Question about 2-Way Remote Starter
I HAVE A COOL START REMOTE # M65TX605 THAT NEEDS TO BE REPROGRAMMED. IT WAS WORKING A COUPLE OF DAYS AGO BUT WHEN I TOOK IT OUT MY POCKET THE LIGHT WAS FLASHING. NO BUTTONS WERE PUSHED SO I BELIEVE IT ENTERED INTO THE PROGRAMMING PHASE AND I DID NOT GET THAT INFO FROM THE INSTALL DEALER.
From http://www.crimestopper.com/techweb/InstructionBooks/RemoteStart/rs1300dp_1304dp_a_ops.pdf Note: All transmitter codes must be learned at time of programming!! The unit will learns up to 4 different transmitter codes. 1. Open Hood (If no hood pin installed with your system, then you must ground the Gray Hood pin wire). 2. Turn key to the ON position. (Pink wire must be connected.) 3. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times. 4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a 2nd code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3rd code and so on. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key off and close hood. See diagram below.
Posted on Dec 23, 2008
So this morning i tried to remote start my truck the truck turned on and it stayed on for 5 sec turned off again 3 sec later it turned on again for 5 sec and turned off agin doin the same problem over and over any ideas what this problem can be>? its the cool start idk which model # i bought the truck with it
Posted on Nov 18, 2011
My remote was droped the buttons on the side will cause the light to come on but the rest of the buttons wont do anything at all how can i fix this
Posted on Dec 31, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 04, 2018 | GMC Cars & Trucks
Apr 06, 2014 | 4103LX 4Button Remote Start System with...
Jul 26, 2013 | Cars & Trucks
The flashing blue light shows that the TV is receiving I.R. from the remote but doesn't mean that the signal being received is recognized by the Samsung. If you have a "universal" remote then your TV code may need to be re-entered/reprogrammed...changing batteries in a "universal" will usually require it to be reprogrammed. Also...because of the remotes construction (rubber membranes with carbon dots that short across PC traces) I've seen certain buttons stop working altogether.
Also...because of the remotes construction (rubber membranes with carbon dots that short across PC traces) I've seen certain buttons stop working altogether.
Nov 05, 2010 | Samsung TV Remote Control
Jun 04, 2009 | 2001 Volvo S60
May 04, 2009 | Toshiba Televison & Video
Jan 20, 2009 | Chamberlain 950CB Remote Control
Oct 25, 2008 | Mazda MAZDA6 Cars & Trucks
18,017 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 3 Expert
Step 2: Please assign your manual to a product: