Question about Pentair EasyTouch 8 System Pool and Spa w/IC60P Cell

1 Answer

Pentair Easytouch 8 loses low voltage power to contol panel

The other day my pump stopped. Went out to the control panel and the LCD screen was blank. I flipped the breaker off to the control panel and then back on. LCD screen came back on for about 15 seconds and then slowly faded out. I think the XFR must be bad. Could it be something else?

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Pentair Master
  • 10,744 Answers

If while it fades check voltage from transformer if ok bad control board if fades bad transformer

Posted on Feb 18, 2018


2 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


John Bishop

  • 368 Answers

SOURCE: My Pentair easy touch control

I would call the Pentair technical support at 800-693-0971 number and they should be able help determine what to do next.

Pease let me know how this works out. Thank you.

Posted on Sep 04, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Who repair pool with easy touch in toms rivernj

Search Pentair on line or check the Toms River business directory.

Jul 06, 2014 | Pentair EasyTouch 8 Pool and Spa Control...

1 Answer

Can you hook up a jandy 4-button spaside remote to the pentair easytouch controller?

I've installed dozens of Pentair ez-touches. Call Pentair and ask them. I don't think you can, but I could be wrong. Plus, in my opinion, Jandy isn't a very good brand anyway. Just get the one that is supposed to go with the ez touch. It's easy to run and program and you already know it's going to work because it was made for the ez touch system. You'll save yourself a lot of headaches by not trying to save a couple of bucks.

Feb 28, 2014 | Pentair Easy Touch Indoor Control Panel...

1 Answer

Went away on vacation, came back basket clogged of leaves, pump has no power and wont start

contact pentair customer support......after first checking breaker for pump,,,,....make sure power is on and at oump with voltgage light up pencil checker.....checks sockets or any device for line voltage just by placing it on power line....get it at lowes.....I believe pump has a rest but check with customer support or your product troubleshooting guide

Nov 27, 2010 | Pentair IntelliFlo VS-3050 & VS+SVRS...

1 Answer

Pentair pool pump vs 3050

These pumps should not be hooked into an intermatic mechanical timer. It should always have power supplied to it, meaning it should be installed to the line side of the power supply. Scheduling is done either in pump itself or thru an external controller such as a suntouch or easytouch controller, etc. When you have it wired into a timer like intermatic, power is interupted to the pump every day when the timer setting is for off. It is very hard on the drive of this pump, it does not like it, and will shorten the life of the drive. The pump was designed to always have power supplied to it, even when it is not scheduled to run. This may be the problem you are experiencing. HTH

Jun 02, 2009 | Pentair IntelliFlo VS+SVRS Pump 230v -...

1 Answer

Pump works in spa mode, but doesn't work in pool mode. Why?

We need more info. Which control system is it? Suntouch, easytouch, intellitouch.......? It sounds like a programming problem in the controller.

May 25, 2009 | Pentair 3hp Whisperflo Pool Pump In -...

1 Answer

Programming the intellibrite light

Are you on an Easytouch? If so, make sure the AUX circuit the light is on is actually assigned to an IntelliBrite. The system has logic built in to access the lights features as opposed to just knowing it is a light.

Dec 19, 2008 | Pentair Easy Touch Indoor Control Panel...

Not finding what you are looking for?
Pentair EasyTouch 8 System Pool and Spa w/IC60P Cell Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentair Pool & Spa Experts

Bill Jordan

Level 2 Expert

375 Answers

Brad Brown

Level 3 Expert

18157 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Pentair Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides