Question about Cisco Linksys E1000 WirelessN Broadband Router Network Routers

1 Answer

Routor not connecting to modum - Cisco Linksys E1000 WirelessN Broadband Router Network Routers

Posted by on

  • mfinnell1
    mfinnell1 Jun 22, 2012

    are you expecting wireless connection to modem? Router needs to be wired to modem.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

That is connect.
You will need to connect the router to the modem with the Ethernet cable.

First connect the computer to the modem with the Ethernet cable. Make sure that you can access Internet without router.

Connect the computer to the Ethernet port 1 and modem to the Internet port on Linksys router.
Open the setup page of the router.
Change the Internet connection settings according to the Internet service provider.
Create a wireless network and then connect your computer and other devices to the wireless network.

Read more about How to setup Linksys router.

Posted on Jun 23, 2012

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the Zyxel ES-105A connected in the following way: LAN cable from modum connected to port 1, LAN cable from port 2 connected to my laptop which I use to log in to my modum and LAN cable from port 3...


If your modem is not also a router you can only connect one device to it. You should have a router instead of a switch. Otherwise check the settings on your modem to be sure the ports are open that are needed for the Sling Catcher.

Apr 04, 2011 | Zyxel ES-105A (ES105A)

1 Answer

Ps3 won't obtain ip address(no internet connection)


some networks tend to be available but the moment you try to connect,it disappears.maybe its just one of those networks that is really unstable.

Mar 08, 2010 | Sony PlayStation® 3 (60 GB) Console

1 Answer

How to connect my dell dial up modum to lap top


Your dial up modem needs to be ab external modem.
You can not use an internal modem from another machine unless you create a network and share your connection.
If you have an external modem then connect the modem to the available port on your laptop and let plug and play take over. If you do not have a port on your laptop and you modem has a serial port you will need a usb to serial adapter which you can get at Radio Shack.

Jan 09, 2010 | Ultra Computers & Internet

1 Answer

Cnnecting to cable modum


To access your router you should goto http://192.168.0.1 - It should explain in the manual.

You may have to set the router in Cable Modem mode as it may be in DSL mode now.

I hope this may help.

ALSO! There should be a little hole in the back that you can put the tip of a pen into to press a button and it will reset the router back to factor defaults. Default settings would be cable modem mode. Be sure to have the router powered on and press the button down for 10 secs and notice the lights on the router should flash. After that power down the router, by unplugging the power and the plug it back in. It should be set back to factory defaults.

Oct 23, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

2wire routor


you need to have DSL service at your house. If you do, reset your modem. tambien it could be that your dsl filters are not installed.

Do any lights in the front light up red?

Aug 23, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Wireless security into modum


try to set up a secure network using wpa2 with a long passphrase. also turn off the wireless signal when you're not using it.

Jul 07, 2008 | Computers & Internet

1 Answer

Loose connection


  1. Update the Firmware on your router.
  2. When you lose internet, look on your modem and make sure that no lights have gone out. (i.e. Cable) If this one goes out, it is your provider.

Jun 03, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Help error!!


do you have a routor try doing the easy way and get close to a routor and make the stuff automaticand make the psp find the number by it self and then it will work and there you go

Oct 03, 2007 | Sony PlayStation Portable (PSP) Console

Not finding what you are looking for?
Cisco Linksys E1000 WirelessN Broadband Router Network Routers Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...