Question about Hansgrohe - Lavatory Faucet - Centerset - Retroaktiv Tango - 06430000

1 Answer

Stiff cold water handle bathroom Hansgrohe

The handle on my Hansgrohe has become very stif. its a bathroom faucet. I do not know the style. The handle has no set screw to remove the handle. Is there a pressure issues with these faucets, and if so how do i fix it?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 72 Answers

If the handle is hard to turn it is most commonly caused by water deposits in the handle or in the cartridge below. I would try removing the handle to ensure it turns freely when not installed on the faucet. If not you can clean it with CLR to remove the water deposits that are making it difficult to turn. If the handle turns freely when not installed you will need to remove the cartridge and inspect it to ensure it is not broken or damaged in any way. There could be debris in the cartrige that has either made it hard to turn or broken the ceramic disks. Our handles are easily removed by turning the bell shaped ecutcheon below the lever or cross handle. There are not set screws that hold them on. If you need further information feel free to call me at 1-800-334-0455. Press 2 for tech and ask for David Scarborough.

Posted on Aug 08, 2012

Ad

4 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Billy R. Nicks

  • 198 Answers

SOURCE: hansgrohe bathroom faucet handle is loose. how do

remove the cover in the center of the handle and you should see if it is a phillips screw driver or some other fastener type.

Posted on Oct 20, 2010

Anonymous

  • 68 Answers

SOURCE: cross handle hansgrohe faucet I can't remove top piece

Use a rubber glove between the strap wrench and the fixture. It is a little monkey business but keeps the strap from slipping.

Phil

Posted on Dec 17, 2008

woobie dog

woobie dog

  • 1273 Answers

SOURCE: hansgrohe single handle bathroom faucet handle is

Look under the lever for an allen screw.

--W/D--

Posted on Jan 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the grub screw that has to be removed as I can't find it?


plumbing - How do I remove a stuck faucet/tap cover ...

diy.stackexchange.com/questions/.../how-do-i-remove-a-stuck-faucet-tap...
Apr 18, 2011 - Anybody can ask a question; Anybody can answer; The best ... There are total six faucets in a bathroom, two made into a bathroom basin ... The other possibility is that there's a small plastic "decorative" cap covering the screw.

How-To: Replace A Shower Faucet Cartridge ' Toolmonger

toolmonger.com/2009/12/01/how-to-replace-a-shower-faucet-cartridge/
Dec 1, 2009 - In many modern shower faucets like Delta and Moen (which is what I have) .... About a year ago, one of the bathtub faucets in my other bathroom jammedopen. .... the exact faucet I have in my shower, so you answered my first question, ...I can tighten and loosen the screw but the handle just won't come off!

Problem Removing Handle Off Of Delta Monitor 1400 Series ...

www.diychatroom.com/.../problem-removing-handle-off-delta-monitor-...

May 20, 2009 - 15 posts - ‎12 authors
... from a Delta Monitor 1400 series tub/shower single handle faucet. ... sorry for the REALLY sxxxxx question. which way to turn (loosen) the set screw. ... only suggestions i have on the issue. when a setscrew will not back off i ...

REMOVAL OF STUCK CURVED FAUCET HANDLE WITH HEX SCREW ' DIY Forums

www.diyforums.net/removal-of-stuck-curved-faucet-handle-with-hex-sc...

Feb 03, 2016 | Home

1 Answer

How do you remove the Metris S wideset faucet handle?


To remove the handle simply rotate the escutcheon counter clockwise and it will unthread from the fixation on top of the counter. Then the handle will lift off as one unit. You can clean them with CLR to clear up water deposits. If you need further instructions feel free to contact me Hansgrohe Tech 1-800-334-0455 press 2 for Technical and ask for David Scarborough. I'll be happy to help.

Apr 08, 2013 | Hansgrohe 31063821 Brushed Nickel Metris S...

