Question about Samsung CLX-3175FW Multifunction Laser Color Printer

1 Answer

Samsung clx-3185 sensors error #A3-3311 - Samsung CLX-3175FW Multifunction Laser Color Printer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Sensor failure #a3-3311

Posted on Dec 01, 2012

  • gopinath.v Dec 01, 2012

    soliuton pls

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 5 Answers

SOURCE: Deve Home sensor Error as occur cannot get printer to work

The web does not offer alot on this error. However the users manual indicates it is a fuser issue. Try a new maintenance kit. That should include the fuser and all rollers.

Posted on Feb 26, 2009

Yue Fan

  • 12 Answers

SOURCE: deve home sensor error

This can be fixed by stretching out a solenoid spring on the power cord side of the printer. The solenoid acts as a clutch to stop the spinning developer actuator at the right spot.

Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.

The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.

05b7f3b.jpg

More pictures of the solenoid on Facebook:
http://www.facebook.com/#!/photo.php?pid=55779771&id=2257206&fbid=10100154259704133

Posted on Jul 10, 2010

Yue Fan

  • 12 Answers

SOURCE: deve home sensor error on samsung clx-3160

This can be fixed by stretching out a solenoid spring on the power cord side of the printer. The solenoid acts as a clutch to stop the spinning developer actuator at the right spot.

Below steps are for the CLP-300 which has the same Imager/Developer. It's just a bit more involved taking off the top in the CLX-3160.

Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.

The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.

05b7f3b.jpg

More pictures of the solenoid on Facebook:
http://www.facebook.com/#!/photo.php?pid=55779771&id=2257206&fbid=10100154259704133

Posted on Jul 10, 2010

Yue Fan

  • 12 Answers

SOURCE: i am getting deve home sensor error on my samsung

Dev. Home error can be fixed by stretching out a solenoid spring on the power cord side of the printer. The solenoid acts as a clutch to stop the spinning developer actuator at the right spot.

The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.

Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.



05b7f3b.jpg

More pictures of the solenoid on Facebook:
http://www.facebook.com/#!/photo.php?pid=55779771&id=2257206&fbid=10100154259704133

Posted on Jul 10, 2010

Yue Fan

  • 12 Answers

SOURCE: samsung clx-3160fn deve home sensor error

Dev. Home error can be fixed by stretching out a solenoid spring on the power cord side of the printer. The solenoid acts as a clutch to stop the spinning developer actuator at the right spot.

The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.

Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.



05b7f3b.jpg

More pictures of the solenoid on Facebook:
http://www.facebook.com/#!/photo.php?pid=55779771&id=2257206&fbid=10100154259704133

Posted on Jul 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung clx 3185 printing is all faded, colors and black


When you go to print, your printer driver should have quality options. Make sure you're not using "economy" or "draft" mode. Try "quality" mode.

Jan 19, 2015 | Samsung Office Equipment & Supplies

1 Answer

How do I fix Samsung Clx-3185 Fuser


The micro "flag" located at the fuser has been broken or dislocated or some gears broken and fuser not spinning.
If you cannot get spares, buy a new printer

May 06, 2014 | Samsung Clx 3185 Multifunction Printer...

1 Answer

How to fix image unit error in samsung CLX-3185


hi, please clean the drum unit contact,the then put in to the printer

Apr 07, 2014 | Samsung Office Equipment & Supplies

1 Answer

Output bin full


there is a sensor in the compartment that your paper comes out in to. it must be stuck or broken

Jan 27, 2014 | Samsung CLX-3185 Color Laser MFP

1 Answer

Samsung clx 3185 error code u1-2112. turn power off and on but still wont fix the unit


firstly restart the printer, if same error is comimg.
then,

fuser error. replace fuser unit

Oct 26, 2013 | Samsung CLP 315 Laser Printer

2 Answers

Samsung CLX-3185


Hi
Have you checked the cartridges access door?
If so,try disconnecting the printer and leaving it for a long period [like 1hr] before connecting again.

Feb 28, 2012 | Samsung CLX3185 AllInOne Laser Printer

Not finding what you are looking for?
Samsung CLX-3175FW Multifunction Laser Color Printer Logo

2,866 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...