Question about ViewSonic VX924 19" LCD Monitor
I had the same problem. My LCD ViewSonic VX 924 has been blinking
For repar it i changed the following capacitors : 100uF/400v
330uF/25v and 330uF/35v
if that always flickers you can also change the two 470uF/25v capacitors
The link for a pic Alime and Capacitors
DO NOT TOUCH NOTHING D'OTHERS ANS DISCONNECT ELECTRICITY CABLE BEFORE PROCEEDING
Posted on Mar 06, 2009
The first thing to check is that your graphic card is not sending an image with an incorrect resolution or refresh rate to the monitor (1280x1024 at 75Hz max). You should also make sure the power cord is fine. And eventually try the monitor on another computer.
We had 4 of theses monitor viewsonic monitors having these symptoms at work. The first 3 were replaced by since they were still under warranty (3 year!).
It was indeed a problem with the power supply unit. I dismantled the monitor and had a close look at the PSU (which is also the inverter in that model). Pair of 680uF 16V capacitors at the top were bumpy and one had its plastic casing melted. Changed these two and the monitor stopped blinking!!!
Although it stopped blinking the back-lighting would turn itself off 3 seconds after it was turned on. (I could still see the picture on the screen but without the back-lighting).
To fix that, I reduced the brightness of the monitor halfway. And it's now working fine! I suppose the inverter board can't handle the full brightness anymore.
Hope this helps.
Posted on Jan 25, 2008
This is a Common problem MOST if NOT ALL, problems like this with this type of fault it is invairably a problem with the Power Supply, in the PSU Electrolytic capacitors dry out and often cause this type of exact problem... It is a relitively simple fix, by replacing the caps with new ones... Any good shop should be able to fix for a modest fee.. OR if ya know anyone handy with a soldering iron maybe they could do it for you there are generally about 4 - 6 to replace... in the PS section, just do them all to be safe
Posted on Jul 30, 2007
It seems to be a common problem for LCD ViewSonic VX 924 at least. Mine was blinking when plugged it in to digital cable and did not work at all with analog one.
There is a powerful transistor at the PSU which overheated so exessive heat damaged capacitors nearby.
In my case I have just replaced the two 470uF/25v capacitors and 330uF/25v
Posted on Apr 29, 2009
I agree with Silverdragon in that it's usually the cheap capacitors used in many monitors. I have fixed several monitors by replacing the capacitors in the power circuit. You can read about it and see pictures here: Fix an LCD Monitor
Posted on Oct 18, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 25, 2011 | Samsung SYNCMASTER 943B 19" LCD Monitor
Oct 11, 2010 | Philips 190B7CB LCD Monitor
Feb 10, 2010 | Samsung 19" LCD Syncmaster 931BW Monitor
Oct 05, 2009 | Acer AL1714 17" LCD Monitor
Dec 12, 2008 | Samsung SyncMaster 204B 20.1" LCD Monitor
Nov 28, 2008 | Computers & Internet
Aug 22, 2008 | Acer AL1714 17" LCD Monitor
Jun 14, 2008 | ViewSonic VX924 19" LCD Monitor
May 31, 2008 | Sceptre X20g-Naga III 20.1" LCD Monitor
May 06, 2008 | Acer AL2216W LCD Monitor
Mar 03, 2018 | ViewSonic VX924 19" LCD Monitor
Mar 17, 2017 | ViewSonic VX924 19" LCD Monitor
25,405 people viewed this question
Usually answered in minutes!