Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cy

Loud banging during spin cycle model 110.26842692

Posted by on

  • varge Dec 14, 2008

    top load washer

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 373 Answers

Unless your front loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Posted on Dec 14, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud banging noise during spin cycle


If you balanced the machine, the only other problem could be the load itself. Either the load is too great or if washing a single item its falling to one side, tilting the drum and when spinning it will thump. Try even lodes.

Jan 31, 2018 | Washing Machines

1 Answer

Loud banging noise Kenmore model # 41744102301


Hello,washing machine is mounted on two supports, if it is damaged first which is where the engine so both need to be replaced because they wear out. If you're just a little handy so you know it himself .Ak you order parts so precisely that type because they are different .

May 02, 2013 | Washing Machines

1 Answer

Kenmore 43142 front loader bangs during spin cycle any ideas on what the problem might be?


always check the load to the drum is not to heavy on one side, this could cause it to bang.

Aug 25, 2012 | Kenmore Washing Machines

1 Answer

Frigidare front load washer has loud banging on spin cycle. After much work we reallized one shock was broken of which we repaced both now it still making the loud banging shaking motion. Also the washer...


Thanks for choosing FixYa and welcome. Since the suspension is ok and it is level, check your drive motor and spin bearing. Usually, these are the trouble parts when loud noises are associated with the spinning cycle. Your drive motor controls the spinning. Since the noise is during spinning, that is probably where your problem lies.

Apr 29, 2011 | Frigidaire GLTF1670A Front Load Washer

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

1 Answer

FWT449GFS2 making loud banging noises during final spin cycle


lxr6232eqo making loud banging noises during final spin cycle

Aug 31, 2009 | Frigidaire Washing Machines

1 Answer

Washer spin cycle extreme vibration and loud bang when it stops


check the vibration damper rods for breakage - especially the mounts.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 17, 2009 | Kenmore Washing Machines

1 Answer

Loud Noise during spin cycle


drum bearings are gone,it would cost too much to repair,the drum shaft would to be repalced as well.Sorry

Dec 15, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

2,342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...