Question about Akai PTH5498 54" Rear Projection HDTV-Ready Television

2 Answers

AKAI MODEL # PT5492S --54" TV --NEED PART

MY TV WON'T TURN ON , YOU CAN HEAR A BUZZING SOUND AND THE TIMER LIGHT ON THE FRONT OF THE TV STAYS ON , CAN'T TURN OFF TV WITH BUTTON OR REMOTE , MUST UNPLUG TV. I NEED PART # AA4100197C ,IT'S A POWER BOARD. AKAI SAID THEY CANCELED THE PART AND DID NOT MAKE A REPLACEMENT PART FOR THIS TV, MODEL # PT5492S. MY TV IS ONLY 4 YRS OLD . CAN ANYONE TELL ME WHWERE I MIGHT FIND THIS PART .THANKS

Posted by on

  • 1 more comment 
  • RPENNY Nov 18, 2007

    My AKAI PT5492S will not come on. The red timer light stays on and goes off only after I unplug the TV. Any suggestions?

  • sawydmg Oct 03, 2008

    TV went off while playing with no prior warning. The red timer light stays on and I can hear what sounds like a cycling noise coming from the set. It will not turn on with the remote control or the manual button on the front of the set.



    The set has been working fine until now.

  • Anonymous Mar 20, 2014

    No sound. Picture is fine. When tv is turned off red timer in stand by light by power button on tv stays lit. tv worked fine yesterday turned it on today and now no sound

×

Ad

2 Answers

EBAY. Want it Now

Posted on Jun 18, 2007

Ad

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I contacted partstore.com. they were able to give me a part # for the board that you need. it was around $120. your problem may be more extensive than this though. was there any other service done to the set prior to this happening?

Posted on Oct 15, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my LG 42PG25 plasma TV? The model number is 42PG60UA. What should I try next see details below?


It is 19 years old, and I would say beyond economical repair. You will be chasing blown components that were damaged when the power surge or brownout occurred. It is only a 42" set and it is plasma. Technology has moved on to 4K Ultra HD, LED and smart hubs. Treat yourself, it's Christmas :>)

Dec 19, 2017 | LG Televison & Video

1 Answer

Standby/timer light stays on red. no picture or sound on tv.


this is a simple capacitor fix at your local tv guy..should be 100 to $150 max

Apr 09, 2014 | Sony KP-48S75 48" Rear Projection...

1 Answer

Sansung model 56 Inch hpl5663w first had a buzzing sound the tv repair man said it might be a color wheel but the tv played well except for the low buzzing sound . then one night the picture went black and...


Hi Charles,

Sorry for the late reply, I'm offline upon purchasing my service.
You have said that you can hear a low buzzing sound before the unit gone to subsequent shutdown and the lamp blinks green(meaning that the unit try to turn on the lamp for consecutive attempts but not generally mean that the lamp itself is faulty.) and the temp led light come on.

As a matter of fact all the information you have mentioned linked to the symptoms you've encountered right now. A low buzzing sound might be caused by faulty FAN inside the unit that trigger the error code (blinking of the standby/temp led light) and turns off the unit automatically due to thermal protection circuit.
However, the technician might be true also that the buzzing sound came from the faulty color wheel. To confirm it, you have to verify where the buzzing sound came from. Color wheel is in front of the lamp assembly. Faulty color wheel can produce the same symptoms you've encountered right now but most of the time, it shows 3 blinking led light at the front panel (Timer, Lamp, standby/Temp).

I would advice you to open the back cover of your unit, fixed the lamp door safety switch with the tape to make it in closed position( if it is on open position the unit will not power up), and then turn on the unit and observe the fans if will spin or not, and check also where the buzzing sound came from before the unit gone to shutdown.
I've suspected that the fault came from the fan based on the led light flashes. Please let me know what you will discover after following the steps above to verify where the exact fault came from. Also, let me know the exact status of the led light at the front panel, (Timer, Lamp, standby/Temp ), which of them lit solid/blinking, it will help us to narrow the caused of the symptoms.

Jdvillanueva

Oct 14, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

My RCA Truflat T.V won't turn on and the FPA lock is turned on, I have the original remote. what should i do?


