Question about ViewSonic Optiquest Q19wb LCD Monitor

Open Question

Manual for Optiquest Q9B-2 monitor model VS11201

Power light comes on or blinks but no picture, do i need a special driver

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
budmrtn

Bud Martin

  • 11361 Answers

SOURCE: when I power on my viewsonic monitor it flickers

After 2 years, more likely the caps will be bad by now, worst case will be bad lamps, open it up and look inside for caps with bulging top first, see example of failed monitors due to bad caps/lamps: http://s807.photobucket.com/home/budm/allalbums
Post back what you see so we can guide you further.

Posted on Feb 14, 2010

Ad
budmrtn

Bud Martin

  • 11361 Answers

SOURCE: optiquest vs11201 monitor not above 640x480 resolution

You need to download the driver from DELL for your video card, my 3000 use video driver R79733.EXE.
You may have virus in your computer if you cannot update the drivers, sometime it is better to start from clean drive to help get rid of stuff that get installed into the computer.

Posted on Apr 13, 2010

sghill

  • 80 Answers

SOURCE: optiquest q9b-2 blank white screen (lights up

Often problems with LCD monitors can be traced to bad capacitors. The following sites will help you identify if your monitor has bad capacitors, and how to replace them.

www.fixyourmonitor.com and http://www.youtube.com/watch?v=9Q6_TgNJvQw

Good Luck!

Posted on Jun 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsonic optiquest flat panel lcd monitor power light flashes on and off with a popping niose


Look for bad caps with bulging/leaking tops as shown here:
http://s807.photobucket.com/albums/yy352/budm/OPTIQUEST/Optiquest%20Q9B/

Very common problem in all LCD monitors as you can see in my albums.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Oct 26, 2011 | ViewSonic Optiquest Q9b 19" Flat Panel LCD...

1 Answer

In moving I lost my manual. How do I get a new one? Optiquest Q9B-2 Model VS11201 Serial Q5W063149765 Excellent product-never a problem. Just need to adjust focus.


Please double check the printer's model, the one you specified does not seems to be a printer model. Also where did you bought from (country).

Waiting clarification, don't hesitate to post.

Thanks and regards
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Jul 04, 2011 | Office Equipment & Supplies

1 Answer

Optiquest vs11201 monitor not above 640x480 resolution


You need to download the driver from DELL for your video card, my 3000 use video driver R79733.EXE.
You may have virus in your computer if you cannot update the drivers, sometime it is better to start from clean drive to help get rid of stuff that get installed into the computer.

Apr 12, 2010 | ViewSonic Optiquest Q19wb LCD Monitor

1 Answer

When I power on my viewsonic monitor it flickers and the screen doesn't come on. It is a 19" Optiquest model number VS11201 that I have had for 2 years.


After 2 years, more likely the caps will be bad by now, worst case will be bad lamps, open it up and look inside for caps with bulging top first, see example of failed monitors due to bad caps/lamps: http://s807.photobucket.com/home/budm/allalbums
Post back what you see so we can guide you further.

Feb 13, 2010 | ViewSonic OptiQuest Monitor

1 Answer

Optiquest q9b-2 blank white screen (lights up when powered up) no video ??no problem with computer, video fine on another monitor, tried this monitor on several computers same problem, blank white...


Often problems with LCD monitors can be traced to bad capacitors. The following sites will help you identify if your monitor has bad capacitors, and how to replace them.

www.fixyourmonitor.com and http://www.youtube.com/watch?v=9Q6_TgNJvQw

Good Luck!

Feb 06, 2010 | ViewSonic Optiquest Q19wb LCD Monitor

1 Answer

LCD doesn't power up, light just blinks


Look at the power supply first; look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find

Nov 27, 2009 | ViewSonic Optiquest Q9b 19" Flat Panel LCD...

4 Answers

DCAC40A4 power converter failure


I think this is a dipped .33 uf or 3300pf 250v cap. I thought tantalum, but none are available at 250v, so I think it is ceramic.

http://www.badcaps.net/ has a forum and a section for computer displays. There is a recent post on a viewsonic there.

digikey.com has low cost/order shipping fees, mouser.com has parts too.
tom

Nov 19, 2009 | ViewSonic Optiquest Q9b 19" Flat Panel LCD...

1 Answer

Vga cable for a optiquest (viewsconic lcd monitor


I have a whole box of them

send me your address. no charge

Aug 03, 2017 | ViewSonic Optiquest Q19wb LCD Monitor

1 Answer

Momitor


Probable source of the problem is the horizontal output (and high voltage) circuit although it can be killing the video earlier than that too. First step would be to dis- and reconnect the video cable to ensure it isn't a simple contact problem.
Second, using the brightness and contrast controls to see if anything is still visible. If you have a single horizontal line across the screen, then the problem is in the vertical deflection circuit instead.
If you have nothing, turn the monitor off, wait a few seconds and then back on. If you get a picture first then only a dot, its back to the horizontal circuit again. Try to note how it dies.
You may be able to somewhat diagnose the problem this way but that is a long way from a repair and with the cost of labor and possible unavailability of some parts, you should get an estimate before repairing it since it is possible that replacing it is cheaper. This is not really a DIY project unless you have technical background and a couple of test instruments.    

Nov 01, 2008 | Computers & Internet

1 Answer

Not on


try eBay ressurectek for repairing you inverter/power supply board. If you have the one transformer (q9b-2) version, he says he can fix it.
tom

Sep 26, 2008 | ViewSonic Optiquest Q9b 19" Flat Panel LCD...

Not finding what you are looking for?

Open Questions:

See all ViewSonic Optiquest Q19wb LCD Monitor Questions

ViewSonic Optiquest Q19wb LCD Monitor Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...