Question about Air Tools & Compressors

1 Answer

Husky 60 gallon compressor switch from 220 to 110

I have a husky 60 gallon, its wired for 220 and i would like to switch it to 110 is this possible? if so how? any good links or pics???

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

Try here, very good for asking problems http://www.about-air-compressors.com/husky-air-compressors.html

Posted on Oct 01, 2012

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
louislevel_2

Louis Magpantay

  • 374 Answers

SOURCE: Wiring a Husky brand compressor from Home Depot.

hi! there,
you can use terminal connector like on figures83ba8af.jpg joint connector or lug connector
this are more convenient to use
easy to install and has insulated for connection.


b8c03c8.jpg
insulated ring terminal connector
this is also good for connector more safe for circuit breaker suipply.

go to the nearest hardware or mall

Posted on Apr 20, 2009

Anonymous

  • 5 Answers

SOURCE: need wiring diagram for a kobalt 60 gallon 3.7 hp

I have a Kobalt 60 Gal 3.7 hp air compressor. Send me your email address and I'll make sure you get your schematic. Hope this helps! MichaelGG@health.ok.gov

Posted on Jul 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sears 2 HP 20 gallon air compressor, model number 106.170641, currently wired for 220. Can it be converted to 110 ?


it is a 5 hp motor and 15 amps 230 , rewiring it would require 120 vac breaker rated at 60 amps. The power would have to upgraded to #10 AW there is is no receptacle available, so the answered is no. . the the answer upgrade to 220 Vac

Aug 20, 2018 | HP Air Tools & Compressors

1 Answer

I have a husky model 947265. And it won't shut off when I turn it off manually I have to wait till all the air is out before it turns back on


Free Husky Air Compressor User Manuals ' ManualsOnline ...

powertool.manualsonline.com > ... > Husky > Power Tools Husky
Husky Air Compressor Operator's Manual ... Plumbing Quincy Single-Stage Air Compressor - 3.5 HP, 220 Volt, 60-Gallon Vertical Tank, Model Q13160VQ.

Sep 04, 2015 | Air Tools & Compressors

1 Answer

I need to convert mu Puma PPH 30-10 air compressor from 220 Volt to 110 Volt wiring, but I do not have the owners manual or a wiring diagram for it. The Motor is a GE


If this is a 3HP I don't think you can switch it. However there is usually a wiring diagram under the square box on the side of the motor.

Sep 29, 2013 | Puma 3-HP 60-Gallon Belt Drive...

1 Answer

How i can switch husky compressor 110 for 220 ? Txs.


If the motor is a dual voltage motor just connect the wires according to the label on the motor. Otherwise you'll need to get a 220 volt motor that turns the same direction as the one on it now.

Sep 27, 2013 | Air Tools & Compressors

1 Answer

How to adjust cut in pressure on husky 60 gallon


what is the pressure switch model number, most of them have a nut with a spring under them, just turn the nut to adjust the pressure

Oct 21, 2012 | Husky Electric Air Compressor: 60-Gallon...

1 Answer

Comp can be wired 110 or 220 cant remember how to switch it?


Usually there is some type of labelled switch where the wire terminals are. Of course you will have to remove one of the hot leads. Hope this helps. You didn't say what type of compressor you have. Good luck!

Mar 14, 2010 | Air Tools & Compressors

1 Answer

Have a husky 19 gal 1.5hp it kicks on when first start to work and when it builds up air and i use it and when it wants to kick back on it wont i have to wait till it cools down.


Is there an option for you to run this compressor on 220 volts vs 110 volts??? If so, you may want to convert it by following the re-wire instructions on the motor or wire access plate/instuction book. The reason your compressor won't fire up again after building pressure is the head pressure is to great at restart and 110 household current is not enough to give the power needed to turn the piston. You'll need to replace the plug and have someone run a 220 volt circuit once the conversion is completed.

Jan 18, 2010 | Campbell Hausfeld 5 Peak / 1.7 Running HP,...

1 Answer

Husky 25 gallon air compressor turns on and off Y6020-WK


Pressure switch setting is off. Readjust to Mfg. spec. (on @ 60/off @ 8o...)

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Sep 03, 2009 | Air Tools & Compressors

1 Answer

I have a Coalman Powermate 6.5 Hp 60 gal. compressor model C650C600VIB103. I want to know to connect the elect. cord correctly.


Does the unit have a starter or just a pressure switch , if just a pressure switch it should be marked with line and motor , the wires on the motor should go to the motor terminal and the line terminals are the power supply , if the unit is 110 volts make sure you put the wires on by color , the white wire goes to the motors white wire and the black to the motors black wire , if this is 220 volts it does not matter which wire connects just put the two black wires on the line terminals. One wire per terminals please.

Jul 17, 2009 | Coleman Powermate 60 Gallon Air Compressor

1 Answer

Brand new Husky 60 gal 3.2 hp runs to 30 psi and then starts bogging down and running and bogging down ect. No more pressure over 30psi and i can hear on and off clicking of the motor. Did I wire it wrong...


SOUNDS LIKE IT WIRED FOR 220VOLTS AND YOU HAVE IT PLUGGED INTO 110VOLTS. IF THE MOTOR SAYS 110/220 THEN FOLLOW THE DIAGRAM FOR LOW OR HIGH VOLTAGE. MAKE SURE CORD IS ADEQUATE SIZE. HOPE THIS HELPS.

Apr 25, 2009 | Campbell Hausfeld Air Tools & Compressors

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1420 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

207 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...