TV won't turn on • Press the TV button. Make sure the TV is plugged in.• Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.• Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control solutions on page 26.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).Buttons don't work
• If you're using the remote control, press the TV button first to make sure the remote is in TV mode.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).• Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.TV turns off unexpectedly • Sleep timer might have been activated. Go to page 24 for instructions.• KidPass might have been activated. Go to page 21 for instructions.• Wake-Up timer turned on the TV and no remote or front panel buttons were pressed for two hours.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then
turn on again. If this happens frequently, the voltage in your house may be abnormally high or low.
• Unplug TV. Wait five minutes. Plug it in again.

Sep 16, 2011 | RCA 20F420T 20" TV

1 Answer

Have lost instructions to Emerson universal jumbo remote


Using Code Search:

1. Turn on the device you want to program into the remote.
2. Point your remote control at the device
3. Press and hold the "Code Search" button for about 3 seconds until the light on the remote stays on.
4. Press the button on the remote for the device you want to program. Push the "TV" button to program the TV, press the "DVD" button to program the DVD player, etc. The light on the remote control will blink and stay on.
5. Slowly press and release the power button repeatedly until the device turns off. Each time you push the power button the light should blink once.
6. Press "Enter" to save the code into the remote and the light will turn off.

Program a Manual Code:

1. First turn on the device that you want to program such as your TV or DVD player.
2. Point your remote control at the device.
3. Press the button on the remote that corresponds to the device. If you want to program the TV, press the TV button.
4. Press the "Code Search" button for about 3 seconds until the light stays on.
5. Enter the code for your device using the number pad. The light will blink each time you push a button. If the code works, the light will turn off. If the light flashes, that means the code did not work. There may be multiple codes for a device. If a code does not work, start from the beginning by holding down code search until the light stays on and use a new code.
6. Press the power button to test if your device turns off. It it does not turn off, repeat the process with a new code.

Retrieving the Code for your Device:

If you used the code search function to program your device and want to know the code for future reference, you can retrieve the code from the remote. To do this:

1. Press and hold the Code Search for 3 seconds until the light stays on.
2. Press the device button for the code you want to retrieve. Press TV to get the TV code, etc. The light will blink once and stay on.
3. Press the number buttons from 0 to 9. When the light blinks once, that signals the first number of the code.
4. Repeat for the 2nd and 3rd digits of the code. The light will turn off after you retrieve the 3rd digit.

Programming the Sleep Setting:

1. Press and hold the "SLEEP" button until the light stays on.
2. Use the number pad to enter 2 digits for how many minutes to use for the timer (01 to 99 minutes). The light will turn off and start timing.
3. Make sure the remote is pointing at your device.
4. To cancel the sleep timer, press the power button once or hold down the sleep button until the light flashes once.

Here is a list of the Emerson Universal Codes:
http://www.jumboremotecontrol.com/remote_control_code_list.html

Here is a copy of your manual: http://www.jumboremotecontrol.com/innovage_jumbo_remote_manual.PDF

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Mar 08, 2011 | Televison & Video

2 Answers

My Loewe Aconda TV will not turn on - buzzing noise.


My Loewe Aconda 81 HDR TV will not turn on. When I press the power button the green light comes on but the red light stays on with it and after a few seconds the green light goes out and the red light stays on. Any help please.

May 15, 2010 | Loewe Aconda ACO9383 38" TV

1 Answer

Timer light keeps flashing


sounds a s if you have ablockage within oyour pump assy, remove th elower acess panel and undo the "button trap" your problaby clogged up, the drain pump is humming, causeit cant pump any water

Jan 24, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Standby/timer light stays on red. no picture or sound on tv.


my sony red light flash.but it will not turn on just clicks

Nov 26, 2008 | Sony KP-48S75 48" Rear Projection...

1 Answer

Timer light is flashing but tv wont turn on!


When the timer light stoped flashing the remote control would not turn on the TV. The next time the light quit flashing I held the power button in on the TV for about 5 seconds and it came on and has had no problems since then with the remote or the local TV power button.

Greg Allen

Aug 29, 2008 | Mitsubishi Televison & Video

1 Answer

Power loss reset the timer.


Good Day, Nyung; First try ro reset TV, unplug TV from the wall for 3 - 4 minutes then plug back into wall ac outlet; 2. This model is equipped with a keyboard lock feature. To unlock the keyboard press and hold the "menu" button on the front panel for 10 seconds. I hope this was helpful, big IRISH.

Apr 10, 2008 | Mitsubishi WT-46809 46" Rear Projection...

Not finding what you are looking for?
Akai PTH5498 54" Rear Projection HDTV-Ready Television Logo

Related Topics:

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

KISHORE DESHPANDE

Level 2 Expert

64 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...