Question about Casio KL-60 label maker

Open Question

How do you print 2 lines of information - Casio KL-60 label maker

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY LEXMARK 4505 LEAVES 3-4 BLACK BLOTCHES ON THE EDGE OF EACH PAPER IT PRINTS, TRIED CLEANING THE ROLLERS TO NO AVAIL, ANY SUGESTIONS


ADJUST THE COLOR AND PRINT SPEED You may need to adjust the color and print speed. CHECK THE LEVEL OF INK IN THE PRINT CARTRIDGES 1 From the Finder desktop, double-click the Lexmark X5400 Series folder. 2 Double-click the Lexmark X5400 Series Utility icon. 3 From the Maintenance tab, check the ink levels of the cartridges. If an exclamation point (!) appears on a cartridge, the ink level is low. Install a new cartridge. Improving print quality These are possible solutions. Try one or more of the following: CHECK PAPER • Use the appropriate paper for the document. If you are printing photos or other high-quality images, for best results use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper. Do not use Lexmark Premium Photo Paper. Your print cartridges are not compatible with this type of paper. • Use a paper that is a heavier weight or bright white. CHECK PRINT CARTRIDGES If the document still does not have the print quality you want, follow these steps: 1 Align the print cartridges. For more information, see "Aligning print cartridges" on page. If print quality has not improved, continue to step 2. 2 Clean the print cartridge nozzles. For more information, see "Cleaning the print cartridge nozzles" . If print quality has not improved, continue to step 3. 3 Remove and reinsert the print cartridges. For more information, see "Removing a used print cartridge" on and "Installing print cartridges" . If print quality has not improved, continue to step 4. 4 Wipe the print nozzles and contacts. For more information, see "Wiping the print cartridge nozzles and contacts". If print quality is still not satisfactory, replace the print cartridges. For more information, see "Ordering print cartridges". CHECK PRINT CARTRIDGES If the document still does not have the print quality you want, follow these steps: 1 Align the print cartridges. For more information, see "Aligning print cartridges" on page 124. If print quality has not improved, continue to step 2. 2 Clean the print cartridge nozzles. For more information, see "Cleaning the print cartridge nozzles" . If print quality has not improved, continue to step 3. 3 Remove and reinsert the print cartridges. For more information, see "Removing a used print cartridge" and "Installing print cartridges" If print quality has not improved, continue to step 4. 4 Wipe the print nozzles and contacts. For more information, see "Wiping the print cartridge nozzles and contacts"
If print quality is still not satisfactory, replace the print cartridges. For more information, see "Ordering print

Nov 10, 2010 | Lexmark X5495 All-in-One &USB...

1 Answer

Hp laserjet 1018 - how do I find out how many pages have been printed in the printer's lifetime?


Hold the 2 buttons on the operation panel down for a few seconds until the light begin to flash. Then release them. This will print a configuration page which will contail a line with the total pages printed information.

Jan 10, 2010 | HP LaserJet 1018 Printer

1 Answer

What button do I press to generate a Fax report - this is not always generated automatically.


Sounds like your Fax Options are set to print on error only. If you want to have both confirmations and error pages do the following:
1 Press Menu until “Fax Setup” appears on the top line of the display. Press Enter.
2 Use the scroll button to find MSG Confirm. Press enter.
3 It may be selected to On-Err. Use the scroll arrow buttons to get to On. Press Enter.
4 To return to Standby mode, press Stop/Clear.
This should make your fax print out a confirmation on a successful or failure transmit of your fax.
If you want to print out the last few sent or receive faxes:
Printing a Report
1 Press Menu until “Reports” appears on the top line of the display.
2 Press the scroll arrow buttons to display the report or list you want to print on the bottom line.
•Phone Book: Phonebook list •Sent Report: Sent fax report •RCV Report: Received fax report •System Data: System data list •Scheduled Jobs: Scheduled job information •MSG Confirm: Message confirmation •Junk Fax List: Junk fax number list
3 Press Enter. The selected information prints out.
You can find your manual in English by clicking here.
Good luck!
------------------------------------------------------ Please rate this post if it helps you! :)

Dec 08, 2009 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Lines in the printing


Join the Yahoo Group for Alps printers. There is a lot of information there. Have you cleaned the print head? Refer to the Users Guide for how to do it. Lines in the printer output can indicate a bad printer head.

