Question about Kyocera FSC2126MFP AllInOne Laser Printer

1 Answer

Error message read close rear cover 1

Have open and closed cover a few times but message still appears

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 14 Answers

There are many many factory modifications/bulletins for that machine, really the tru fix is very time consuming and if you are paying a dealership to repair, it will cost you more than machines value

Posted on Apr 20, 2018

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
leroyal

Leroy Elliott

  • 2120 Answers

SOURCE: keep getting message rear draw open

If you pull the fuser out, look at the bottom of the sliding mechanism for a bent metal tab that actuates a switch when you close the rear drawer.

They get bent pretty easily.

Posted on Jan 23, 2009

acdr

kishor khatri

  • 1913 Answers

SOURCE: I have a Kyocera FS-2000D printer that will not print

first turn off your pritner power.
check open the front door pull your ink cartridge then clean dust and blur from it then check there is not any paper jam then refix ink cartridge.then turn on the power.

Posted on Mar 21, 2009

zsomboribala

zsb001

  • 11 Answers

SOURCE: close rear unit= error code I opened the rear

Easy. You have to seek the problem at the left side underneath the the gears.

Turn it to the bottom.

There is a protruding metal peace. Bend it back to stand vertival. It will slow your problem, but if not feel free to ask!

It helped to me.

Posted on Oct 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brothers Printer MFC 7420 Error Message "Back Door Open" I opened it and closed it several times still getting message. I unpluged it andtried again. Help


Hi. You have to follow these steps: Be very careful:

1. Open front cover, like in this image:
hiddenul_0.gif

2. Pull out your printer's toner cartridge & drum unit:
hiddenul_1.gif

3. Open back cover
hiddenul_2.gif

4. Pull the tab which is in front of you in order to open the rear chute cover.
hiddenul_3.gif

5. If there is any, pull the jammed paper out of the fuser.
hiddenul_4.gif



6. Close back cover and put the cartridge toner & drum unit back where it belongs.
hiddenul_5.gif

7. Close front cover too and see if it works! If your error will still appear, try powering your printer OFF & ON

I hope I helped you!

May 20, 2011 | Office Equipment & Supplies

1 Answer

Message 'Clean Sensor' has appeared. Followed advise to open Cover D and close it again but to no avail. Has anyone got any other suggestions, please?


Follow the steps below to clear the "Clean Sensor" error message.
  1. Open the front cover of the printer (cover D). c2600_cover_d.jpg
  2. Slowly close the cover again. c2600_close_cover_d.jpg This action will move the lever shown below and clean the sensor.
    c2600n_clean_sensor.png
  3. Open and close the cover several times. Once the front cover is left closed the printer will start to calibrate.
Once complete, the error should no longer appear and the printer should resume normal operation.

Note: If the error message is still apparent after following the steps above, contact Epson for further advice.

Nov 16, 2010 | Epson AcuLaser C2600N Printer

1 Answer

I recently replaced the magenta cartridge in my HP 3210 Photosmart printer because the light indicated it needed to be replaced. However, the printer still won't print, and the message still says that I...


Hi,
If you turned the machine off and replaced the cartridge, you can get this error.

Could you try the following procedure below please to clear the error, thanks.
  1. Turn on the unit.
  2. Open the top cover to access the print cartridges.
  3. Remove the new cartridge that is causing the message.
  4. Reinsert the cartridge and close the cover. The following message will appear on the front panel: "Press 1 for new cartridge or press 2 for a used cartridge."
  5. Press the 1 on the numeric keypad of the HP product.
If the message, press 1 for new cartridge or press 2 for a used cartridge, "does not appear after removing and reinstalling the new cartridge, and the low ink warning message still displays,

follow the steps below:
  1. Turn on the unit.
  2. Open the top cover to access the ink cartridges.
  3. After the cartridges stop moving, unplug the power cord.
  4. Remove both cartridges and close the top cover.
  5. Plug the power back in. The unit will reinitialize and a message will appear to insert the cartridges.
  6. Open the top cover and reinsert the ink cartridges. Close the top cover. The message,
  7. Press 1 for new cartridge or press 2 for a used cartridge," should appear.
Hope this helps
Regards.

Apr 18, 2009 | HP Photosmart 3310 Printer

1 Answer

Doc. Cover Open displayed


That usually means some sensor giving you trouble.

This is what brother recomends:

How do I clear the message Cover Open or Please Close Cover from the display?


The message Cover Open or Pls Close Cover may appear if the front cover
for the drum was not closed securely. Verify the cover is closed
securely by pressing the cover release button located in the front of
the unit below the Output Tray Support Flap and open the front cover.
Close the cover until it clicks into place.

If the message continues to appear on the display verify the drum and
toner assembly is installed correctly by following the steps listed
below:

1. Press the cover release button located in the front of the unit and
open the front cover.

2. Remove the drum unit and toner cartridge from the unit by lifting it
up and out. Place it on a drop cloth or disposable paper to avoid
scattering toner.

3. Hold down the blue lock lever located on the right side of the drum
and lift the toner cartridge out of the drum unit.

4. Reinstall the toner cartridge into the drum unit by inserting it in
the drum until it clicks into place

5. Reinstall the drum unit into the unit. Make sure it is securely in
place.

6. Close the cover until it clicks into place


If that doesn't fix it, I guess you will have to talk to their support people.


Good luck!

Dec 15, 2008 | Brother MFC-8840D All-In-One Laser Printer

1 Answer

Check Cover/Cart Message -


if you open the front cover, there is a little white sensor you can see through a slot to the left. this is the sensor for the cover, i just fixed a machine where that little sensor was stuck down to the cover wasn't pushing it in correctly.

Jul 02, 2008 | Canon LaserClass 2060P Plain Paper Fax

2 Answers

Error mesage


No solution, but I have the same problem. THe printer starts up fine, I hear no grinding noises or other "funny" nioses, and then displays no error message... UNTIL I ask it to print. Then I get a message that says, "Pls (please) Open Cover".

I open the cover and it says "Please Close Cover".

I close the cover and it says, "Please Open Cover"

and this happens forever!

Does anyone have any ideas? Can anyone help me?

Stefan

Mar 05, 2008 | Brother MFC-8440 All-In-One Laser Printer

1 Answer

Error message-Close the back cover


It appears that you have a broken back door have a look on the door to see if there is a broken piece of plastic as when you shut the rear door a tab pushes against a push switch letting the machine know that the door is closed. if you cannot see a broken piece then the switch it faulty try this by push a flat screw driver on the switch and check if the message disappears.

Thanks J

Jan 07, 2008 | Brother IntelliFax-2820 Laser Fax

1 Answer

Error message: battery cover open. This message appears in the window and will not let me operate camera until problem is resolved. The cover is closed, but the message will not go away. I have re-set...


try closing the battery cover. if you do not know what that is, it is where the sd card and the battery are held. the cover for that is the battery cover. if it is closed, and still not working, make sure its closed all the way, if it is, take it to best buy or circut city or any other electronics store and ask them.

Dec 12, 2007 | Gateway DC-T50 Digital Camera

4 Answers

"Cover Is Not Open" And The "Lens Cover" Is Open...


the lens cover switch of your camera have a poor contact that why that message is appearing...you have no choice but to disassemble the camera for repairing or cleaning that switch....i suggest you have to go the service center now and don't try open your camera if you are not a technician cause you may damage the flexwire of the lcd monitor if you not properly remove the cover...

Aug 30, 2007 | Sony Handycam DCR-HC21 Mini DV Digital...

Not finding what you are looking for?
Kyocera FSC2126MFP AllInOne Laser Printer Logo

Related Topics:

2,857 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...