Question about JVC KD-S640 CD Player

2 Answers

JVC KD-S640 pinout needed

I have a JVC KD-S640 CD player I would like to use but the rear connector is missing and there is no pinout info on the unit, my thought was to solder wires directly to the pins making my own pigtail, anybody have the pinout info they could share? thanx

Posted by on

  • Gene Rogers Apr 01, 2007

    thanx, good solutions

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No black wire on jvc kds640 wiring harness

Posted on Aug 19, 2019

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 135 Answers

For ten bucks, you can buy a new connector: http://www.jvcservice.com/store/ProductDetail.asp?part=JV16-0001A To figure out how to wire it: http://books.jvcservice.com/download/256614688/28879.pdf Page 25 describes the color of the wiring in the harness.

Posted on Mar 29, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CD's are being ejected without play (JVC KD-s640)


Take a torch and see if there are any foreign objects in the loading compartment. Children are know to insert for coins to just about anything they can squeeze through the ****.
Then try removing the system from the dash and open the top lid. see if you can clean the lens from a small cutout on the loading mechanism using a cotton ear bud. Do it in good light because the lens ( looks like a fish eye ) can oly been seen at an angle through the cutout.

Mar 08, 2011 | JVC KD-S640 CD Player

1 Answer

I need to know how to troubleshoot an err4 code and what it means


hold the reset button with a pen tip for 20 secons and it should be back to normal

Dec 26, 2009 | JVC KD-S640 CD Player

1 Answer

I want to wire the kd-s640 to my boat. I need to know what wire by color (except black ground) goes where. Thanks. dave.dunklee@gmail.com


Usually it's....

black = ground
red = switched battery power
yellow = constant batery power (for clock...etc)
orange = illumination
blue = amplifier turn on or accessory (electric antenna, amps etc)

green/white/purple/grey are speaker wires.

Jun 12, 2009 | JVC KD-S640 CD Player

1 Answer

Connecting iPod to JVC KD-LH810!?!


Hi, KD-LH810 has no option for external input. Refer to the picture attached. It is only front and rear line outputs. Don't get disappointed. Buy the accessory cable KS-U100 and you are set. This info is from the installation manual.
c686a9e.jpg

Mar 16, 2009 | JVC KD-LH810 CD Player

1 Answer

Just stopped playing


Change the audio amplifier IC maybe are damaged

Oct 30, 2008 | JVC KD-S640 CD Player

1 Answer

Control Panel Replacement for KD-S640


Here is the DIRECT link to buy the parts you need. Copy and paste this link to your browser.

http://www.pacparts.com/model.cfm?CFID=1284915&CFTOKEN=48698629&mfg=JVC&model_id=KDS640&row_start=1&src_model_id=KD-S640&action=list_part

May 30, 2008 | JVC KD-S640 CD Player

1 Answer

Rejecting cd's


Press the Q/I/ATT and the "sel" button at the same time with the unit off for more than 2 seconds. This will reset the entire unit (you'll have to re-program the memory stations for FM & AM). The disc should eject automatically.

Hope that helps!

Dec 03, 2007 | JVC KD-S640 CD Player

1 Answer

Help


Hi, Normally, your JVC Car Stereo will not allow direct connection to an Apple iPod. However, there are several aftermarket interface adaptor that will allow you to do so: 1. Connect the iPod to a JVC KS-PD100 which in turn is connected to the CD changer jack of the KD-G720 (rear of the unit). Set the stereo to CD changer external input setting and you're ready to go; 2. Connect the iPod to an FM Transmitter such as the Griffin iTrip (w/ Dock connector) which in turn will broadcast the IPod music as an FM signal. Operating the KD-G720 on FM radio setting will receive the IPod's broadcast music. Hope this be of some help to you. Pls post again how things turn up. Good luck and kind regards.

Aug 01, 2007 | JVC KD-G720 CD Player

2 Answers

Error 10 message on display screen


Same issue but pressing Power and SEL would not reset unit. Found solution. Once again disconnected the car battery. Removed the face unit from the radio base and then reconnected the battery. Replacing the face unit AFTER the power was re-established solved the issue. (Probably pulling the radio fuse rather than toying with the battery connection would have done the same thing.)

Mar 09, 2007 | JVC KD-S640 CD Player

Not finding what you are looking for?
JVC KD-S640 CD Player Logo

Related Topics:

1,383 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...