Question about DISH Network ViP 211 DTV Receiver

1 Answer

How to pair remote with receiver - DISH Network ViP 211 DTV Receiver

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 263 Answers

Brittany Whaley,

To address the remote to the receiver, just follow the steps below! Let me know if you have any other questions!

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if it works.

Tommy Faust
DISH Social Media Representative

Posted on Aug 28, 2012

  • Rj DeSanto
    Rj DeSanto Jan 05, 2014

    How do you get to the system info screen if the remote is not working yet?

  • dish
    dish Jan 05, 2014

    Rj, you can access it three ways. If the front of the receiver has a 'System Information' button, you can use that. You can also press 'Menu' twice on the front of the receiver, or power the receiver into Standby and press the 'Up' button on the front.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote paired with other fan in next room. How do i get it off the other reciever?


You should have dip switches on the remote and the receiver in the fan. Usually 4 of them. They are set the same for the communicating pair. Change the dip switches on the fan you do not want operating off the other remote.

Oct 08, 2018 | Dryers

1 Answer

I bought a receiver to pair a Centurion D5 motor with thE Digidoor motor.How do i install the Receiver on a Digidoor motor?


Hi there Vusi.
You should have a manual open and close switch on the wall for your Digidoor. You need to find the two wires which control the open and close functions on the Digidoor Trace these back to the Digidoor motor connect these to the Comm and NO terminals. You also need to supply 12V power to the receiver This needs to be connected to the Possitive and Negative terminals on the receiver. These connections originate in the Digidoor motor housing and can be connected right there. Some Digidoor motors have connection terminals for additional remote receivers in the housing. Remember that the minimum connections needed are Positive, Common(Sometimes the common is also the negative supply so you can bridge the common and negative terminals on the receiver) and NO. Then pair the remote with the receiver as per the instructions in the receiver box. If you still cannot come right post pics of the PC boards of your receiver and Digidoor motor and I will identify the connections for you

Jan 05, 2015 | Televison & Video

1 Answer

What colors are ignition and 12 v


Ignition wire for the radio is RED.
The constant 12v is YELLOW.
BLUE is the remote/power antenna.
ORANGE is for the dimmer.
PURPLE pairs are right rear speakers.
GREEN pairs are left rears speakers.
GRAY pairs are right fronts and
WHITE pairs left fronts speakers. Hope this helps.

May 19, 2011 | Kenwood KDC-MP208 Car CD/ MP3 Player

1 Answer

Says searching but never connects. the yba-10 blinks boes not connect


On RXV3900 using the remote there is a submenu for YBA-10WH (submenu shows Trim, Pair, Connect). Selecting Pair causes the YBA-10WH blue light to flash. Once iPod has Bluetooth set to ON it then displays a box showing "YBA-10WH not connected".

First attempt to connect requires tapping this box which produces the invitation to enter a 4 digit pass code. I had several attempts using pass code for my iPhone - all failed giving message "Make sure yba-10 yamaha is turned on in range and ready to pair". I finally tried keying in a pass code 0 0 0 0 and it paired!

Once turned off subsequent attempts to enable Bluetooth were much easier requiring tapping of the box but not requiring entry of any pass code.

Turn off seems to work easiest by using the remote to select the "Connect" option on the submenu and then selecting Enter on the remote - this caues display of "Disconnected" message on the RXV3900 screen.

Now works fine!

Apr 10, 2011 | Yamaha YBA-10WH Bluetooth Wireless Audio...

1 Answer

Having problems pairing the remote for Samsung un55D8000. Followed directions but continue to get pairing failure.


Make sure to hold the remote near the bottom right of the tv. There is a red LED and an IR receiver there. The remote needs to be pointed at this area and within 6 inches of the tv to pair the Bluetooth. Samsung doesn't mention this anywhere and I almost returned the tv before the salesman told me about this.

Mar 28, 2011 | Samsung Remote Control

2 Answers

TV IS NOT RESPONDING TO REMOTE. I'VE CHANGED THE BATTERIES AND HAVE TRIED OTHER SAMSUNG REMOTES THAT WORK ON MY OTHER TVS. ANY SUGGESTIONS...


Sounds like problem is with TV. Make sure the remote sensor on the TV is not blocked, it is located at the lower right part of the front of the TV.

Dec 12, 2010 | Samsung BN5900696A Remote Control

1 Answer

Remote key is not working


Hello... not sure were the receiver is but the problem is mostly the remote key lost its pairing to the receiver and the receiver itself is good. Check to make sure the batteries are good in the remote key and change them if need be. Then reprogram the key.

Good Luck....

Jun 15, 2010 | 2002 BMW 3 Series

1 Answer

Direct TV remote quits working - conflict with Samsung LCD?


Turned power saving feature on the TV to low and moved the receiver about four feet away from the TV and the remotes work fine now.

Sep 03, 2009 | Samsung TV Remote Control

Not finding what you are looking for?
DISH Network ViP 211 DTV Receiver Logo

1,191 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...