1 Answer

Hansgrohe axor faucet jammed


On this model the escutcheons will turn counter clockwise and the whole handle will lift off as one unit. In some cases water deposits can cause the handle to stick and you may need to use CLR to lossen the deposits. In some other cases installers will put the handle on first and then tighten the valve to the deck. This causes the handle to be too tight to the deck and can strip the handle fixation. Try loosening the the valve set below the handle and see if the handle is easier to remove once the valve is loosened. If you need further help feel free to contact me at Hansgrohe Technical Services at 1-800-334-0455. Press 2 for Tech and ask for David Scarborough.

Sep 16, 2012 | Hansgrohe 31063001 Metris S Widespread...

1 Answer

How to replace hansgrohe M2 cartridge


First you will need to tighten the set screw all the way back in. The use your 4mm hex wrench to turn the screw 4 complete turns counter clockwise. Then remove your hex wrench and the handle should come off. There will be a dome shaped cover with blue and red indicator marks. This will simply pull off the cartridge nut. It is held on by o-ring tension only. Once removed you will see the large hex head of the cartridge retainer nut. Loosen this nut and the nut and cartridge will come out of the faucet. Don't be alarmed if your new cartridge is smaller than your old one. There has been a design change in the cartridge so it will fit smaller bodied faucets but will still replace the older thicker cartidge. If you need any further information feel free to give me a call at Hansgrohe. 1-800-334-0455. Press 2 for tech and ask for David Scarborough. I'd be glad to help.

Aug 04, 2012 | Hansgrohe Plumbing

1 Answer

How do you take a Hansgrohe 6566000 metro pull out spray faucet apart?


There is a hole in the handle for the 4mm hex wrench to fit into. You will need to put the handle up in the "on" position. Then the hole will line up with the set screw and your wrench can push straight into the set screw. Rotate the set screw counter clokwise 4 complete turns. Then remove the hex wrench and the handle will lift off the faucet.

Jul 30, 2012 | Plumbing

1 Answer

How do I fix a leaking hansgrohe solaris bathroom faucet?


If this is a widespread faucet you will need to turn the bell shaped portion of the handle counter clockwise to remove the handle as one unit. Then you will see the hex nut of the cartridge that will unscrew counter clockwise to remove. If this is a single hole unit you will need to loosen the set screw on the handle to remove it and then remove a cover ring to access the cartridge nut. If you need any further assistance feel free to call me at Hansgrohe. 1-800-334-0455 press 2 for Tech and ask for David Scarborough. I'll be happy to help.

May 25, 2012 | Hansgrohe Plumbing

1 Answer

Hansgrohe bathroom faucet handle is loose. how do I tighten?


remove the cover in the center of the handle and you should see if it is a phillips screw driver or some other fastener type.

Oct 20, 2010 | Hansgrohe Plumbing

1 Answer

I have two leaking bathroom faucets. Hansgrohe 06042. I replaced both faucet valves from Hans part no. 94009000. They BOTH still leak steadily. They worked flawlessly for two years.


where are they leaking from?
if they're leaking from underneath, repace the suply lines [between the valve and faucet]. if if from the faucet itself replace your cartrage[s].

Aug 18, 2009 | Hansgrohe 06042 Tango Widespread Bathroom...

1 Answer

Bathroom Faucet Handle Fell Off


There is a small allen screw in the base of the handle- the part the stem screws into to turn the water to the on position. If you have lost the one for your handle call moen at 1-800-289-6636 in the US. Their hours are Mon-Fri 8-8 EST and Sat 8-18:30 or follow this link MOEN. In Canada 1-800-465-6130 and hours are Mon-Fri 7:30-17:00 EST.

Mar 11, 2009 | Moen Bathroom Sink Faucet - 4-inch...

Not finding what you are looking for?
Hansgrohe - Lavatory Faucet - Centerset - Retroaktiv Tango - 06430000 Logo

3,540 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hansgrohe Plumbing Experts

Paul Carew

Level 3 Expert

3489 Answers

ray gallant

Level 3 Expert

66468 Answers

Carl Rock
Carl Rock

Level 3 Expert

2011 Answers

Are you a Hansgrohe Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...