Question about Linksys WRT300N Wireless Router

2 Answers

Linksys WRT300N router issue

My wireless computers can see my router, but can't hook to the internet. The wired computers work fine

Posted by on

  • 2 more comments 
  • upsetuser198 Feb 15, 2009

    I have an N type linsys the computer can hook up to the router and says there is excellent strength. When I open up the web browser it can't pull up any web pages. Any ideas??

  • Doug Boswell
    Doug Boswell Mar 17, 2009

    I too have the WRT300n router, but am trying to use a Belkin Wireless N USB adapter on the remote desktop computer. The monitor says it sees the router, but there is no connection to the internet. Two other wired computers to the same router are working just fine. I have gone through all the security steps (WEP 128), unplugged and replugged the router and the cable modem, and still cannot see the internet.

  • javedassam Apr 08, 2009

    router model WRT300N V2.0, when i connect to router through cable it works fine but the problem is that wireless led is not flashing and it's wireless feature is not working otherwise i am using it with wire and there is no problem. I have done the following steps to solve the problem
    1. Reset to Factory Default Settings
    2. Reset it by pushing Reset button on the back
    3. Ugrading Firmware
    4. Setting up the Wireless settings given on Linksys site
    E-mail: assam_javed@hotmail.com
    Waiting for your reply. Thanks

  •  C. Dante
    C. Dante May 11, 2010

    Do you have any kind of network security enabled?

    When you say "can see my router", do you mean it connects to the router (DHCP or static IP, etc)?

    What is the result if you run cmd.exe with "ipconfig /all"?


×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the wrt300n router it was a little tough working with but it works great. I have 2 linksys cameras hooked up to it. when 1st hooking up have to up plug modem & router plower up router then modem lites should start flashing using wep or not should see routers name from other wireless computer in router.

Posted on Apr 20, 2009

Ad

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

You have to power down all three items , turn on the computer then the modem then the route if this fails hit the reset button on the modem this shoul work for ya

Posted on Apr 06, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a linksys WRT54G, and I'm trying to hook up a wi-fi connection. As of now, my internet is Internet Explorer, and my current modem is a motorola SB5101. The Motorola modem is hooked up directly to...


Hello
Try this

1 disconnect all wires,including power from the modem and router.
2 Find reset button on router usually in the back,need a pen tip or paper clip to hold it in.
3 Hold in reset for 1 min.
4 Reconnect modem first,power up.
5 Reconnect router second, power up.

Try changing the ethernet wire from the modem to the router.

So your going to have your cable coax wire to the modem.Then a ethernet wire from the modem to the router,then a ethernet wire from the router to the computer.

Sounds like you may have one wire in the wrong place.

Dec 29, 2010 | Linksys : WRT54GS Wireless-G Router W/...

1 Answer

I have a linksys wireless g router that worked fine until yesterday. Now it won't connect to the internet. I have a desktop wired to the router and a laptop used wireless.


Check if you can connect to the internet when hooked directly to the modem. If your connection works fine through the modem, then your router needs to be reconfigured.

May 13, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Hook up router and can't access internet from wired computer.


Sometimes the modem-computer-router not "sync" together.
Try this.
1-hook the computer to modem. Internet yes? good.
2-hook the computer to router and check you IP. If it like 192.168.1.2,
the router's DHCP is working.
3-reset router to default setting.
turn off all and turn on modem, router, computer.
keep me posted.

Jul 06, 2009 | Belkin (F5D7231-4) Wireless Router

1 Answer

Internet Connection Problem on One Computer


By any chance, are you trying to use something other than Windows to manage the wireless adapter? If you are, remove it.

Now, Click on Start, right click on Network highlight properties, and click on manage network connections on the Tasks menu.
Your two options will be the icons for your LAN and Wireless Network. Is it enabled and without red or yellow marks? It could be disable, it could be not connected and you can't view wireless networks because the switch is off, or it may just nut see your unsecure network (unlikely).

If the above is clear, right click on the wireless and highlight Properties and left click so it brings up the Networking tab. Highlight IPv4 and click on Properties. Make sure the Obtain dots are ticked. That should work, since you are running unsecured.
If it already is, check the red X or if it isn't click OK and close down the box.

Now, back to where your Wireless card is showing, right click it and you have Disable, Connect/Disconnect, Status, Diagnose etc.

If you're still Disconnected but not Disabled, click on Connect/Disconnect. Does it show your wireless network?

By this time, it should. If it doesn't post back. The other possibility is that you take your computer to a wireless internet cafe, McDonalds, Panera Bread, or motel with WiFi and test it there.

Carl

Jun 21, 2009 | Linksys Wireless-G Broadband Router

1 Answer

My wireless hp says router cannot find host name


Double check your physical connection. It should be this way

Modem > connected to Internet Port of the router
PC > connected to port 1
Laptop > can be wireless

Now you must power cycle your router and modem. Turn off router first then modem. Wait for 30 seconds. Power on modem first, then the router. You must configure the wireless settings on your laptop it doesn't connect automatically.

Jun 14, 2009 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

No Active Internet Connection


If you want to use the wireless portion of your router, you would need a wireless adapter installed on your desktop. If you are getting internet on your desktop then this means that your wired connection is fine to the router is fine. The WMP54G adapter will work with your router, however if you are not planning on connecting to the internet wirelessly through the router then there is no need to purchase the adapter. Hope that this helps you out.

Serge C.

Mar 30, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Can't get a wireless router to work with a speedstream 4200


This may actually be an issue with your ISP. There is a good possiblity that your ISP has bound your connection to the MAC address of the network card on your computer. This is a common occurance which is why router manufacturers give you the option of having your router clone your computer's MAC address. Go into your router's management an perform the clone, sorry I cannot give you more details but I don't know the specific model of your Belkin router.

Jan 05, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Hooking up a second computer


If your HP computer is connected with a wire to the router, you don't need to run or install the setup CD of the router you just need to connect the HP computer to the router with an ethernet cable and restart the HP computer and internet should already be working fine, But if your Hp computer is going to work wirelessly with the router meaning the HP will not be connected with a wire to the router, You just need to connect to the wireless network of your router if your not familiar with that I will advice you to call Linksys tech support so one of their tech can walk you through with that process they are open 24/7 this is the number 800-3267114.........

Hope that helps............

Sep 23, 2008 | Linksys Wireless-G WRT54GS Router...

2 Answers

Linksys wireless problem


hiya krazy327... sorry to hear about your prob.. we,ve all been here at some point!

Can you let me know if it is one specific computer that the problem is with?

If so .. how are you wired to the router "True" wireless or usb/ethernet gateway from the router?

Regards Faggly

Mar 18, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Linksys WRT300N Wireless Router Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...