Mar 11, 2009 | Alps MD 1000 Thermal Printer

1 Answer

My Canon S300 printer is flashing green, then 8 oranges flashes (waste tank almost full). What exactly do I have to do to resolve the problem?


This procedure will print out information about the EPROM:

2 EEPROM information printing
a) While the printer is powered off, hold down the RESUME button, then press the POWER button.
b) When the POWER LED lights up, hold down the POWER button, and press the RESUME button twice.
c) Release both the POWER and RESUME buttons, and the service mode is entered.

<< Note: the printer will cycle through and then the power light will stay on steady>>

d) Press the RESUME button twice.
e) Press the POWER button.
==>EEPROM information printing pattern will be printed.

If a report is printed, then you know you have done the steps correctly. The top line of the report will look like this:

S300 P=V 1.00 Destination=000.0 D=095.5 Page=05716 CH=0000 BK=(000) C=(-01)

The number after "D=" is the waste tank counter. To reset this to zero, repeat the steps above except for step d) you will press the RESUME button four times. (Also, you may have to press the POWER button in step e) twice).

Repeat the steps to print the information and the counter number should be zero. Mine changed from the above line to this:

S300 P=V 1.00 Destination=000.0 D=000.0 Page=05717 CH=0001 BK=(000) C=(-01)

Nov 16, 2008 | Office Equipment & Supplies

1 Answer

Counter info print out


Hi Beadworker,

This information can be found by printing a configuration page from your printer. Follow these steps to print out a configuration page.

Printing a Configuration Page
You can print a configuration page from the printer’s control
panel. Use the configuration page to view the current settings,
to help troubleshoot problems, or to verify the installation of
optional accessories, such as memory or an optional tray.
To print a configuration page:
1 In ready mode, press the Menu button on the control
panel until you see “Information” on the bottom line of the
display.
2 Press the Enter button to access the menu.
3 Press the Enter button when “Configuration” displays
on the bottom line.
A configuration page prints out.

Oct 11, 2008 | Samsung CLP-510 Laser Printer

1 Answer

Print out counter info


Hi Beadworker,

This information can be found by printing a configuration page from your printer. Follow these steps to print out a configuration page.

Printing a Configuration Page
You can print a configuration page from the printer’s control
panel. Use the configuration page to view the current settings,
to help troubleshoot problems, or to verify the installation of
optional accessories, such as memory or an optional tray.
To print a configuration page:
1 In ready mode, press the Menu button on the control
panel until you see “Information” on the bottom line of the
display.
2 Press the Enter button to access the menu.
3 Press the Enter button when “Configuration” displays
on the bottom line.
A configuration page prints out.

Oct 11, 2008 | Samsung CLP-510 Laser Printer

4 Answers

Printing


No black line while you scan, but it only appears while you are printing?

Mar 18, 2008 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Streaky print out from canon Pixma mp830 all in one


I just bought a PIXMA iP3500. The 1st 2 photos I printed had veritcal White lines. I did a Nozzle Check and Alligned the Print head after the 1st photo printed. The 2nd still had the lines. Then I changed brands of Glossy Photo Paper and tried a 3rd time. This time I noticed that it printed much slower and it turned out just fine. Information says that you should have the settings at "high" not "standard". Double check that this hasn't inadvertently changed back to Standard. Gator

Dec 07, 2007 | Canon PIXMA MP830 All-In-One InkJet...

2 Answers

I have blank lines through my printouts


Run the cleaning cycle. If that doesn't work, try to use an alcohol soaked swab on the print head. Some of the jets are clogged.

Oct 27, 2007 | Canon PIXMA MP130 All-In-One InkJet...

Not finding what you are looking for?
Casio KL-60 label maker Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Casio Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...