n ''black print down form its orignal place''


an allignment need to perform on printer with proper placement.

Nov 27, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Black strip over all printed papers


Check your Drum cartridge, if you see your strip replace it....If it's not the problem you may have a bad Fuser ....

Mar 25, 2008 | HP LaserJet 1100 Printer

Not finding what you are looking for?
HP LaserJet 1020 Printer Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...